distro/oE2403SP4: ebs variant built from EBS repo

NOT FOR USE

Serves oE pre-releasing imaghe creation.

Dockerfile

@@ -45,21 +45,16 @@ RUN sed -i 's/deb.debian.org/mirrors.ustc.edu.cn/g' /etc/apt/sources.list.d/debi
 RUN apt-get update && apt-get install -y \
         attr \
         bsdextrautils \
-        bzip2 \
         coreutils \
         dosfstools \
         e2fsprogs \
         fdisk \
         findutils \
-        gdisk \
-        gzip \
         libsqlite3-0 \
         mtools \
-        rsync \
         tar \
         util-linux \
         uuid-runtime \
-        xz-utils \
         zstd \
         zlib1g \
         policycoreutils \

README.md

@@ -34,11 +34,79 @@ It can be interrupted at any time, without harming your host OS.
 
 ## Prerequirements
 
-- Root-mode docker with `--priviledged` option available
+- GNU Make 4 or newer
-  - May not be necessary in the future
+- `rsync`, `curl`, and `unzip` for staging recipes and downloading blobs
-- rsync
+- RISC-V user-mode emulation and binfmt registration: `qemu-riscv64-static`
-- GNU Makefile
+  and `binfmt`; registration is a one-time system setup step
-- ~~And other basic shell utils~~
+- Docker or Podman; rootless operation is supported
+
+### Dependencies
+
+The Makefile uses these host commands before a build script runs:
+
+| Command | Debian package | Fedora package | Used for |
+| --- | --- | --- | --- |
+| `make` | `make` | `make` | Makefile target management |
+| `rsync` | `rsync` | `rsync` | Recipe staging |
+| `curl` | `curl` | `curl` | Remote blob downloads |
+| `unzip` | `unzip` | `unzip` | Extracting blob archives |
+| `qemu-riscv64-static` | `qemu-user-static` | `qemu-user-static` | Running RISC-V binaries on the build host |
+| `binfmt` registration | `binfmt-support` | `systemd` (`systemd-binfmt`) | Dispatching RISC-V binaries to QEMU |
+
+The build scripts and the recipe post-processing scripts use the following
+commands. The package names are the packages to install on the build host;
+some commands are also supplied by the default base image in Docker.
+
+| Command or tool | Debian package | Fedora package | Used for |
+| --- | --- | --- | --- |
+| `setfattr` | `attr` | `attr` | Removing the SELinux attribute from `/boot` |
+| `bash` | `bash` | `bash` | Running recipe scripts |
+| `column` | `bsdextrautils` | `util-linux` | Formatting generated `fstab` |
+| `coreutils` (`basename`, `cat`, `chmod`, `cp`, `cut`, `dd`, `du`, `head`, `ln`, `mkdir`, `mktemp`, `mv`, `readlink`, `rm`, `sha256sum`, `sort`, `stat`, `tee`, `tr`, `truncate`) | `coreutils` | `coreutils` | File, stream, and image operations |
+| `dosfstools` (`mkfs.vfat`) | `dosfstools` | `dosfstools` | Creating VFAT filesystems |
+| `e2fsprogs` (`mkfs.ext4`, `tune2fs`, `e2fsck`, `resize2fs`) | `e2fsprogs` | `e2fsprogs` | Creating and shrinking ext4 filesystems |
+| `find` | `findutils` | `findutils` | Finding and copying filesystem contents |
+| `grep` | `grep` | `grep` | Validation and command detection |
+| `hexdump` | `bsdextrautils` | `util-linux` | Generating VFAT UUIDs |
+| `mcopy`, `mlabel` | `mtools` | `mtools` | Writing and labeling VFAT images |
+| `blockdev`, `mount`, `umount`, `rev`, `seq`, `uuidgen` | `fdisk`, `util-linux`, `uuid-runtime` | `util-linux` | Mounting, partitioning, iteration, and UUIDs |
+| `policycoreutils` (`setfiles`) | `policycoreutils` | `policycoreutils` | Applying SELinux labels |
+| `rpm`/`dnf` (`yum`) | `rpm`, `dnf` | `rpm`, `dnf` | Installing packages into the rootfs |
+| `sed` | `sed` | `sed` | Parsing configuration and command output |
+| `tar` | `tar` | `tar` | Rootfs archive creation and extraction |
+| `zstd` | `zstd` | `zstd` | Rootfs compression |
+| `pseudo`, `pseudodb`, `pseudolog` | Build from source | Build from source | Rootfs ownership and metadata emulation |
+| `img2simg` | Build from source | Build from source | Optional sparse-image post-processing |
+
+For CI environments that invoke the scripts directly, install the dependencies
+with Debian:
+
+```shell
+sudo apt-get update
+sudo apt-get install --no-install-recommends \
+    attr bash bsdextrautils coreutils curl dosfstools e2fsprogs fdisk findutils \
+    grep make mtools policycoreutils qemu-user-static binfmt-support rsync rpm \
+    sed tar unzip util-linux uuid-runtime zstd
+sudo update-binfmts --enable qemu-riscv64
+```
+
+The corresponding Fedora setup is:
+
+```shell
+sudo dnf install \
+    attr bash coreutils curl dosfstools e2fsprogs findutils grep make mtools \
+    policycoreutils qemu-user-static rsync rpm sed tar unzip util-linux zstd
+sudo systemctl enable --now systemd-binfmt
+```
+
+`pseudo` and `img2simg` are built in the Dockerfile and are not standard
+runtime packages on Debian or Fedora. They must also be available in `PATH`
+when scripts are invoked directly.
+
+The current Dockerfile does not need `bzip2`, `gzip`, `xz-utils`, `gdisk`, or
+`rsync`: the scripts use Zstandard only, partitioning is done by `sfdisk`, and
+recipe staging, downloading, and extraction happen on the host. `zlib1g`
+remains required by the custom `img2simg` binary.
 
