forked from OERV-BSP/u-boot
bf9636ef36
NetCube Systems Kumquat is a board based on the Allwinner V3s SoC, including: - 64MB DDR2 included in SoC - 10/100 Mbps Ethernet - USB-C DRD - Audio Codec - Isolated CAN-FD - ESP32 over SDIO - 8MB SPI-NOR Flash for bootloader - I2C EEPROM for MAC addresses - SDIO Connector for eMMC or SD-Card - 8x 12/24V IOs, 4x normally open relays - DS3232 RTC with Battery Backup - QWIIC connectors for external I2C devices Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_SF_DEFAULT_SPEED=40000000
|
|
CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun8i-v3s-netcube-kumquat"
|
|
CONFIG_SPL=y
|
|
CONFIG_MACH_SUN8I_V3S=y
|
|
CONFIG_SPL_SPI_SUNXI=y
|
|
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
|
|
# CONFIG_TIMESTAMP is not set
|
|
CONFIG_BOOTDELAY=1
|
|
CONFIG_PREBOOT=""
|
|
# CONFIG_SYS_DEVICE_NULLDEV is not set
|
|
CONFIG_SPL_MTD=y
|
|
CONFIG_SYS_PROMPT="Kumquat> "
|
|
CONFIG_CMD_EEPROM=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_MTDIDS_DEFAULT="nor0=firmware"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=firmware:960k(u-boot)ro,64k(u-boot-env),-(user)"
|
|
CONFIG_CMD_DIAG=y
|
|
# CONFIG_ENV_IS_IN_FAT is not set
|
|
CONFIG_ENV_SPI_MAX_HZ=1000000
|
|
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
CONFIG_USE_HOSTNAME=y
|
|
CONFIG_HOSTNAME="kumquat"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
# CONFIG_USB_FUNCTION_FASTBOOT is not set
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_MISC=y
|
|
CONFIG_NVMEM=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
|
|
CONFIG_MTD=y
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
CONFIG_SPI_FLASH_MTD=y
|
|
CONFIG_SUN8I_EMAC=y
|
|
CONFIG_PHY_SUN4I_USB=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_DS3232=y
|
|
CONFIG_SPI=y
|
|
CONFIG_USB_MUSB_HOST=y
|
|
CONFIG_USB_MUSB_GADGET=y
|
|
# CONFIG_USB_ETHER is not set
|