forked from OERV-BSP/u-boot
432e518ba7
Now that eMMC is working properly on H616 devices, it became apparent that some boards were missing the right defconfig bits to enable eMMC access. Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig, also the eMMC boot option to the TX1. Oddly enough the X96 Mate had just this bit already. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
28 lines
784 B
Plaintext
28 lines
784 B
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h313-tanix-tx1"
|
|
CONFIG_SPL=y
|
|
CONFIG_DRAM_SUNXI_DX_ODT=0x06060606
|
|
CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d
|
|
CONFIG_DRAM_SUNXI_CA_DRI=0x1919
|
|
CONFIG_DRAM_SUNXI_ODT_EN=0x9988eeee
|
|
CONFIG_DRAM_SUNXI_TPR6=0x2fb08080
|
|
CONFIG_DRAM_SUNXI_TPR10=0x402f4469
|
|
CONFIG_DRAM_SUNXI_TPR11=0x0e0f0d0d
|
|
CONFIG_DRAM_SUNXI_TPR12=0x11131213
|
|
CONFIG_MACH_SUN50I_H616=y
|
|
CONFIG_SUNXI_DRAM_H616_LPDDR3=y
|
|
CONFIG_R_I2C_ENABLE=y
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_SYS_I2C_SLAVE=0x7f
|
|
CONFIG_SYS_I2C_SPEED=400000
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_AXP313_POWER=y
|
|
CONFIG_AXP_DCDC3_VOLT=1200
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OHCI_HCD=y
|