 ## Usage
 
@@ -52,7 +120,7 @@ Firstly, let it build a container image for later use:
 make container
 ```
 
-It will be tagged and managed by docker.
+It will be tagged and managed by the configured container runtime.
 
 Listing all available targets:
 
@@ -78,16 +146,20 @@ Build all available BSP targets, parallelly:
 make -j$(nproc) all_bsp
 ```
 
-To invoke `build_rootfs.sh` and `build_bsp.sh` directly on the host instead of
+For CI jobs that invoke `build_rootfs.sh` and `build_bsp.sh` directly instead
-through a container, clear `CONTAINER_CMD`:
+of through a container, clear `CONTAINER_CMD`:
 
 ```shell
 make CONTAINER_CMD= openEuler-24.03-LTS-SP4-RVA23-base-OLK-generic
 ```
 
-Direct execution requires the tools used by the scripts, including `pseudo`,
+Normal builds use the configured container runtime. Set `CONTAINER_CMD=podman`
-`yum` or `dnf`, filesystem utilities, and sufficient privileges for mounting
+to use Podman instead of Docker:
-filesystems. `make container` still builds the Docker image.
+
+```shell
+make CONTAINER_CMD=podman container
+make CONTAINER_CMD=podman openEuler-24.03-LTS-SP4-RVA23-base-OLK-generic
+```
 
 > BSP target will be rebuilt each time even if no configuration is changed
 

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/device.mk

@@ -0,0 +1,3 @@
+DEVICE_NAME := OLK
+
+$(foreach profile_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)*)),$(eval $(call add_device_profile,$(profile_dir))))

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/extensions/ebs/post.d/99-restore-repo/entry.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env sh
+
+rm "${ROOTFS_DIR}/etc/yum.repos.d/bootstrap.repo"
+mv "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo.disabled" "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo"

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/image-layout.conf

@@ -0,0 +1,24 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=vfat
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/40-kenel-preq/packages.list

@@ -0,0 +1,2 @@
+dracut
+linux-firmware

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/40-kenel-preq/post.d/50-fstab/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | column -t | tee "${ROOTFS_DIR}/etc/fstab"
+UUID=$($get_fs_uuid_by_mountpoint /)	/	ext4	errors=remount-ro	0	1
+UUID=$($get_fs_uuid_by_mountpoint /boot)	/boot	vfat	defaults		0	2
+EOF

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/50-root-part-resize-service/packages.list

@@ -0,0 +1,2 @@
+gdisk
+parted

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/50-root-part-resize-service/post.d/50-setup-service/entry.sh

@@ -0,0 +1,8 @@
+#!/usr/bin/env sh
+
+mkdir -p "${ROOTFS_DIR}/etc/systemd/system"
+cp "oerv-firstboot.service" "${ROOTFS_DIR}/etc/systemd/system/oerv-firstboot.service"
+cp "oerv-firstboot.sh" "${ROOTFS_DIR}/usr/sbin/oerv-firstboot.sh"
+chmod +x "${ROOTFS_DIR}/usr/sbin/oerv-firstboot.sh"
+mkdir -p "${ROOTFS_DIR}/etc/systemd/system/multi-user.target.wants"
+ln -s "/etc/systemd/system/oerv-firstboot.service" "${ROOTFS_DIR}/etc/systemd/system/multi-user.target.wants/oerv-firstboot.service"

