forked from OERV-BSP/u-boot
70a4d1fa1d
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
74 lines
1.7 KiB
Plaintext
74 lines
1.7 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_COUNTER_FREQUENCY=16666666
|
|
CONFIG_SYS_INIT_SP_BSS_OFFSET=1048576
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_RENESAS=y
|
|
CONFIG_TEXT_BASE=0x50000000
|
|
CONFIG_SYS_MALLOC_LEN=0x4000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x80000
|
|
CONFIG_ENV_SIZE=0x20000
|
|
CONFIG_ENV_OFFSET=0xFFFE0000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="renesas/r9a07g044l2-smarc"
|
|
CONFIG_RZG2L=y
|
|
CONFIG_SYS_MONITOR_LEN=1048576
|
|
CONFIG_SYS_LOAD_ADDR=0x58000000
|
|
CONFIG_REMAKE_ELF=y
|
|
CONFIG_FIT=y
|
|
CONFIG_SUPPORT_RAW_INITRD=y
|
|
CONFIG_USE_BOOTARGS=y
|
|
CONFIG_SYS_PBSIZE=2068
|
|
# CONFIG_BOARD_EARLY_INIT_F is not set
|
|
# CONFIG_BOARD_INIT is not set
|
|
CONFIG_SYS_MALLOC_BOOTPARAMS=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_CLK=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_PART=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_MULTI_DTB_FIT_LZO=y
|
|
CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ENV_MMC_EMMC_HW_PARTITION=2
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_RENESAS=y
|
|
# CONFIG_CLK_RCAR_GEN3 is not set
|
|
CONFIG_GPIO_HOG=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_MMC_IO_VOLTAGE=y
|
|
CONFIG_MMC_UHS_SUPPORT=y
|
|
CONFIG_MMC_HS400_SUPPORT=y
|
|
CONFIG_PHY_MICREL=y
|
|
CONFIG_PHY_MICREL_KSZ90X1=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_PMIC_RAA215300=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_RAA215300=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_OHCI_GENERIC=y
|
|
CONFIG_USB_STORAGE=y
|