From 45c35257a6f4eec9a871d440c80edd29e36f1074 Mon Sep 17 00:00:00 2001 From: Michael Vincerra Date: Mon, 19 Nov 2018 12:54:28 -0800 Subject: [PATCH] Removes trailing white space. Signed-off-by: Michael Vincerra --- .../bare-metal-install-beta.rst | 413 +++++++++--------- 1 file changed, 206 insertions(+), 207 deletions(-) diff --git a/source/clear-linux/get-started/bare-metal-install-beta/bare-metal-install-beta.rst b/source/clear-linux/get-started/bare-metal-install-beta/bare-metal-install-beta.rst index 5cf526d4..05c1ad90 100644 --- a/source/clear-linux/get-started/bare-metal-install-beta/bare-metal-install-beta.rst +++ b/source/clear-linux/get-started/bare-metal-install-beta/bare-metal-install-beta.rst @@ -3,10 +3,10 @@ Install |CL-ATTR| from the live desktop beta image ################################################## -The live desktop beta image allows you to boot |CL-ATTR| into a GNOME -desktop without modifying the host system. Using the live image, you can -explore the possibilities of developing with |CL|. You can also launch the -new installer and install |CL| on your target system. +The live desktop beta image allows you to boot |CL-ATTR| into a GNOME +desktop without modifying the host system. Using the live image, you can +explore the possibilities of developing with |CL|. You can also launch the +new installer and install |CL| on your target system. .. contents:: :local: :depth: 1 @@ -14,19 +14,19 @@ new installer and install |CL| on your target system. System requirements ******************* -Assure that your target system supports the installation: +Assure that your target system supports the installation: * :ref:`system-requirements` * :ref:`compatibility-check` -Preliminary steps +Preliminary steps ***************** -#. `Navigate to the image directory`_. +#. `Navigate to the image directory`_. #. Download the file :file:`clear--live-desktop-beta.img.xz` - .. note:: + .. note:: ```` is the latest |CL| auto-numbered release. @@ -42,15 +42,15 @@ Install from live image *********************** After you've downloaded and burned the live desktop image on a -USB drive, follow these steps. +USB drive, follow these steps. #. Insert the USB drive into an available USB slot. #. Power on the system. -#. Open the system BIOS setup menu by pressing the F2 key. +#. Open the system BIOS setup menu by pressing the F2 key. - .. note:: + .. note:: Your BIOS setup menu entry point may vary. @@ -64,9 +64,9 @@ USB drive, follow these steps. Launch the installer ==================== -#. After the |CL| live desktop image boots, select the :guilabel:`Activities` menu in the upper left. +#. After the |CL| live desktop image boots, select the :guilabel:`Activities` menu in the upper left. -#. Select the icon, :guilabel:`Install Clear Linux OS`, shown in Figure 1. +#. Select the icon, :guilabel:`Install Clear Linux OS`, shown in Figure 1. .. figure:: figures/bare-metal-install-beta-1.png :scale: 50 % @@ -82,37 +82,37 @@ Launch the installer Figure 2: Clear Linux OS Installer -.. _minimum-installation-requirements: +.. _minimum-installation-requirements: Minimum installation requirements ********************************* -To fulfill minimum installation requirements, complete +To fulfill minimum installation requirements, complete :guilabel:`Required options`. All other menu items are optional. .. note:: - * In the Main menu, the :kbd:`Install` button is highlighted + * In the Main menu, the :kbd:`Install` button is highlighted **only after** you complete :ref:`required-options-installation`. * You must choose whether or not to participate in :ref:`telemetrics` before you can :ref:`finish-cl-installation`. - * You may wish to :ref:`test-network-settings` before you + * You may wish to :ref:`test-network-settings` before you :ref:`configure-network-interfaces`. Assure that a ``Success`` message is received. Main menu ********* -In the |CL| Installer main menu, two tabs appear: +In the |CL| Installer main menu, two tabs appear: :guilabel:`[R] Required options` and :guilabel:`[A] Advanced options`. Navigate between tabs using the arrow keys or these shortcut keys: * :kbd:`Shift+A` for :guilabel:`[A] Advanced options` * :kbd:`Shift+R` for :guilabel:`[R] Required options` -To meet the minimum requirements, enter your choices in the -:guilabel:`Required options`. After confirmation, your selections appear +To meet the minimum requirements, enter your choices in the +:guilabel:`Required options`. After confirmation, your selections appear below menu options in the Main Menu, beside the :guilabel:`>>` chevron. Navigation @@ -171,17 +171,17 @@ Choose Language #. In :guilabel:`Select System Language`, navigate to your desired language. -#. Select :kbd:`Tab` to highlight :kbd:`Confirm`. +#. Select :kbd:`Tab` to highlight :kbd:`Confirm`. #. Select :kbd:`Enter` to :kbd:`Confirm`. - - .. note:: - Select :guilabel:`Cancel` to restore the previously defined value and return to the main menu. + .. note:: + + Select :guilabel:`Cancel` to restore the previously defined value and return to the main menu. .. figure:: figures/bare-metal-install-beta-5.png :scale: 100 % - :alt: Select System Language + :alt: Select System Language Figure 5: :guilabel:`Select System Language` @@ -191,20 +191,20 @@ Configure the Keyboard #. From the main menu, select :guilabel:`Configure the Keyboard`. -#. Select :kbd:`Enter`. +#. Select :kbd:`Enter`. #. In :guilabel:`Select Keyboard`, navigate to the desired option. #. In :guilabel:`Test keyboard`, type text to assure that the keys map to - your keyboard. + your keyboard. #. Select :kbd:`Tab` to highlight :guilabel:`Confirm`. #. Select :kbd:`Enter` to :kbd:`Confirm`. - .. note:: + .. note:: - Select :guilabel:`Cancel` to restore the previously defined value and return to the main menu. + Select :guilabel:`Cancel` to restore the previously defined value and return to the main menu. .. figure:: figures/bare-metal-install-beta-6.png :scale: 100 % @@ -218,16 +218,16 @@ Configure Media #. From the main menu, select :guilabel:`Configure Media`. .. note:: - - Available media appear by default. -#. Navigate to the desired media until highlighted. + Available media appear by default. - .. TODO: Add another screenshot showing contextual menu. +#. Navigate to the desired media until highlighted. + + .. TODO: Add another screenshot showing contextual menu. #. Select :kbd:`Enter` or :kbd:`Spacebar` to select it. - Two options for partitioning appear. + Two options for partitioning appear. #. Select :guilabel:`Auto Partition` to accept the default configuration, or :guilabel:`Add Partition` to add partitions manually. See instructions @@ -235,53 +235,53 @@ Configure Media .. figure:: figures/bare-metal-install-beta-7.png :scale: 100 % - :alt: Configure Media menu + :alt: Configure Media menu Figure 7: :guilabel:`Configure Media menu` - .. note:: + .. note:: - Use additional options as necessary during partitioning: + Use additional options as necessary during partitioning: - * Select :guilabel:`Revert` to cancel changes and revert to the - original configuration. - * Select :guilabel:`Rescan` to show media connected to the host + * Select :guilabel:`Revert` to cancel changes and revert to the + original configuration. + * Select :guilabel:`Rescan` to show media connected to the host machine. #. Select :kbd:`Enter` to :kbd:`Confirm`. -Choose one partitioning option below +Choose one partitioning option below ------------------------------------ -* :ref:`auto-partition` -* :ref:`add-partition` +* :ref:`auto-partition` +* :ref:`add-partition` -.. _auto-partition: +.. _auto-partition: Auto Partition ============== -Auto partition will configure the media to meet the minimum requirements. +Auto partition will configure the media to meet the minimum requirements. -#. Select :guilabel:`Auto Partition` as shown in Figure 8. +#. Select :guilabel:`Auto Partition` as shown in Figure 8. -#. Select :kbd:`Enter` or :kbd:`Spacebar` to highlight - :guilabel:`Auto partition`. +#. Select :kbd:`Enter` or :kbd:`Spacebar` to highlight + :guilabel:`Auto partition`. #. Select :kbd:`Enter` to :kbd:`Confirm`. - This action returns you to the Main Menu. + This action returns you to the Main Menu. .. figure:: figures/bare-metal-install-beta-8.png :scale: 100 % - :alt: Auto Partition + :alt: Auto Partition Figure 8: :guilabel:`Auto Partition` -#. You may skip to the :ref:`telemetry-tui` section below. +#. You may skip to the :ref:`telemetry-tui` section below. -.. _add-partition: +.. _add-partition: Add Partition ============= @@ -289,104 +289,104 @@ Add Partition Minimum requirements ==================== -To add partitions manually, assign partitions per the minimum +To add partitions manually, assign partitions per the minimum requirements shown in Table 1: .. list-table:: **Table 1. Disk Partition Setup** :widths: 33, 33, 33 :header-rows: 1 - * - FileSystem + * - FileSystem - Mount Point - Minimum size * - ``VFAT`` - /boot - 150M * - ``swap`` - - + - - 256MB * - ``root`` - / - - *Size depends upon use case/desired bundles.* + - *Size depends upon use case/desired bundles.* -#. In the Configure Media menu, select :guilabel:`Add Partition`. +#. In the Configure Media menu, select :guilabel:`Add Partition`. - .. note:: To change an existing partition, navigate to the partition, + .. note:: To change an existing partition, navigate to the partition, and select :guilabel:`Enter`. boot partition -------------- -#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to +#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to select the file system type. See Figure 9. -#. In :guilabel:`Mount Point`, enter the ``/boot`` partition. +#. In :guilabel:`Mount Point`, enter the ``/boot`` partition. #. In :guilabel:`Size`, enter an appropriate size (e.g., 150M) per Table 1. -#. Navigate to :guilabel:`Confirm` until highlighted. +#. Navigate to :guilabel:`Confirm` until highlighted. -#. Select :guilabel:`Enter` to confirm. +#. Select :guilabel:`Enter` to confirm. .. figure:: figures/bare-metal-install-beta-9.png :scale: 100 % - :alt: boot partition + :alt: boot partition Figure 9: :guilabel:`boot partition` swap partition -------------- -#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to +#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to select the file system type. See Figure 10. -#. In :guilabel:`Mount Point`, the field remains blank. +#. In :guilabel:`Mount Point`, the field remains blank. - .. note:: + .. note:: - The Mount Point field is disabled. + The Mount Point field is disabled. #. In :guilabel:`Size`, enter an appropriate size (e.g., 256MB) per Table 1. -#. Navigate to :guilabel:`Add`. +#. Navigate to :guilabel:`Add`. -#. Select :guilabel:`Enter` to continue. +#. Select :guilabel:`Enter` to continue. .. figure:: figures/bare-metal-install-beta-10.png :scale: 100 % - :alt: swap partition + :alt: swap partition Figure 10: :guilabel:`swap partition` root partition -------------- -#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to +#. In the :guilabel:`File System` menu, select :kbd:`Up/Down` arrows to select the file system type. See Figure 11. #. In :guilabel:`Mount Point`, enter ``/root``. #. In :guilabel:`Size`, enter an appropriate size per Table 1. - .. note:: + .. note:: - The remaining available space shows by default. + The remaining available space shows by default. -#. Navigate to :guilabel:`Add` until highlighted. +#. Navigate to :guilabel:`Add` until highlighted. -#. Select :guilabel:`Enter` to continue. +#. Select :guilabel:`Enter` to continue. - You are returned to the :guilabel:`Configure media` menu. + You are returned to the :guilabel:`Configure media` menu. -#. Select :guilabel:`Confirm` to complete the media selection. +#. Select :guilabel:`Confirm` to complete the media selection. .. figure:: figures/bare-metal-install-beta-11.png :scale: 100 % - :alt: root partition + :alt: root partition Figure 11: :guilabel:`root partition` - You are returned to the :guilabel:`Configure media` menu. Your partitions should appear similar to those shown in Figure 12. + You are returned