ArmSoM-Sige5 adopts the second-generation 8nm high-performance AIOT
platform Rockchip RK3576, with a 6 TOPS computing power NPU and support
for up to 16GB of large memory. It supports 4K video encoding and
decoding, offers rich interfaces including dual gigabit Ethernet ports,
WiFi 6 & BT5, and various video outputs.
Features tested on a ArmSoM Sige5 v1.1:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe NVMe
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This patch series adds support for ZFS listing and load to u-boot.
To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS
Steps to test:
1. After applying the patch, zfs specific commands can be seen
in the boot loader prompt using
UBOOT #help
zfsload- load binary file from a ZFS file system
zfsls - list files in a directory (default /)
2. To list the files in zfs pool, device or partition, execute
zfsls <interface> <dev[:part]> [POOL/@/dir/file]
For example:
UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
3. To read and load a file from an ZFS formatted partition to RAM, execute
zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
For example:
UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
References :
-- ZFS GRUB sources from Solaris GRUB-0.97
-- GRUB Bazaar repository
Jorgen Lundman <lundman at lundman.net> 2012.
ae2faeae67