forked from OERV-BSP/u-boot
b7d70fe68b
CONFIG_NR_DRAM_BANKS defines the number of DRAM banks on the device. The default value of NR_DRAM_BANKS for ARCH_K3 is set to 2 (arch/arm/mach-k3/Kconfig:199) but should be 1 for am62x platforms. This patch updates NR_DRAM_BANKS value for all am62x platforms to 1. Fixes:2969ed31b8("configs: Add am62x_beagleplay_*_defconfig") Fixes:2d257d9279("configs: Add configs for AM62x SK") Fixes:085cd6459d("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM") Fixes:7d1a10659f("board: toradex: add verdin am62 support") Signed-off-by: Anshul Dalal <anshuld@ti.com>
117 lines
3.0 KiB
Plaintext
117 lines
3.0 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_K3=y
|
|
CONFIG_SYS_MALLOC_LEN=0x08000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x9000
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SOC_K3_AM625=y
|
|
CONFIG_TARGET_VERDIN_AM62_R5=y
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43c3a7f0
|
|
CONFIG_ENV_SIZE=0x20000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="k3-am625-verdin-r5"
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL_DRIVERS_MISC=y
|
|
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
|
CONFIG_SPL_SYS_MALLOC_F_LEN=0x7000
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x43c3b000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x3000
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_SIZE_LIMIT=0x3A7F0
|
|
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
|
|
CONFIG_SPL_LIBDISK_SUPPORT=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
|
|
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
|
|
CONFIG_SPL_MAX_SIZE=0x3B000
|
|
CONFIG_SPL_PAD_TO=0x0
|
|
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_SEPARATE_BSS=y
|
|
CONFIG_SPL_SYS_MALLOC=y
|
|
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
|
|
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
|
|
CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
|
|
CONFIG_SPL_EARLY_BSS=y
|
|
CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
|
|
CONFIG_SPL_ENV_SUPPORT=y
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_DM_MAILBOX=y
|
|
CONFIG_SPL_DM_RESET=y
|
|
CONFIG_SPL_POWER_DOMAIN=y
|
|
CONFIG_SPL_RAM_DEVICE=y
|
|
CONFIG_CMD_DFU=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_SPL_MULTI_DTB_FIT=y
|
|
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
|
|
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_SPL_SYSCON=y
|
|
CONFIG_SPL_OF_TRANSLATE=y
|
|
CONFIG_CLK=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_SPL_CLK_CCF=y
|
|
CONFIG_SPL_CLK_K3_PLL=y
|
|
CONFIG_SPL_CLK_K3=y
|
|
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
|
|
CONFIG_TI_SCI_PROTOCOL=y
|
|
CONFIG_DA8XX_GPIO=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_OMAP24XX=y
|
|
CONFIG_DM_MAILBOX=y
|
|
CONFIG_K3_SEC_PROXY=y
|
|
CONFIG_MISC=y
|
|
CONFIG_ESM_K3=y
|
|
CONFIG_SPL_MMC_HS200_SUPPORT=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_ADMA=y
|
|
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
|
CONFIG_MMC_SDHCI_AM654=y
|
|
CONFIG_PINCTRL=y
|
|
# CONFIG_PINCTRL_GENERIC is not set
|
|
CONFIG_SPL_PINCTRL=y
|
|
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
|
CONFIG_PINCTRL_SINGLE=y
|
|
CONFIG_POWER_DOMAIN=y
|
|
CONFIG_TI_POWER_DOMAIN=y
|
|
CONFIG_K3_SYSTEM_CONTROLLER=y
|
|
CONFIG_RESET_TI_SCI=y
|
|
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_SOC_DEVICE=y
|
|
CONFIG_SOC_DEVICE_TI_K3=y
|
|
CONFIG_SOC_TI=y
|
|
CONFIG_TIMER=y
|
|
CONFIG_SPL_TIMER=y
|
|
CONFIG_OMAP_TIMER=y
|
|
CONFIG_USB=y
|
|
CONFIG_DM_USB_GADGET=y
|
|
CONFIG_SPL_DM_USB_GADGET=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GENERIC=y
|
|
CONFIG_SPL_USB_DWC3_GENERIC=y
|
|
CONFIG_SPL_USB_DWC3_AM62=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_SPL_DFU=y
|
|
CONFIG_LIB_RATIONAL=y
|
|
CONFIG_SPL_LIB_RATIONAL=y
|