[ Upstream commit 17d8adc4cd5181c13c1041b197b76efc09eaf8a8 ]
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6929644c1e0d6108e57061d427eb966e1746351 ]
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <ravikanth.tuniki@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a032b921bdeba2274866daafc8e791edd609eb13 ]
'adi,adc-dev' is now deprecated and must not be used anymore. Hence,
also remove it from being required.
The reason why it's being deprecated is because the axi-adc CORE is now
an IIO service provider hardware (IIO backends) for consumers to make use
of. Before, the logic with 'adi,adc-dev' was the opposite (it was kind
of consumer referencing other nodes/devices) and that proved to be wrong
and to not scale.
Now, IIO consumers of this hardware are expected to reference it using the
io-backends property. Hence, the new '#io-backend-cells' is being added
so the device is easily identified as a provider.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-2-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 19fb11d7220b ("dt-bindings: adc: axi-adc: add clocks property")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fcbbf3ca038c048c942ce31bb3d3c846c87581 ]
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c63 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f6ea61b6f3e4ebbb7dff857eea6220c18cd17b ]
The original .txt bindings had the OV2680 power supply names correct,
but the transition from .txt to yaml spelled them incorrectly.
Fix the OV2680 power supply names as the original .txt bindings
as these are the names used by the OV2680 driver and in devicetree.
Fixes: 57226cd8c8 ("media: dt-bindings: ov2680: convert bindings to yaml")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8c4353685778e75e186103411e9d01a4a3f2b90 ]
The temperature output register of the Loongson-2K2000 is defined in the
chip configuration domain, which is different from the Loongson-2K1000,
so it can't be fallbacked.
We need to use two groups of registers to describe it: the first group
is the high and low temperature threshold setting register; the second
group is the temperature output register.
It is true that this fix will cause ABI corruption, but it is necessary
otherwise the Loongson-2K2000 temperature sensor will not work properly.
Fixes: 72684d99a8 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/5198999d679f1a1c3457385acb9fadfc85da1f1e.1713837379.git.zhoubinbin@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88071e31e994ee23356674e0c5461b25e2a95cdc ]
Add the missing 'thermal-sensor-cells' property which is required for
every thermal sensor as it's used when using phandles.
And add the thermal-sensor.yaml reference.
In fact, it was a careless mistake when submitting the driver that
caused it to not work properly. So the fix is necessary, although it
will result in the ABI break.
Fixes: 72684d99a8 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6d69362632271ab0af9a5fbfa3bc46a0894f1d54.1700817227.git.zhoubinbin@loongson.cn
Stable-dep-of: c8c435368577 ("dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc349b0771dccebf0fa9f5e1822ac444aef11448 ]
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6fb8c20a04be234cf1cfd4bdd8cfb8860c9d2d3b upstream.
Add dt-bindings for coe-unsupported property per tx queue. Some DWMAC
IPs support tx checksum offloading(coe) only for a few tx queues.
DW xGMAC IP can be synthesized such that it can support tx coe only
for a few initial tx queues. Also as Serge pointed out, for the DW
QoS IP tx coe can be individually configured for each tx queue. This
property is added to have sw fallback for checksum calculation if a
tx queue doesn't support tx coe.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5f185bf7c42f6ca885202fefc40fc871d08a722 ]
The DMA-related nodes RDMA/WROT in MDP3 should be changed to generic names.
In addition, fix improper space indent in example.
Fixes: 4ad7b39623 ("media: dt-binding: mediatek: add bindings for MediaTek MDP3 components")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ]
The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.
The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.
Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.
Fixes: 49be163055 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Jonathan writes:
2nd set of IIO fixes for the 6.6 cycle.
Note, given timing my expectation is these will be queued for the
6.7 merge window but they could go quicker if the 6.6 cycle ends up
being extended.
afe:
* Allow for channels with offset but no scale. In this case the scale
can be assumed to be 1.
adi,ad74115:
* Add missing dt-binding constraint on number of reset-gpios.
samsung,exynos:
* Don't request touchscreen interrupt if it is not going to be used,
getting rid of an incorrect resulting warning message.
xilinx,xadc:
* Avoid changing preset voltage and themperature thresholds as they
are typicaly set as part of FPGA image building so should be left
alone.
* Fix wrong temperature offset and scale for some devices.
* tag 'iio-fixes-for-6.6b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: afe: rescale: Accept only offset channels
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Capture correct oemid-bits for eMMC cards
- Fix error propagation for some ioctl commands
- Hold retuning if SDIO is in 1-bit mode
MMC host:
- mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
- sdhci-msm: Correct minimum number of clocks
- sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
- sdhci-sprd: Fix error code in sdhci_sprd_tuning()"
* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Capture correct oemid-bits for eMMC cards
mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
mmc: core: Fix error propagation for some ioctl commands
mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
mmc: core: sdio: hold retuning if sdio in 1-bit mode
dt-bindings: mmc: sdhci-msm: correct minimum number of clocks
Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixes and look safe for this late RC.
The majority of changes are for ASoC, especially for wcd938x driver
and Cirrus codec drivers, while there are other random fixes including
usual HD-audio quirks"
* tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ASoC: da7219: Correct the process of setting up Gnd switch in AAD
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx
ASoC: dwc: Fix non-DT instantiation
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
ASoC: rt5650: fix the wrong result of key button
ASoC: cs42l42: Fix missing include of gpio/consumer.h
ASoC: cs42l43: Update values for bias sense
ASoC: dt-bindings: cirrus,cs42l43: Update values for bias sense
ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting
ASoC: pxa: fix a memory leak in probe()
ASoC: cs35l56: Fix illegal use of init_completion()
ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors
ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
ASoC: codecs: wcd938x: fix resource leaks on bind errors
ASoC: codecs: wcd938x: fix unbind tear down order
ASoC: codecs: wcd938x: drop bogus bind error handling
...
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation and
resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver"
* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
dmaengine: stm32-dma: fix residue in case of MDMA chaining
dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
dmaengine: stm32-mdma: use Link Address Register to compute residue
dmaengine: stm32-mdma: abort resume if no ongoing transfer
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set