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/50-root-part-resize-service/post.d/50-setup-service/oerv-firstboot.service

@@ -0,0 +1,13 @@
+[Unit]
+Before=systemd-user-sessions.service
+ConditionPathExists=/etc/systemd/system/multi-user.target.wants/oerv-firstboot.service
+Requires=-.mount
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/oerv-firstboot.sh
+ExecStartPost=/usr/bin/rm /etc/systemd/system/multi-user.target.wants/oerv-firstboot.service
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/50-root-part-resize-service/post.d/50-setup-service/oerv-firstboot.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env sh
+
+echo "$0: Expanding root partition..."
+ROOT_PART="$(findmnt -no SOURCE /)"
+ROOT_PARTNUM="$(lsblk -pr -no partn "${ROOT_PART}")"
+ROOT_DISK="$(lsblk -p -no pkname "${ROOT_PART}")"
+sgdisk -e "${ROOT_DISK}"
+echo "Yes" | parted ---pretend-input-tty "${ROOT_DISK}" resizepart "${ROOT_PARTNUM}" 100%
+partprobe
+resize2fs "${ROOT_PART}"
+echo "$0: Done."

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/60-kernel/packages.list

@@ -0,0 +1,2 @@
+kernel
+kernel-headers

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/60-kernel/post.d/50-extlinux_conf/entry.sh

@@ -0,0 +1,24 @@
+#!/usr/bin/env sh
+
+. "${ROOTFS_DIR}/etc/os-release"
+
+KERNEL_FILE="$(find ${ROOTFS_DIR}/boot -name "vmlinuz*" -exec basename {} \; | head -n 1)"
+INITRD_FILE="$(find ${ROOTFS_DIR}/boot -name "initramfs*" -exec basename {} \; | head -n 1)"
+DTB_DIR="$(find ${ROOTFS_DIR}/boot -name "dtb-*" -exec basename {} \; | head -n 1)"
+
+mkdir "${ROOTFS_DIR}/boot/extlinux"
+
+cat << EOF | tee "${ROOTFS_DIR}/boot/extlinux/extlinux.conf"
+default l0
+menu title U-Boot menu
+prompt 2
+timeout 50
+
+
+label l0
+	menu label ${PRETTY_NAME} - ${KERNEL_FILE#vmlinuz-}
+	linux /${KERNEL_FILE}
+	initrd /${INITRD_FILE}
+	fdtdir /${DTB_DIR}/
+	append root=UUID=$($get_fs_uuid_by_mountpoint /) rootwait rw earlycon=sbi console=ttyS0,115200n8
+EOF

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/packages.d/60-kernel/post.d/50-fix-dtb-name/entry.sh

@@ -0,0 +1,8 @@
+#!/usr/bin/env sh
+
+DTB_DIR="$(find ${ROOTFS_DIR}/boot -name "dtb-*" -exec basename {} \; | head -n 1)"
+DTB_DIR="${ROOTFS_DIR}/boot/${DTB_DIR}"
+
+mv "${DTB_DIR}/spacemit/k1-bananapi-f3.dtb" "${DTB_DIR}/spacemit/k1-x_deb1.dtb"
+mv "${DTB_DIR}/spacemit/k3-com260.dtb" "${DTB_DIR}/spacemit/k3_com260.dtb"
+mv "${DTB_DIR}/spacemit/k3-pico.dtb" "${DTB_DIR}/spacemit/k3_pico.dtb"

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/post.d/99-selinux-xattr/entry.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env sh
+
+# Re-labelling all files except /boot which is stored in vfat
+pseudo setfiles -r "${ROOTFS_DIR}" -e "${ROOTFS_DIR}/boot" "${ROOTFS_DIR}/etc/selinux/targeted/contexts/files/file_contexts" "${ROOTFS_DIR}"
+pseudo setfattr -h -x security.selinux "${ROOTFS_DIR}/boot"

receipes/openeuler/24.03-lts-sp4-rva23/bsp/OLK/generic/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := generic

receipes/openeuler/24.03-lts-sp4-rva23/release.mk

@@ -0,0 +1,4 @@
+RELEASE_NAME := 24.03-LTS-SP4-RVA23
+
+$(foreach receipe_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)userspace/*)),$(eval $(call add_receipe,$(receipe_dir))))
+$(foreach device_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)bsp/*)),$(eval $(call add_device,$(device_dir))))

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/packages.d/00-setup-repo/packages.list

