forked from OERV-BSP/u-boot
ff0b7d741d
Qualcomm changes for v2025.07: CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653 There's been a surprising amount of activity lately on the Qualcomm side with the two oldest boards getting some fresh attention and a lot of cleanup and polish going on across the board. * SDM660 gets USB phy fixes and a pinctrl driver * The recently added SA8775P/QCS9100 SoC gets a pinctrl driver * The Qualcomm pinctrl driver now handles reserved pins correctly, fixing crashes on some boards when running "gpio status -a" * OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig * SDM845 and SC7280 get missing clocks added (since we're now stricter about those). This gets USB working more reliably in more cases. * DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is enabled too * A bug in the livetree fixup code is fixed (making USB work on a lot more platforms) * Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a "persistent" boot menu that allows dropping to U-Boot shell later on * A new qcom-phone.config fragment is added along with a phone-specific default environment and phone-specific debugging/bringup docs. These make U-Boot more usable on devices without a serial port or keyboard. * The db820c gets fixed up and updated documentation * The db410c also gets some love and modernisation as well as a new reviewer. * A new driver is added for the USB VBUS regulator found on various Qualcomm PMICs * The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and v7 support.
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.