ChuanN-sudo/u-boot
1
0
Fork 0
forked from OERV-BSP/u-boot
Code Pull Requests Activity
Files
7b20f70b0b1959950ff9d34cb1fcf785a1cf8672
u-boot/arch/arm/dts/exynos5250-smdk5250.dts
Sam Protsenko 4a29c0d36b arm: dts: exynos: Remove outdated DW MMC properties in all Exynos dts 
Upstream properties were added to device trees to follow current Linux
kernel. DW MMC driver was updated accordingly. Safely remove outdated
MMC properties. Details on removed properties are as follows:

* samsung,removable: replaced by non-removable
* samsung,bus-width: replaced by bus-width
* samsung,timing:
  - replaced by samsung,dw-mshc-ciu-div and samsung,dw-mshc-sdr-timing
    in dw_mmc nodes
  - removed from sdhci nodes (it's neither described in bindings, nor
    it's used in s5p_sdhci.c driver)
* fifoth_val: replaced by fifo-depth
* bus_hz: replaced by clock-frequency
* div: the fixed CIU clock divider value was moved to the chip data in
  exynos_dw_mmc.c driver

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2024-08-19 16:09:06 +09:00

322 lines
6.9 KiB
Plaintext
Raw Blame History

/*
* SAMSUNG SMDK5250 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5250.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
compatible = "samsung,smdk5250", "samsung,exynos5250";
aliases {
i2c0 = "/i2c@12C60000";
i2c1 = "/i2c@12C70000";
i2c2 = "/i2c@12C80000";
i2c3 = "/i2c@12C90000";
i2c4 = "/i2c@12CA0000";
i2c5 = "/i2c@12CB0000";
i2c6 = "/i2c@12CC0000";
i2c7 = "/i2c@12CD0000";
spi0 = "/spi@12d20000";
spi1 = "/spi@12d30000";
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
mmc0 = "/mmc@12200000";
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
i2s = "/sound@3830000";
};
sromc@12250000 {
compatible = "samsung,exynos5-sromc";
bank = <1>;
srom-timing = <1 9 12 1 6 1 1>;
width = <2>;
lan@5000000 {
compatible = "smsc,lan9215", "smsc,lan";
reg = <0x5000000 0x100>;
phy-mode = "mii";
};
};
sound@3830000 {
samsung,codec-type = "wm8994";
};
sound@12d60000 {
status = "disabled";
};
i2c@12C70000 {
wm8994: soundcodec@1a {
reg = <0x1a>;
u-boot,i2c-offset-len = <2>;
compatible = "wolfson,wm8994";
#sound-dai-cells = <1>;
};
};
sound {
compatible = "google,smdk5250-audio-wm8994";
samsung,model = "SMDK5250-I2S-WM8994";
samsung,audio-codec = <&wm8994>;
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&wm8994 0>;
};
};
i2c@12C60000 {
pmic@9 {
reg = <0x9>;
compatible = "maxim,max77686";
};
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;
samsung,start-warning = <95>;
samsung,start-tripping = <105>;
samsung,hw-tripping = <110>;
samsung,efuse-min-value = <40>;
samsung,efuse-value = <55>;
samsung,efuse-max-value = <100>;
samsung,slope = <274761730>;
samsung,dc-value = <25>;
};
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <2560>;
samsung,vl-row = <1600>;
samsung,vl-width = <2560>;
samsung,vl-height = <1600>;
samsung,vl-clkp;
samsung,vl-dp;
samsung,vl-bpix = <4>;
samsung,vl-hspw = <32>;
samsung,vl-hbpd = <80>;
samsung,vl-hfpd = <48>;
samsung,vl-vspw = <6>;
samsung,vl-vbpd = <37>;
samsung,vl-vfpd = <3>;
samsung,vl-cmd-allow-len = <0xf>;
samsung,winid = <3>;
samsung,interface-mode = <1>;
samsung,dp-enabled = <1>;
samsung,dual-lcd-enabled = <0>;
};
dp@145b0000 {
samsung,lt-status = <0>;
samsung,master-mode = <0>;
samsung,bist-mode = <0>;
samsung,bist-pattern = <0>;
samsung,h-sync-polarity = <0>;
samsung,v-sync-polarity = <0>;
samsung,interlaced = <0>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
};
mmc@12200000 {
bus-width = <8>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <1 3>;
non-removable;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
bus-width = <4>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <1 2>;
};
mmc@12230000 {
status = "disabled";
};
ehci@12110000 {
samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
};
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
max77686@09 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.2V_LDO_OUT2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "P2.8V_LDO_OUT4";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo5_reg: LDO5 {
regulator-name = "P1.8V_LDO_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo6_reg: LDO6 {
regulator-name = "P1.1V_LDO_OUT6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "P1.8V_LDO_OUT11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo13_reg: LDO13 {
regulator-name = "P1.8V_LDO_OUT13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
View Git Blame Copy Permalink