forked from OERV-BSP/u-boot
The family of PCA9450 PMICs have the ability to perform system resets.
Restarting via PMIC is preferred method of restarting the system as all
the peripherals are brought to a know state after a power-cycle. The
PCA9450 features a cold restart procedure which is initiated by an I2C
command 0x14 to the SW_RST register.
Support in Linux for restarting via PCA9450 PMIC has been added by
Linux commit 6157e62b07d9 ("regulator: pca9450: Add restart handler").
Now add support for it also in the U-Boot via sysreset framework.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
159 lines
3.8 KiB
C
159 lines
3.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <fdtdec.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/lists.h>
|
|
#include <i2c.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/printk.h>
|
|
#include <power/pmic.h>
|
|
#include <power/regulator.h>
|
|
#include <power/pca9450.h>
|
|
#include <sysreset.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const struct pmic_child_info pmic_children_info[] = {
|
|
/* buck */
|
|
{ .prefix = "b", .driver = PCA9450_REGULATOR_DRIVER},
|
|
{ .prefix = "B", .driver = PCA9450_REGULATOR_DRIVER},
|
|
/* ldo */
|
|
{ .prefix = "l", .driver = PCA9450_REGULATOR_DRIVER},
|
|
{ .prefix = "L", .driver = PCA9450_REGULATOR_DRIVER},
|
|
{ },
|
|
};
|
|
|
|
static int pca9450_reg_count(struct udevice *dev)
|
|
{
|
|
return PCA9450_REG_NUM;
|
|
}
|
|
|
|
static int pca9450_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
|
int len)
|
|
{
|
|
if (dm_i2c_write(dev, reg, buff, len)) {
|
|
pr_err("write error to device: %p register: %#x!\n", dev, reg);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca9450_read(struct udevice *dev, uint reg, uint8_t *buff,
|
|
int len)
|
|
{
|
|
if (dm_i2c_read(dev, reg, buff, len)) {
|
|
pr_err("read error from device: %p register: %#x!\n", dev, reg);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca9450_bind(struct udevice *dev)
|
|
{
|
|
int children;
|
|
ofnode regulators_node;
|
|
|
|
regulators_node = dev_read_subnode(dev, "regulators");
|
|
if (!ofnode_valid(regulators_node)) {
|
|
debug("%s: %s regulators subnode not found!", __func__,
|
|
dev->name);
|
|
return -ENXIO;
|
|
}
|
|
|
|
debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
|
|
|
|
children = pmic_bind_children(dev, regulators_node,
|
|
pmic_children_info);
|
|
if (!children)
|
|
debug("%s: %s - no child found\n", __func__, dev->name);
|
|
|
|
/* Always return success for this device */
|
|
return 0;
|
|
}
|
|
|
|
static int pca9450_probe(struct udevice *dev)
|
|
{
|
|
unsigned int reset_ctrl;
|
|
int ret;
|
|
|
|
if (CONFIG_IS_ENABLED(SYSRESET)) {
|
|
ret = device_bind_driver_to_node(dev, "pca9450_sysreset",
|
|
"pca9450_sysreset",
|
|
dev_ofnode(dev), NULL);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (ofnode_read_bool(dev_ofnode(dev), "nxp,wdog_b-warm-reset"))
|
|
reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_WARM;
|
|
else
|
|
reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12;
|
|
|
|
return pmic_clrsetbits(dev, PCA9450_RESET_CTRL,
|
|
PCA9450_PMIC_RESET_WDOG_B_CFG_MASK, reset_ctrl);
|
|
}
|
|
|
|
static struct dm_pmic_ops pca9450_ops = {
|
|
.reg_count = pca9450_reg_count,
|
|
.read = pca9450_read,
|
|
.write = pca9450_write,
|
|
};
|
|
|
|
static const struct udevice_id pca9450_ids[] = {
|
|
{ .compatible = "nxp,pca9450a", .data = NXP_CHIP_TYPE_PCA9450A, },
|
|
{ .compatible = "nxp,pca9450b", .data = NXP_CHIP_TYPE_PCA9450BC, },
|
|
{ .compatible = "nxp,pca9450c", .data = NXP_CHIP_TYPE_PCA9450BC, },
|
|
{ .compatible = "nxp,pca9451a", .data = NXP_CHIP_TYPE_PCA9451A, },
|
|
{ .compatible = "nxp,pca9452", .data = NXP_CHIP_TYPE_PCA9452, },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pmic_pca9450) = {
|
|
.name = "pca9450 pmic",
|
|
.id = UCLASS_PMIC,
|
|
.of_match = pca9450_ids,
|
|
.bind = pca9450_bind,
|
|
.probe = pca9450_probe,
|
|
.ops = &pca9450_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_SYSRESET
|
|
static int pca9450_sysreset_request(struct udevice *dev, enum sysreset_t type)
|
|
{
|
|
u8 cmd = PCA9450_SW_RST_COLD_RST;
|
|
|
|
if (type != SYSRESET_COLD)
|
|
return -EPROTONOSUPPORT;
|
|
|
|
if (pmic_write(dev->parent, PCA9450_SW_RST, &cmd, 1)) {
|
|
dev_err(dev, "reset command failed\n");
|
|
} else {
|
|
/* tRESTART is 250ms, delay 300ms just to be sure */
|
|
mdelay(300);
|
|
/* Should not get here, warn if we do */
|
|
dev_warn(dev, "didn't respond to reset command\n");
|
|
}
|
|
|
|
return -EINPROGRESS;
|
|
}
|
|
|
|
static struct sysreset_ops pca9450_sysreset_ops = {
|
|
.request = pca9450_sysreset_request,
|
|
};
|
|
|
|
U_BOOT_DRIVER(pca9450_sysreset) = {
|
|
.name = "pca9450_sysreset",
|
|
.id = UCLASS_SYSRESET,
|
|
.ops = &pca9450_sysreset_ops,
|
|
};
|
|
#endif /* CONFIG_SYSRESET */
|