diff --git a/source/gs_creating_bootable_usb.rst b/source/gs_creating_bootable_usb.rst
index 4c5ddcf0..ac96f686 100644
--- a/source/gs_creating_bootable_usb.rst
+++ b/source/gs_creating_bootable_usb.rst
@@ -11,16 +11,13 @@ OS by :ref:`vm-kvm`.
 What you need
 =============
 
-* A USB stick, formatted as ``ext4``. Remember that the process of flashing
-  data to a USB completely deletes the contents of the drive; as always, run
-  ``dd`` with caution.
-* A Clear Linux* OS for Intel® Architecture image; the most current version can
-  be found here:  
+* A USB stick, formatted as ``ext4``. Remember that the process of 
+  flashing data to a USB completely deletes the contents of the
+  drive; as always, run ``dd`` with caution.
+* A Clear Linux* OS for Intel® Architecture image; the most current
+  release versions can be found at the following link:
   `https://download.clearlinux.org/image <https://download.clearlinux.org/image>`_
-
-    .. tip::
-
-     For older versions, see our `downloads page <https://download.clearlinux.org/>`_.
+* Older versions can be found on our `downloads page`_.
 
 
 Download and checksum
@@ -31,38 +28,43 @@ Download and checksum
 $ wget https://download.clearlinux.org/image/clear-[release_number]-installer.img.xz
 $ sha512sum clear-[release_number]-installer.img.xz`
 
+
 Confirm the mount point on the USB drive
 ========================================
 
-Using ``$ lsblk`` is helpful to show the block-level devices; a USB drive
-usually shows up under ``/sdb`` or ``/sdc`` (almost never ``/sda``), and should
-indicate disk space approximately the size of the USB drive::
+Using ``$ lsblk`` is helpful to show the block-level devices; 
+a USB drive usually shows up under ``/sdb`` or ``/sdc`` (almost never
+under ``/sda``), and should indicate disk space approximately the 
+size of the USB drive::
 
 	$ lsblk /dev/sdb
 	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
 	?? sdb  8:16 1 14.9G 0
 	?? sdb1 8:17 1 14.9G 0 part
 
-and make sure the drive isn't already mounted. The easiest way is with ``umount`` or
+Make sure the drive isn't already mounted. The easiest way is with 
+``umount`` or
 
 ::
 
 	# df
 
+
 Flash the image to the USB
 ==========================
 
-Flash the image with the following command, adding the ``-v`` option for verbose mode
-(recommended), as the image file may be large, and the process can take a while. This
-may need to be done as root or with sudo::
+Flash the image with the following command, adding the ``-v`` option 
+for verbose mode (recommended), as the image file may be large, and the 
+write can take a while. This may need to be done as root or with sudo::
 
   $ xzcat -v clear-[release_number]-installer.img.xz | dd of=/dev/sdb
 
+
 Wait for the final confirmation
 ===============================
 
-This example shows ``clear-9130-installer.img.xz`` flashed to a 16GB USB drive
-mounted on ``/sdb``.
+This example shows ``clear-9130-installer.img.xz`` flashed to a 16GB 
+USB drive mounted on ``/sdb``.
 
 .. image:: _static/images/gs_confirmation_screen.png
    :align: center
@@ -70,3 +72,7 @@ mounted on ``/sdb``.
 
 Success!  Your USB stick is now ready to boot and initiate the process for
 :ref:`gs_installing_clr_as_host`.
+
+
+
+.. _downloads page: https://download.clearlinux.org