@@ -0,0 +1 @@
+openEuler-repos

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/packages.d/00-setup-repo/post.d/50-remove-bootstrap-repo/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+rm "${ROOTFS_DIR}/etc/yum.repos.d/bootstrap.repo"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/packages.d/00-setup-repo/post.d/51-change-mirror/entry.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env sh
+
+sed -i 's/metalink=/# metalink=/g' "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo"
+sed -i 's/repo.openeuler.org/mirror.iscas.ac.cn\/openeuler/g' "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/packages.d/50-base.list

@@ -0,0 +1,119 @@
+NetworkManager
+NetworkManager-wifi
+acl
+at
+attr
+audit
+authselect
+basesystem
+bash
+bash-completion
+bc
+bpftool
+bzip2
+chrony
+cifs-utils
+coreutils
+cpio
+cronie
+crontabs
+cryptsetup
+curl
+dbus
+dnf
+dnf-plugins-core
+dos2unix
+dosfstools
+e2fsprogs
+ed
+ethtool
+file
+filesystem
+firewalld
+glibc
+gnupg2
+grubby
+hostname
+ima-evm-utils
+initscripts
+iproute
+iprutils
+iptstate
+iputils
+irqbalance
+kbd
+less
+libstoragemgmt
+libteam
+logrotate
+lshw
+lsof
+lsscsi
+lvm2
+mailcap
+man-db
+man-pages
+mdadm
+mlocate
+mtr
+nano
+ncurses
+net-tools
+nfs-utils
+nmap
+openEuler-latest-release
+openEuler-release
+openssh
+openssh-clients
+openssh-server
+parted
+passwd
+pciutils
+pinfo
+plymouth
+policycoreutils
+procps-ng
+psacct
+quota
+rdma-core
+realmd
+rng-tools
+rootfiles
+rpm
+rsync
+rsyslog
+rsyslog-relp
+security-tool
+selinux-policy-mls
+selinux-policy-targeted
+setup
+sg3_utils
+shadow
+smartmontools
+strace
+sudo
+symlinks
+sysfsutils
+systemd
+systemd-udev
+tar
+tcpdump
+time
+traceroute
+tree
+tuned
+unzip
+usbutils
+util-linux
+util-linux-user
+vim-enhanced
+vim-minimal
+virt-what
+wget
+which
+words
+xfsdump
+xfsprogs
+yum
+zip
+zsh

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/post.d/50-default-user/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | chroot "${ROOTFS_DIR}" passwd root
+openEuler12#$
+openEuler12#$
+EOF

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/post.d/50-hostname/entry.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env sh
+
+echo openeuler-riscv64 >> "${ROOTFS_DIR}/etc/hostname"
+echo "127.0.0.1   openeuler-riscv64" >> "${ROOTFS_DIR}/etc/hosts"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/post.d/50-timezone/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+cat "${ROOTFS_DIR}/usr/share/zoneinfo/Asia/Shanghai" > "${ROOTFS_DIR}/etc/localtime"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/post.d/50-touch-fstab/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+touch "${ROOTFS_DIR}/etc/fstab"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/post.d/99-selinux-xattr/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+pseudo setfiles -r "${ROOTFS_DIR}" "${ROOTFS_DIR}/etc/selinux/targeted/contexts/files/file_contexts" "${ROOTFS_DIR}"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/receipe.mk

@@ -0,0 +1,2 @@
+RECEIPE_NAME := base
+COMPRESSION := zstd

receipes/openeuler/24.03-lts-sp4-rva23/userspace/base/repos.d/bootstrap.repo

@@ -0,0 +1,8 @@
+[everything]
+name=everything
+baseurl=https://repo.openeuler.org/openEuler-24.03-LTS-SP4/everything/riscv64/rva23/$basearch/
+metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/everything/riscv64/rva23&arch=$basearch
+metadata_expire=1h
+enabled=1
+gpgcheck=1
+gpgkey=http://repo.openeuler.org/openEuler-24.03-LTS-SP4/everything/riscv64/rva23/$basearch/RPM-GPG-KEY-openEuler

receipes/openeuler/24.03-lts-sp4-rva23/userspace/ebs/packages.d/00-setup-repo/post.d/50-remove-bootstrap-repo/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+true

receipes/openeuler/24.03-lts-sp4-rva23/userspace/ebs/packages.d/00-setup-repo/post.d/51-change-mirror/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+true

receipes/openeuler/24.03-lts-sp4-rva23/userspace/ebs/packages.d/00-setup-repo/post.d/52-use-ebs/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+mv "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo" "${ROOTFS_DIR}/etc/yum.repos.d/openEuler.repo.disabled"

receipes/openeuler/24.03-lts-sp4-rva23/userspace/ebs/receipe.mk

@@ -0,0 +1,3 @@
+RECEIPE_NAME := ebs
+COMPRESSION := zstd
+EXTENDS := base

receipes/openeuler/24.03-lts-sp4-rva23/userspace/ebs/repos.d/bootstrap.repo

@@ -0,0 +1,5 @@
+[everything]
+name=everything
+baseurl=https://repo.tarsier-infra.isrc.ac.cn/openEuler-RISC-V/ebs/24.03SP4-RVA23/ebs-upstream-everything/riscv64/
+enabled=1
+gpgcheck=0

receipes/openruyi/creek/bsp/ork/4kn/image-layout.conf

@@ -0,0 +1,25 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+DISK_SECTOR_SIZE=4096
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=vfat
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/creek/bsp/ork/4kn/packages.d

