forked from OERV-BSP/u-boot
b8c43968b8
This adds initial support for the Toradex Verdin AM62P module. The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a Gigabit Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module. These specific changes adds support for Toradex Verdin AM62P Quad 2GB WB IT module. Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com> Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.