to the :guilabel:`Configure media` menu. Your partitions should appear similar to those shown in Figure 12. .. figure:: figures/bare-metal-install-beta-12.png :scale: 100 % @@ -396,20 +396,20 @@ root partition #. Navigate to :guilabel:`Confirm` until highlighted. -#. Select :guilabel:`Enter` to complete adding partitions. +#. Select :guilabel:`Enter` to complete adding partitions. -.. _telemetry-tui: +.. _telemetry-tui: Telemetry ========= -To fulfill the :guilabel:`Required options`, choose whether or not to -participate in `telemetry`_. :ref:`telemetrics` is a |CL| feature that -reports failures and crashes to the |CL| development team for improvements. -For more detailed information, see our :ref:`telemetry-about` page. +To fulfill the :guilabel:`Required options`, choose whether or not to +participate in `telemetry`_. :ref:`telemetrics` is a |CL| feature that +reports failures and crashes to the |CL| development team for improvements. +For more detailed information, see our :ref:`telemetry-about` page. -#. In the main menu, navigate to :guilabel:`Telemetry` and select - :kbd:`Enter`. +#. In the main menu, navigate to :guilabel:`Telemetry` and select + :kbd:`Enter`. #. Select :kbd:`Tab` to highlight your choice. @@ -417,82 +417,82 @@ For more detailed information, see our :ref:`telemetry-about` page. .. figure:: figures/bare-metal-install-beta-13.png :scale: 100 % - :alt: Enable Telemetry + :alt: Enable Telemetry - Figure 13: :guilabel:`Enable Telemetry` + Figure 13: :guilabel:`Enable Telemetry` Skip to finish installation =========================== After selecting values for all :guilabel:`Required options`, you may skip directly to :ref:`finish-cl-installation` -If you wish to configure network interfaces or proxy settings, -or add bundles, or add/manage users, continue to the next section. +If you wish to configure network interfaces or proxy settings, +or add bundles, or add/manage users, continue to the next section. Advanced Options **************** .. _configure-network-interfaces: -Configure Network Interfaces +Configure Network Interfaces ============================ By default, |CL| is configured to automatically detect the host network interface using DHCP. However, if you want to use a static IP address or if you do not have a DHCP server on your network, follow these instructions to manually configure the network interface. Otherwise, default network -interface settings are automatically applied. +interface settings are automatically applied. -.. note:: - - If DHCP is available, no user selection may be required. +.. note:: + + If DHCP is available, no user selection may be required. #. Navigate to :guilabel:`Configure Network Interfaces` and - select :kbd:`Enter`. + select :kbd:`Enter`. -#. Navigate to the network :guilabel:`interface` you wish to change. +#. Navigate to the network :guilabel:`interface` you wish to change. -#. When the desired :guilabel:`interface` is highlighted, select +#. When the desired :guilabel:`interface` is highlighted, select :guilabel:`Enter` to edit. - .. note:: Multiple network interfaces may appear. + .. note:: Multiple network interfaces may appear. .. figure:: figures/bare-metal-install-beta-14.png :scale: 100 % :alt: Configure Network Interfaces - Figure 14: :guilabel:`Configure Network Interfaces` + Figure 14: :guilabel:`Configure Network Interfaces` -#. Notice :guilabel:`Automatic / dhcp` is selected by default (at bottom). +#. Notice :guilabel:`Automatic / dhcp` is selected by default (at bottom). Optional: Navigate to the checkbox :guilabel:`Automatic / dhcp` and select - :kbd:`Spacebar` to deselect. + :kbd:`Spacebar` to deselect. .. figure:: figures/bare-metal-install-beta-15.png :scale: 100 % :alt: Network interface configuration - Figure 15: :guilabel:`Network interface configuration` + Figure 15: :guilabel:`Network interface configuration` #. Navigate to the appropriate fields and assign the desired - network configuration. + network configuration. -#. To save settings, navigate to :guilabel:`Confirm` and