Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for the 6.5 cycle.

New device support
- honeywell,mprls0025pa
  * New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
  * Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
  * Add support for mlx90615 Infra Red Thermometer after driver cleanup
    and refactoring to support the differences in this device.
- renesas,x9250
  * New driver and bindings for this quad potentiometer.
- rockchip,saradc
  * Add support for RK3588. Also included is a bunch of refactoring and
    cleanup for that driver.
- rohm,bu27008
  * New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
  * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
  * New driver and bindings for this ambient light sensor.

Features
- core
  * Introduce iio_validate_own_trigger() for cases where a driver can only
    consumer a trigger it registered (detected via same parent device).
    Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
  * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
  * Enable asynchronous probe.
- rohm,bu27034
  * Enable asynchronous probe.
- ti,tmp006
  * Explicit support for DT including binding documentation.

Cleanups, minor fixes and misc improvements.
- treewide
  * Switch I2C drivers from probe_new() back to probe() - part of the
    long process of getting rid of a parameter from probe()
  * Various whitespace and typo fixes not otherwise called out.
- core
  * industrialio-buffer,Style cleanup.
  * Add documentation to extend_name field of struct iio_chan_spec to
    direct people using it towards the label infrastructure instead.
    extend_name was a design mistake a long time back so directly people
    away from it may be useful.
- adi,ad7606
  * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
  * Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
  * Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
  * Add DT binding for this part.
- qcom,spmi-vadc
  * Allow for 1/16th prescaling used on a few devices.
  * Various changes to channel labeling and naming, including dropping
    use of fwnode_name which generates odd channel names. Small ABI
    change as a result, but not thought to be a problem for users of this
    platform.
- st,lsm6dsx
  * dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
  * Add a debug print for when legacy channel config is used.
- ti,palmas-adc
  * Drop unused i2c.h include.

* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
  dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
  dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
  iio: adc: rockchip_saradc: Use dev_err_probe
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Add callback functions
  iio: temperature: tmp006: Add OF device matching support
  dt-bindings: iio: temperature: Add support for tmp006
  staging: iio: Switch i2c drivers back to use .probe()
  iio: amplifiers: ad8366 Fix whitespace issue
  iio: imu: inv_icm42600: avoid frequent timestamp jitter
  MAINTAINERS: Add ROHM BU27008
  iio: light: ROHM BU27008 color sensor
  iio: kx022a: Use new iio_validate_own_trigger()
  iio: trigger: Add simple trigger_validation helper
  dt-bindings: iio: light: ROHM BU27008
  iio: mlx90614: Add MLX90615 support
  ...

include/linux/iio/common/st_sensors.h

@@ -22,6 +22,7 @@
 #include <linux/platform_data/st_sensors_pdata.h>
 
 #define LSM9DS0_IMU_DEV_NAME		"lsm9ds0"
+#define LSM303D_IMU_DEV_NAME		"lsm303d"
 
 /*
  * Buffer size max case: 2bytes per channel, 3 channels in total +

include/linux/iio/iio.h

@@ -221,6 +221,9 @@ struct iio_event_spec {
  * @extend_name:	Allows labeling of channel attributes with an
  *			informative name. Note this has no effect codes etc,
  *			unlike modifiers.
+ *			This field is deprecated in favour of providing
+ *			iio_info->read_label() to override the label, which
+ *			unlike @extend_name does not affect sysfs filenames.
  * @datasheet_name:	A name used in in-kernel mapping of channels. It should
  *			correspond to the first name that the channel is referred
  *			to by in the datasheet (e.g. IND), or the nearest

include/linux/iio/trigger.h

@@ -171,6 +171,7 @@ void iio_trigger_free(struct iio_trigger *trig);
  */
 bool iio_trigger_using_own(struct iio_dev *indio_dev);
 
+int iio_validate_own_trigger(struct iio_dev *idev, struct iio_trigger *trig);
 int iio_trigger_validate_own_device(struct iio_trigger *trig,
 				     struct iio_dev *indio_dev);