@@ -0,0 +1 @@
+../generic/packages.d

receipes/openruyi/creek/bsp/ork/4kn/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := 4kn

receipes/openruyi/creek/bsp/ork/device.mk

@@ -0,0 +1,3 @@
+DEVICE_NAME := ORK
+
+$(foreach profile_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)*)),$(eval $(call add_device_profile,$(profile_dir))))

receipes/openruyi/creek/bsp/ork/generic/image-layout.conf

@@ -0,0 +1,24 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=vfat
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/creek/bsp/ork/generic/packages.d/40-kenel-preq/packages.list

@@ -0,0 +1,3 @@
+dracut
+u-boot-menu-ng
+kernel-install-u-boot-menu-ng

receipes/openruyi/creek/bsp/ork/generic/packages.d/40-kenel-preq/post.d/50-fstab/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | column -t | tee "${ROOTFS_DIR}/etc/fstab"
+UUID=$($get_fs_uuid_by_mountpoint /)	/	ext4	errors=remount-ro	0	1
+UUID=$($get_fs_uuid_by_mountpoint /boot)	/boot	vfat	defaults		0	2
+EOF

receipes/openruyi/creek/bsp/ork/generic/packages.d/40-kenel-preq/post.d/50-kernel-install/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+mkdir -p ${ROOTFS_DIR}/etc/kernel
+cat << EOF > ${ROOTFS_DIR}/etc/kernel/install.conf
+layout=u-boot
+EOF

receipes/openruyi/creek/bsp/ork/generic/packages.d/40-kenel-preq/post.d/50-u-boot-menu/entry.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env sh
+
+cat << EOF | tee "${ROOTFS_DIR}/etc/default/u-boot"
+U_BOOT_CONFIG_PATH='/boot/extlinux/extlinux.conf'
+U_BOOT_SEARCH_METHOD='bootdir'
+U_BOOT_TARGETS='default rescue'
+U_BOOT_ENTRY_KERNEL='/vmlinuz-\${KERNEL_VERSION}'
+U_BOOT_ENTRY_BOOT_ARGS='root=UUID=$($get_fs_uuid_by_mountpoint /) rootwait rw earlycon'
+U_BOOT_ENTRY_INITRD='/initramfs-\${KERNEL_VERSION}.img'
+U_BOOT_ENTRY_FDT_DIR='/dtb-\${KERNEL_VERSION}'
+EOF

receipes/openruyi/creek/bsp/ork/generic/packages.d/60-kernel/packages.list

@@ -0,0 +1 @@
+linux

receipes/openruyi/creek/bsp/ork/generic/packages.d/90-growdisk/packages.list

@@ -0,0 +1 @@
+systemd-repart

receipes/openruyi/creek/bsp/ork/generic/packages.d/90-growdisk/post.d/50-systemd-repart/entry.sh

@@ -0,0 +1,15 @@
+#!/usr/bin/env sh
+
+mkdir -p "${ROOTFS_DIR}/usr/lib/repart.d"
+cat << EOF > "${ROOTFS_DIR}/usr/lib/repart.d/10-grow-root.conf"
+[Partition]
+Type=root
+GrowFileSystem=yes
+EOF
+
+# Ensure only touch the disk on the firstboot
+mkdir -p "${ROOTFS_DIR}/etc/systemd/system/systemd-repart.service.d"
+cat > "${ROOTFS_DIR}/etc/systemd/system/systemd-repart.service.d/override.conf" << 'EOF'
+[Unit]
+ConditionFirstBoot=yes
+EOF

receipes/openruyi/creek/bsp/ork/generic/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := generic

receipes/openruyi/creek/bsp/spacemit-k3/4kn/image-layout.conf

@@ -0,0 +1,25 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+DISK_SECTOR_SIZE=4096
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=vfat
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/creek/bsp/spacemit-k3/4kn/packages.d

