forked from OERV-BSP/u-boot
70a4d1fa1d
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
79 lines
1.9 KiB
Plaintext
79 lines
1.9 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SYS_BOARD="odroid-go-ultra"
|
|
CONFIG_ARCH_MESON=y
|
|
CONFIG_TEXT_BASE=0x01000000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-go-ultra"
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_MESON_G12A=y
|
|
CONFIG_SYS_LOAD_ADDR=0x1000000
|
|
CONFIG_DEBUG_UART_BASE=0xff803000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_IDENT_STRING=" odroid-go-ultra"
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_REMAKE_ELF=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_SIGNATURE=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_LEGACY_IMAGE_FORMAT=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
# CONFIG_BOARD_INIT is not set
|
|
CONFIG_SYS_MAXARGS=32
|
|
# CONFIG_CMD_BDI is not set
|
|
# CONFIG_CMD_IMI is not set
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_GPIO=y
|
|
# CONFIG_CMD_LOADS is not set
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ADC=y
|
|
CONFIG_SARADC_MESON=y
|
|
CONFIG_BUTTON=y
|
|
CONFIG_BUTTON_ADC=y
|
|
CONFIG_BUTTON_GPIO=y
|
|
CONFIG_DFU_RAM=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_MESON=y
|
|
CONFIG_MMC_MESON_GX=y
|
|
CONFIG_MESON_G12A_USB_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_MESON_G12A=y
|
|
CONFIG_POWER_DOMAIN=y
|
|
CONFIG_MESON_EE_POWER_DOMAIN=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
CONFIG_DEBUG_UART_SKIP_INIT=y
|
|
CONFIG_MESON_SERIAL=y
|
|
CONFIG_SYSINFO=y
|
|
CONFIG_SYSINFO_SMBIOS=y
|
|
CONFIG_USB=y
|
|
CONFIG_DM_USB_GADGET=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_DWC3=y
|
|
# CONFIG_USB_DWC3_GADGET is not set
|
|
CONFIG_USB_DWC3_MESON_G12A=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|