select +#. To save settings, navigate to :guilabel:`Confirm` and select :kbd:`Enter`. - .. note:: + .. note:: To revert to previous settings, navigate to the :guilabel:`Cancel` and select :kbd:`Enter`. #. Upon confirming network configuration, the :guilabel:`Testing Networking` - dialogue appears. Assure the result shows success. If a failure occurs, - your changes will not be saved. + dialogue appears. Assure the result shows success. If a failure occurs, + your changes will not be saved. #. Upon confirmation, you are returned to :guilabel:`Network interface` - settings. + settings. -#. Navigate to and select :guilabel:`Main Menu`. +#. Navigate to and select :guilabel:`Main Menu`. Optional: :ref:`Skip to finish installation `. @@ -500,27 +500,27 @@ Proxy ===== |CL| automatically attempts to detect proxy settings, as described in -`Autoproxy`_. If you need to manually assign proxy settings, follow this -instruction. +`Autoproxy`_. If you need to manually assign proxy settings, follow this +instruction. -#. From the Advanced options menu, navigate to :guilabel:`Proxy`, and +#. From the Advanced options menu, navigate to :guilabel:`Proxy`, and select :kbd:`Enter`. - -#. Navigate to the field :guilabel:`HTTPS Proxy`. - + +#. Navigate to the field :guilabel:`HTTPS Proxy`. + .. figure:: figures/bare-metal-install-beta-16.png :scale: 100 % :alt: Configure the network proxy - Figure 16: :guilabel:`Configure the network proxy` + Figure 16: :guilabel:`Configure the network proxy` #. Enter the desired proxy address and port using conventional syntax, - such as: http://address:port. + such as: http://address:port. #. Navigate to :guilabel:`Confirm` and select :kbd:`Enter`. -#. To revert to previous settings, navigate to :guilabel:`Cancel` - and select :guilabel:`Cancel`. +#. To revert to previous settings, navigate to :guilabel:`Cancel` + and select :guilabel:`Cancel`. Optional: :ref:`Skip to finish installation `. @@ -529,21 +529,21 @@ Optional: :ref:`Skip to finish installation `. Test Network Settings ===================== -To manually assure network connectivity before installing |CL|, +To manually assure network connectivity before installing |CL|, select :guilabel:`Test Network Settings` and select :guilabel:`Enter`. -A progress bar appears as shown in Figure 17. +A progress bar appears as shown in Figure 17. .. figure:: figures/bare-metal-install-beta-17.png :scale: 100 % :alt: Testing Networking dialogue - Figure 17: :guilabel:`Testing Networking dialogue` + Figure 17: :guilabel:`Testing Networking dialogue` -.. note:: - - Any changes made to network settings are automatically tested - during configuration. +.. note:: + + Any changes made to network settings are automatically tested + during configuration. Optional: :ref:`Skip to finish installation `. @@ -554,18 +554,18 @@ Bundle Selection #. Navigate to the desired bundle using :kbd:`Tab` or :kbd:`Up/Down` arrows. -#. Select :kbd:`Spacebar` to select the checkbox for each desired bundle. - +#. Select :kbd:`Spacebar` to select the checkbox for each desired bundle. + .. figure:: figures/bare-metal-install-beta-18.png :scale: 100 % :alt: Bundle selection - Figure 18: :guilabel:`Bundle selection` + Figure 18: :guilabel:`Bundle selection` #. Select :kbd:`Confirm` or :kbd:`Cancel`. - You are returned to the :guilabel:`Advanced options` menu. + You are returned to the :guilabel:`Advanced options` menu. Optional: :ref:`Skip to finish installation `. @@ -575,199 +575,198 @@ User Manager Add New User ------------ -#. In Advanced Options, select :guilabel:`User Manager`. +#. In Advanced Options, select :guilabel:`User Manager`. -#. Select :guilabel:`Add New User` as shown in Figure 19. +#. Select :guilabel:`Add New User` as shown in Figure 19. .. figure:: figures/bare-metal-install-beta-19.png :scale: 100 % - :alt: Add New User, User Name + :alt: Add New User, User Name - Figure 19: :guilabel:`Add New User` + Figure 19: :guilabel:`Add New User` - #. Optional: Enter a :guilabel:`User Name`. - .. note: + .. note: - The User Name must be alphanumeric and can include spaces, commas, or hyphens. Maximum length is 64 characters. + The User Name must be alphanumeric and can include spaces, commas, or hyphens. Maximum length is 64 characters. .. figure:: figures/bare-metal-install-beta-20.png :scale: 100 % - :alt: User Name + :alt: User Name - Figure 20: :guilabel:`User Name` + Figure 20: :guilabel:`User Name` #. Enter a :guilabel:`Login`. - .. note:: + .. note:: - The User Login must be alphanumeric and can include hyphens and underscores. Maximum length is 31 characters. + The User Login must be alphanumeric and can include hyphens and underscores. Maximum length is 31 characters. #. Enter a :guilabel:`Password`. - .. note: + .. note: Minimum length is 8 characters. Maximum length is 255 characters. -#. In :guilabel:`Retype`, enter the same password. +#. In :guilabel:`Retype`, enter the same password. -#. Optional: Navigate to the :guilabel:`Administrative` checkbox and select - :kbd:`Spacebar` to assign administrative rights to the user. +#. Optional: Navigate to the :guilabel:`Administrative` checkbox and select + :kbd:`Spacebar` to assign administrative rights to the user. - .. note:: + .. note:: - Selecting this option enables sudo privileges for the user. + Selecting this option enables sudo privileges for the user. .. figure:: figures/bare-metal-install-beta-21.png :scale: 100 % :alt: Administrative rights - Figure 21: :guilabel:`Administrative rights` - -#. Select :kbd:`Confirm`. + Figure 21: :guilabel:`Administrative rights` + +#. Select :kbd:`Confirm`. .. note:: - If desired, select :guilabel:`Reset` to reset the form. + If desired, select :guilabel:`Reset` to reset the form. Modify / Delete User -------------------- -#. In User Manager, select :guilabel:`Tab` to highlight the user, as shown - in Figure 22. +#. In User Manager, select :guilabel:`Tab` to highlight the user, as shown + in Figure 22. -#. Select :kbd:`Enter` to modify the user. +#. Select :kbd:`Enter` to modify the user. .. figure:: figures/bare-metal-install-beta-22.png :scale: 100 % :alt: Modify User - Figure 22: :guilabel:`Modify User` + Figure 22: :guilabel:`Modify User` -#. Modify user details as desired. +#. Modify user details as desired. - Optional: To delete the user, navigate to the :guilabel:`Delete` - button and select :kbd:`Enter` + Optional: To delete the user, navigate to the :guilabel:`Delete` + button and select :kbd:`Enter` + +#. Navigate to :kbd:`Confirm` until highlighted. -#. Navigate to :kbd:`Confirm` until highlighted. - .. note:: - Optional: Select :guilabel:`Reset` to rest the form. + Optional: Select :guilabel:`Reset` to rest the form. -#. Select :guilabel:`Confirm` to save the changes you made. +#. Select :guilabel:`Confirm` to save the changes you made. -You are returned to the User Manager menu. +You are returned to the User Manager menu. Optional: :ref:`Skip to finish installation `. -Kernel Command Line +Kernel Command Line =================== -For more advanced users, |CL| provides the ability to add, or remove, kernel -arguments. If you want to append a new argument, enter the argument here. -This argument will be used every time you install a new kernel or update a -new kernel. +For more advanced users, |CL| provides the ability to add, or remove, kernel +arguments. If you want to append a new argument, enter the argument here. +This argument will be used every time you install a new kernel or update a +new kernel. -#. In Advanced Options, select :guilabel:`Tab` to highlight - :guilabel:`Kernel Command Line`. +#. In Advanced Options, select :guilabel:`Tab` to highlight + :guilabel:`Kernel Command Line`. -#. Select :kbd:`Enter`. +#. Select :kbd:`Enter`. -#. To add or remove arguments, choose one of the following options. +#. To add or remove arguments, choose one of the following options. .. figure:: figures/bare-metal-install-beta-23.png :scale: 100 % :alt: kernel command line - Figure 23: :guilabel:`kernel command line` + Figure 23: :guilabel:`kernel command