@@ -0,0 +1 @@
+../generic/packages.d

receipes/openruyi/creek/bsp/spacemit-k3/4kn/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := 4kn

receipes/openruyi/creek/bsp/spacemit-k3/4kn/repos.d

@@ -0,0 +1 @@
+../generic/repos.d

receipes/openruyi/creek/bsp/spacemit-k3/device.mk

@@ -0,0 +1,3 @@
+DEVICE_NAME := SpacemiT-K3
+
+$(foreach profile_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)*)),$(eval $(call add_device_profile,$(profile_dir))))

receipes/openruyi/creek/bsp/spacemit-k3/generic/image-layout.conf

@@ -0,0 +1,24 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=vfat
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/40-kenel-preq/packages.list

@@ -0,0 +1,3 @@
+dracut
+u-boot-menu-ng
+kernel-install-u-boot-menu-ng

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/40-kenel-preq/post.d/50-fstab/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | column -t | tee "${ROOTFS_DIR}/etc/fstab"
+UUID=$($get_fs_uuid_by_mountpoint /)	/	ext4	errors=remount-ro	0	1
+UUID=$($get_fs_uuid_by_mountpoint /boot)	/boot	vfat	defaults		0	2
+EOF

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/40-kenel-preq/post.d/50-kernel-install/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+mkdir -p ${ROOTFS_DIR}/etc/kernel
+cat << EOF > ${ROOTFS_DIR}/etc/kernel/install.conf
+layout=u-boot
+EOF

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/40-kenel-preq/post.d/50-u-boot-menu/entry.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env sh
+
+cat << EOF | tee "${ROOTFS_DIR}/etc/default/u-boot"
+U_BOOT_CONFIG_PATH='/boot/extlinux/extlinux.conf'
+U_BOOT_SEARCH_METHOD='bootdir'
+U_BOOT_TARGETS='default rescue'
+U_BOOT_ENTRY_KERNEL='/vmlinuz-\${KERNEL_VERSION}'
+U_BOOT_ENTRY_BOOT_ARGS='root=UUID=$($get_fs_uuid_by_mountpoint /) rootwait rw earlycon=sbi console=tty0 console=ttyS0,115200'
+U_BOOT_ENTRY_INITRD='/initramfs-\${KERNEL_VERSION}.img'
+U_BOOT_ENTRY_FDT_DIR='/dtb-\${KERNEL_VERSION}'
+EOF

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/60-kernel/packages.list

@@ -0,0 +1 @@
+linux-spacemit-k3-vendor-6.18

receipes/openruyi/creek/bsp/spacemit-k3/generic/packages.d/90-growdisk

@@ -0,0 +1 @@
+../../../ork/generic/packages.d/90-growdisk

receipes/openruyi/creek/bsp/spacemit-k3/generic/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := generic

receipes/openruyi/creek/bsp/spacemit-k3/generic/repos.d/bsp.repo

@@ -0,0 +1,6 @@
+[bsp_spacemit_k3]
+name=K3 BSP
+type=rpm-md
+baseurl=https://repo.build.openruyi.cn/openruyi:/bsp:/spacemit:/k3/rva23/
+enabled=1
+gpgcheck=0

receipes/openruyi/creek/release.mk

@@ -0,0 +1,4 @@
+RELEASE_NAME := Creek
+
+$(foreach receipe_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)userspace/*)),$(eval $(call add_receipe,$(receipe_dir))))
+$(foreach device_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)bsp/*)),$(eval $(call add_device,$(device_dir))))

receipes/openruyi/creek/userspace/base/packages.d/00-setup-repo/packages.list

@@ -0,0 +1 @@
+openruyi-repos

receipes/openruyi/creek/userspace/base/packages.d/00-setup-repo/post.d/50-remove-bootstrap-repo/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+rm "${ROOTFS_DIR}/etc/yum.repos.d/bootstrap.repo"

receipes/openruyi/creek/userspace/base/packages.d/50-base/packages.list

@@ -0,0 +1,11 @@
+openruyi-minimal
+systemd-udev
+systemd
+NetworkManager
+systemd-timesyncd
+systemd-resolved
+openssh-server
+bash
+bash-completion
+
+openruyi-systemd-default-preset

receipes/openruyi/creek/userspace/base/packages.d/50-base/post.d/50-enable-services/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+systemctl --root="${ROOTFS_DIR}" preset-all

receipes/openruyi/creek/userspace/base/post.d/50-default-user/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | chroot "${ROOTFS_DIR}" passwd root
+openruyi
+openruyi
+EOF

receipes/openruyi/creek/userspace/base/post.d/50-hostname/entry.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env sh
+
+echo openruyi >> "${ROOTFS_DIR}/etc/hostname"
+echo "127.0.0.1   openruyi" >> "${ROOTFS_DIR}/etc/hosts"

