forked from OERV-BSP/u-boot
19585f3da6
Enable support for environment in eMMC on STM32MP13xx DHCOR SoM, in addition to existing support for environment in SPI NOR. The environment size is the same, except in case the environment is placed in eMMC, it is stored at the end of eMMC BOOT partitions in the last 32 sectors of each eMMC HW BOOT partition. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
51 lines
1.2 KiB
Plaintext
51 lines
1.2 KiB
Plaintext
#include <configs/stm32mp_dhsom.config>
|
|
|
|
CONFIG_ARM=y
|
|
CONFIG_ARCH_STM32MP=y
|
|
CONFIG_TFABOOT=y
|
|
CONFIG_SYS_MALLOC_F_LEN=0x1c0000
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
|
|
CONFIG_ENV_OFFSET=0x3E0000
|
|
CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp135f-dhcor-dhsbc"
|
|
CONFIG_STM32MP13X=y
|
|
CONFIG_DDR_CACHEABLE_SIZE=0x8000000
|
|
CONFIG_TARGET_ST_STM32MP13X=y
|
|
CONFIG_ENV_OFFSET_REDUND=0x3F0000
|
|
CONFIG_STM32MP15_PWR=y
|
|
# CONFIG_ARMV7_NONSEC is not set
|
|
CONFIG_SYS_MEMTEST_START=0xc0000000
|
|
CONFIG_SYS_MEMTEST_END=0xc4000000
|
|
CONFIG_BOOTSTAGE_RECORD_COUNT=100
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
|
CONFIG_CMD_ASKENV=y
|
|
CONFIG_CMD_ERASEENV=y
|
|
CONFIG_CMD_LSBLK=y
|
|
CONFIG_CMD_CAT=y
|
|
CONFIG_CMD_SETEXPR_FMT=y
|
|
CONFIG_CMD_XXD=y
|
|
CONFIG_CMD_RNG=y
|
|
CONFIG_CMD_LOG=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_ENV_IS_NOWHERE=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_ENV_MMC_USE_DT=y
|
|
CONFIG_ENV_SPI_MAX_HZ=50000000
|
|
CONFIG_CLK_SCMI=y
|
|
CONFIG_SET_DFU_ALT_INFO=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
|
|
CONFIG_SYS_MMC_ENV_DEV=0
|
|
CONFIG_SYS_MMC_ENV_PART=1
|
|
CONFIG_PHY_REALTEK=y
|
|
CONFIG_DM_REGULATOR_SCMI=y
|
|
CONFIG_RESET_SCMI=y
|
|
CONFIG_DM_RNG=y
|
|
CONFIG_RNG_STM32=y
|
|
CONFIG_SYSRESET_PSCI=y
|
|
CONFIG_TEE=y
|
|
CONFIG_OPTEE=y
|
|
# CONFIG_OPTEE_TA_AVB is not set
|
|
CONFIG_USB_ONBOARD_HUB=y
|
|
CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2000
|
|
CONFIG_ERRNO_STR=y
|