diff --git a/source/clear-linux/getting-started/bootable-usb.rst b/source/clear-linux/getting-started/bootable-usb.rst
deleted file mode 100644
index 6ce2a285..00000000
--- a/source/clear-linux/getting-started/bootable-usb.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-.. _bootable-usb:
-
-Creating a bootable USB to install the OS
-##########################################
-
-Here's how to create a USB drive that initiates the process for
-:ref:`clear-host`. Alternatively, you can test the
-OS by :ref:`kvm`.
-
-
-What you need
-=============
-
-* A USB stick, formatted as ``ext4``. Remember that the process of
-  flashing data to a USB completely deletes the contents of the
-  drive; as always, run ``dd`` with caution.
-* A Clear Linux* OS for Intel® Architecture image; the most current
-  release versions can be found at the following link:
-  `https://download.clearlinux.org/image <https://download.clearlinux.org/image>`_
-* Older versions can be found on our `downloads page`_.
-
-
-Download and checksum
-=====================
-
-::
-
-  $ wget https://download.clearlinux.org/image/clear-[release_number]-installer.img.xz
-  $ sha512sum clear-[release_number]-installer.img.xz
-
-
-Confirm the mount point on the USB drive
-========================================
-
-Using ``$ lsblk`` is helpful to show the block-level devices;
-a USB drive usually shows up under ``/sdb`` or ``/sdc`` (almost never
-under ``/sda``), and should indicate disk space approximately the
-size of the USB drive::
-
-	$ lsblk /dev/sdb
-	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
-	?? sdb  8:16 1 14.9G 0
-	?? sdb1 8:17 1 14.9G 0 part
-
-Make sure the drive isn't already mounted. The easiest way is with
-``umount`` or
-
-::
-
-	# df
-
-
-Flash the image to the USB
-==========================
-
-Flash the image with the following command. This may need to be done as root or with sudo::
-
-  # xzcat clear-[release_number]-installer.img.xz | dd of=/dev/sdb
-
-
-Wait for the final confirmation
-===============================
-
-This example shows ``clear-9130-installer.img.xz`` flashed to a 16GB
-USB drive mounted on ``/sdb``.
-
-.. image:: ./figures/confirmation-screen.png
-   :align: center
-   :alt: confirmation
-
-Success!  Your USB stick is now ready to boot and initiate the process for
-:ref:`clear-host`.
-
-
-
-.. _downloads page: https://download.clearlinux.org
diff --git a/source/clear-linux/getting-started/clear-host.rst b/source/clear-linux/getting-started/clear-host.rst
deleted file mode 100644
index 86c8ca76..00000000
--- a/source/clear-linux/getting-started/clear-host.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. _clear-host:
-
-Installing the OS as host
-#########################
-
-Running Clear Linux\* OS for Intel® Architecture natively on a system is
-easy with the installer image. To get started you'll need the following:
-
-* A USB stick flashed with the `installer image`_.  For instructions on how
-  to do this, see :ref:`bootable-usb`.
-* A host machine running :ref:`supported-hardware`.
-* Network access via DHCP.
-
-Installing Clear Linux OS for Intel Architecture to a target system
-===================================================================
-
-#. Configure the BIOS; this may involve changing the priority of the boot
-   device to boot from USB port first.
-#. Insert the USB device that is flashed with the
-   `installer image`_ into the target system, then reboot.
-#. The installer user interface will appear. Once all appropriate
-   configuration options have been chosen, the installer will install the OS.
-
-The entire installation should take no more than a few minutes.
-
-For feedback on installation or other topics, please feel free to write in to
-our `mailing list`_.
-
-Note: You can also try :ref:`kvm`.
-
-.. _installer image: http://download.clearlinux.org/image
-.. _mailing list: https://lists.clearlinux.org/mailman/listinfo/dev
diff --git a/source/clear-linux/getting-started/getting-started.rst b/source/clear-linux/getting-started/getting-started.rst
index 590ea51d..d84abaf7 100644
--- a/source/clear-linux/getting-started/getting-started.rst
+++ b/source/clear-linux/getting-started/getting-started.rst
@@ -1,13 +1,13 @@
 Getting started
 ###############
 
+There are a number of options available for downloading and running Clear
+Linux\* OS for Intel® Architecture. You can install |CL| under Virtual
+Machines or containers, on Bare metal, or by way of Live image.
+
 .. toctree::
    :maxdepth: 2
 
-   installation-options
-   supported-hardware
-   bootable-usb
-   clear-host
    kernels
-
-
+   supported-hardware
+   installation-options
\ No newline at end of file
diff --git a/source/clear-linux/getting-started/installation-options.rst b/source/clear-linux/getting-started/installation-options.rst
index c58adf9b..de8eb8f9 100644
--- a/source/clear-linux/getting-started/installation-options.rst
+++ b/source/clear-linux/getting-started/installation-options.rst
@@ -3,8 +3,7 @@
 Installation options
 ####################
 
-There are a number of options available for downloading and running Clear
-Linux\* OS for Intel® Architecture. You can check your system hardware
+You can check your system hardware
 capabilities against the list of
 :ref:`supported processors <supported-hardware>`; alternatively,
 download and run the `clear-linux-check-config`_ script to check the hardware