forked from OERV-BSP/u-boot
25e46f8281
This board clearly develops first in Linux which had more hardware listed, so let's start to use OF_UPSTREAM. This makes the NAND driver work. Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
36 lines
913 B
Plaintext
36 lines
913 B
Plaintext
CONFIG_ARM=y
|
|
CONFIG_COUNTER_FREQUENCY=50000000
|
|
CONFIG_ARCH_BCMBCA=y
|
|
CONFIG_TEXT_BASE=0x01000000
|
|
CONFIG_SYS_MALLOC_LEN=0x2000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
|
CONFIG_BCM6846=y
|
|
CONFIG_TARGET_BCM96846=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
|
|
CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96846"
|
|
CONFIG_SYS_BOOTM_LEN=0x4000000
|
|
CONFIG_SYS_LOAD_ADDR=0x01000000
|
|
CONFIG_IDENT_STRING=" Broadcom BCM6846"
|
|
CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
|
CONFIG_OF_UPSTREAM=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_CMD_UBIFS=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_OF_EMBED=y
|
|
CONFIG_CLK=y
|
|
CONFIG_MTD=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=nand0"
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_MTD_UBI_FASTMAP=y
|
|
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=n
|