receipes/openruyi/creek/userspace/base/post.d/50-timezone/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+cat "${ROOTFS_DIR}/usr/share/zoneinfo/Asia/Shanghai" > "${ROOTFS_DIR}/etc/localtime"

receipes/openruyi/creek/userspace/base/post.d/50-touch-fstab/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+touch "${ROOTFS_DIR}/etc/fstab"

receipes/openruyi/creek/userspace/base/post.d/99-systemd-cleanup/entry.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env sh
+
+# https://systemd.io/BUILDING_IMAGES/
+rm -f "${ROOTFS_DIR}/etc/machine-id"
+rm -f "${ROOTFS_DIR}/var/lib/systemd/random-seed"
+rm -f "${ROOTFS_DIR}/var/lib/systemd/credential.secret"
+

receipes/openruyi/creek/userspace/base/receipe.mk

@@ -0,0 +1,2 @@
+RECEIPE_NAME := base
+COMPRESSION := zstd

receipes/openruyi/creek/userspace/base/repos.d/bootstrap.repo

@@ -0,0 +1,6 @@
+[openruyi]
+name=openruyi bootstrap
+type=rpm-md
+baseurl=https://boat.openruyi.cn/stable/rva23/
+enabled=1
+gpgcheck=0

receipes/openruyi/distro.mk

@@ -0,0 +1,4 @@
+DISTRO_NAME := openRuyi
+PACKAGE_MANAGER := yum
+
+$(foreach rel_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)*)),$(eval $(call add_distro_release,$(rel_dir))))

receipes/openruyi/unstable-mycto/bsp/mycto/bls/image-layout.conf

@@ -0,0 +1,24 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=ext4
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/unstable-mycto/bsp/mycto/bls/packages.d/40-kenel-preq/packages.list

@@ -0,0 +1 @@
+dracut

receipes/openruyi/unstable-mycto/bsp/mycto/bls/packages.d/40-kenel-preq/post.d/50-fstab/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | column -t | tee "${ROOTFS_DIR}/etc/fstab"
+UUID=$($get_fs_uuid_by_mountpoint /)	/	ext4	errors=remount-ro	0	1
+UUID=$($get_fs_uuid_by_mountpoint /boot)	/boot	ext4	defaults		0	2
+EOF

receipes/openruyi/unstable-mycto/bsp/mycto/bls/packages.d/40-kenel-preq/post.d/50-kernel-install/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+mkdir -p ${ROOTFS_DIR}/etc/kernel
+cat << EOF > ${ROOTFS_DIR}/etc/kernel/install.conf
+layout=bls
+EOF

receipes/openruyi/unstable-mycto/bsp/mycto/bls/packages.d/60-kernel/packages.list

@@ -0,0 +1 @@
+linux

receipes/openruyi/unstable-mycto/bsp/mycto/bls/packages.d/90-growdisk

@@ -0,0 +1 @@
+../../../../../creek/bsp/ork/generic/packages.d/90-growdisk

receipes/openruyi/unstable-mycto/bsp/mycto/bls/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := bls

receipes/openruyi/unstable-mycto/bsp/mycto/bls/repos.d/bsp.repo

@@ -0,0 +1,6 @@
+[ubootmenu]
+name=temp
+type=rpm-md
+baseurl=https://repo.build.openruyi.cn/openruyi:/ports:/mycto:/hack/mycto/
+enabled=1
+gpgcheck=0

receipes/openruyi/unstable-mycto/bsp/mycto/device.mk

@@ -0,0 +1,3 @@
+DEVICE_NAME := MYCTO
+
+$(foreach profile_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)*)),$(eval $(call add_device_profile,$(profile_dir))))

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/image-layout.conf

@@ -0,0 +1,24 @@
+OUTPUT_FORMAT=partitioned_disk
+PARTITION_TABLE_TYPE=GUID
+
+PARTITION_1_OFFSET=1MB
+PARTITION_1_SIZE=499M
+PARTITION_1_NAME="boot"
+PARTITION_1_UUID=
+PARTITION_1_TYPE=bls_boot
+PARTITION_1_ATTRS=legacy_boot
+PARTITION_1_USAGE=MOUNTPOINT
+PARTITION_1_MOUNTPOINT="/boot"
+PARTITION_1_FS=ext4
+PARTITION_1_FS_UUID=
+
+PARTITION_2_OFFSET=
+PARTITION_2_SIZE=
+PARTITION_2_NAME="root"
+PARTITION_2_UUID=
+PARTITION_2_TYPE=linux_root_riscv64
+PARTITION_2_ATTRS=
+PARTITION_2_USAGE=MOUNTPOINT
+PARTITION_2_MOUNTPOINT="/"
+PARTITION_2_FS=ext4
+PARTITION_2_FS_UUID=