line` -#. To add arguments, enter the argument in :guilabel:`Add Extra Arguments`. +#. To add arguments, enter the argument in :guilabel:`Add Extra Arguments`. -#. To remove an existing argument, enter the argument in - :guilabel:`Remove Arguments`. +#. To remove an existing argument, enter the argument in + :guilabel:`Remove Arguments`. -#. Select :kbd:`Confirm`. +#. Select :kbd:`Confirm`. Optional: :ref:`Skip to finish installation `. -Kernel Selection +Kernel Selection ================ #. Select a kernel option. By default, the latest kernel release is - selected. + selected. - .. note:: + .. note:: + + To choose a different kernel, such as Long Term Support (LTS), shown in Figure 24, navigate to it using :guilabel:`Tab`. - To choose a different kernel, such as Long Term Support (LTS), shown in Figure 24, navigate to it using :guilabel:`Tab`. - .. figure:: figures/bare-metal-install-beta-24.png :scale: 100 % :alt: Kernel selection - Figure 24: :guilabel:`Kernel selection` + Figure 24: :guilabel:`Kernel selection` -#. Select :kbd:`Spacebar` to select the desired option. - -#. Select :kbd:`Confirm`. +#. Select :kbd:`Spacebar` to select the desired option. + +#. Select :kbd:`Confirm`. Optional: :ref:`Skip to finish installation `. Swupd Mirror ============ -If you have your own custom mirror of |CL|, you may want to add that URL. +If you have your own custom mirror of |CL|, you may want to add that URL. -#. In Advanced Options, select :guilabel:`Swupd Mirror`. +#. In Advanced Options, select :guilabel:`Swupd Mirror`. #. To add a local swupd mirror, enter a valid URL in :guilabel:`Mirror URL:` -#. Select :kbd:`Confirm`. +#. Select :kbd:`Confirm`. .. figure:: figures/bare-metal-install-beta-25.png :scale: 100 % :alt: Swupd Mirror - Figure 25: :guilabel:`Swupd Mirror` + Figure 25: :guilabel:`Swupd Mirror` Optional: :ref:`Skip to finish installation `. Assign Hostname =============== -#. In Advanced Options, select :guilabel:`Assign Hostname`. +#. In Advanced Options, select :guilabel:`Assign Hostname`. #. In :guilabel:`Hostname`, enter the hostname only (excluding the domain). .. note:: Hostname does not allow empty spaces. Hostname must start with an - alphanumeric character but may also contain hyphens. Maximum length of - 63 characters. + alphanumeric character but may also contain hyphens. Maximum length of + 63 characters. .. figure:: figures/bare-metal-install-beta-26.png :scale: 100 % :alt: Assign Hostname - Figure 26: :guilabel:`Assign Hostname` + Figure 26: :guilabel:`Assign Hostname` -#. Navigate to :kbd:`Confirm` until highlighted. +#. Navigate to :kbd:`Confirm` until highlighted. -#. Select :kbd:`Confirm`. +#. Select :kbd:`Confirm`. Optional: :ref:`Skip to finish installation `. Automatic OS Updates ==================== -In the rare case that you need to disable automatic software updates, +In the rare case that you need to disable automatic software updates, follow the onscreen instructions. -#. In Advanced Options, select :guilabel:`Automatic OS Updates`. +#. In Advanced Options, select :guilabel:`Automatic OS Updates`. -#. Select the desired option. +#. Select the desired option. .. figure:: figures/bare-metal-install-beta-27.png :scale: 100 % @@ -775,7 +774,7 @@ follow the onscreen instructions. Figure 27: :guilabel:`Automatic OS Updates` -You are returned to the :guilabel:`Main Menu`. +You are returned to the :guilabel:`Main Menu`. .. _finish-cl-installation: @@ -783,16 +782,16 @@ Finish installation ******************* #. When you are satisfied with your installation configuration, navigate to - :guilabel:`Install` and select :kbd:`Enter`. + :guilabel:`Install` and select :kbd:`Enter`. - .. note:: + .. note:: - Whenever installation is finished, a ``reboot`` button appears. + Whenever installation is finished, a ``reboot`` button appears. -#. Select ``reboot``. +#. Select ``reboot``. #. When the system reboots, remove any installation media present. - + **Congratulations!** You have successfully installed |CL| on bare metal using the new installer.