Files
u-boot/drivers
Weijie Gao dfbadb86b3 pci: mediatek: add support for multiple ports in mediatek pcie gen3 driver
One MediaTek PCIe Gen3 controller has only one port, where PCI bus 0
on this port represents the controller itself and bus 1 represents
the external PCIe device.

If multiple PCIe controllers are probed in U-Boot, U-Boot will use
bus numbers greater than 2 as input parameters. Therefore, we should
convert the BDF bus number to either 0 or 1 by subtracting the
offset by controller->seq_.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2025-01-23 12:11:49 -06:00
..
2025-01-20 19:26:54 -06:00
2024-10-11 11:44:48 -06:00
2024-12-07 09:07:04 -03:00
2024-12-24 18:07:53 +01:00
2024-12-23 08:10:15 -03:00
2024-11-20 17:57:58 +01:00
2024-12-11 08:36:24 +01:00
2024-10-11 11:44:48 -06:00
2025-01-20 19:26:54 -06:00
2025-01-20 19:26:54 -06:00
2025-01-22 16:43:54 +01:00
2023-11-07 14:50:51 -05:00
2024-10-11 11:44:48 -06:00
2024-04-26 08:28:35 +03:00
2024-10-11 11:44:48 -06:00
2025-01-20 19:26:54 -06:00