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/40-kenel-preq/packages.list

@@ -0,0 +1,3 @@
+dracut
+u-boot-menu-ng
+kernel-install-u-boot-menu-ng

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/40-kenel-preq/post.d/50-fstab/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+cat << EOF | column -t | tee "${ROOTFS_DIR}/etc/fstab"
+UUID=$($get_fs_uuid_by_mountpoint /)	/	ext4	errors=remount-ro	0	1
+UUID=$($get_fs_uuid_by_mountpoint /boot)	/boot	ext4	defaults		0	2
+EOF

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/40-kenel-preq/post.d/50-kernel-install/entry.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+mkdir -p ${ROOTFS_DIR}/etc/kernel
+cat << EOF > ${ROOTFS_DIR}/etc/kernel/install.conf
+layout=u-boot
+EOF

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/40-kenel-preq/post.d/50-u-boot-menu/entry.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env sh
+
+cat << EOF | tee "${ROOTFS_DIR}/etc/default/u-boot"
+U_BOOT_CONFIG_PATH='/boot/extlinux/extlinux.conf'
+U_BOOT_SEARCH_METHOD='bootdir'
+U_BOOT_TARGETS='default rescue'
+U_BOOT_ENTRY_KERNEL='/vmlinuz-\${KERNEL_VERSION}'
+U_BOOT_ENTRY_BOOT_ARGS='root=UUID=$($get_fs_uuid_by_mountpoint /) rootwait rw earlycon=sbi'
+U_BOOT_ENTRY_INITRD=''
+EOF

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/60-kernel/packages.list

@@ -0,0 +1 @@
+linux

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/packages.d/90-growdisk

@@ -0,0 +1 @@
+../../../../../creek/bsp/ork/generic/packages.d/90-growdisk

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/profile.mk

@@ -0,0 +1 @@
+PROFILE_NAME := extlinux

receipes/openruyi/unstable-mycto/bsp/mycto/extlinux/repos.d/bsp.repo

@@ -0,0 +1,6 @@
+[ubootmenu]
+name=temp
+type=rpm-md
+baseurl=https://repo.build.openruyi.cn/openruyi:/ports:/mycto:/hack/mycto/
+enabled=1
+gpgcheck=0

receipes/openruyi/unstable-mycto/release.mk

@@ -0,0 +1,4 @@
+RELEASE_NAME := Unstable-MYCTO
+
+$(foreach receipe_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)userspace/*)),$(eval $(call add_receipe,$(receipe_dir))))
+$(foreach device_dir,$(filter-out %.mk,$(wildcard $(CURRENT_DIR)bsp/*)),$(eval $(call add_device,$(device_dir))))

receipes/openruyi/unstable-mycto/userspace/base/packages.d/00-setup-repo/packages.list

@@ -0,0 +1 @@
+openruyi-repos

receipes/openruyi/unstable-mycto/userspace/base/packages.d/00-setup-repo/post.d/50-remove-bootstrap-repo/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+rm "${ROOTFS_DIR}/etc/yum.repos.d/bootstrap.repo"

receipes/openruyi/unstable-mycto/userspace/base/packages.d/00-setup-repo/post.d/50-use-port/entry.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+sed -i 's#https://repo.build.openruyi.cn/openruyi/rva20/#baseurl=https://repo.build.openruyi.cn/openruyi:/ports:/mycto/mycto/#' "${ROOTFS_DIR}/etc/yum.repos.d/openruyi.repo"

receipes/openruyi/unstable-mycto/userspace/base/packages.d/50-base

@@ -0,0 +1 @@
+../../../../creek/userspace/base/packages.d/50-base

receipes/openruyi/unstable-mycto/userspace/base/post.d

@@ -0,0 +1 @@
+../../../creek/userspace/base/post.d

receipes/openruyi/unstable-mycto/userspace/base/receipe.mk

@@ -0,0 +1,2 @@
+RECEIPE_NAME := base
+COMPRESSION := zstd

receipes/openruyi/unstable-mycto/userspace/base/repos.d/bootstrap.repo

@@ -0,0 +1,6 @@
+[openruyi]
+name=openruyi bootstrap
+type=rpm-md
+baseurl=https://repo.build.openruyi.cn/openruyi:/ports:/mycto/mycto/
+enabled=1
+gpgcheck=0

receipes/openruyi/unstable-rva20/bsp/ork

@@ -0,0 +1 @@
+../../creek/bsp/ork