forked from OERV-BSP/u-boot
4a29c0d36b
Upstream properties were added to device trees to follow current Linux
kernel. DW MMC driver was updated accordingly. Safely remove outdated
MMC properties. Details on removed properties are as follows:
* samsung,removable: replaced by non-removable
* samsung,bus-width: replaced by bus-width
* samsung,timing:
- replaced by samsung,dw-mshc-ciu-div and samsung,dw-mshc-sdr-timing
in dw_mmc nodes
- removed from sdhci nodes (it's neither described in bindings, nor
it's used in s5p_sdhci.c driver)
* fifoth_val: replaced by fifo-depth
* bus_hz: replaced by clock-frequency
* div: the fixed CIU clock divider value was moved to the chip data in
exynos_dw_mmc.c driver
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
253 lines
5.6 KiB
Plaintext
253 lines
5.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Odroid-U3/X2 board device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4412.dtsi"
|
|
|
|
/ {
|
|
model = "Odroid based on Exynos4412";
|
|
compatible = "samsung,odroid", "samsung,exynos4412";
|
|
|
|
aliases {
|
|
serial0 = "/serial@13800000";
|
|
console = "/serial@13810000";
|
|
mmc0 = &mshc_0;
|
|
mmc2 = &sdhci2;
|
|
};
|
|
|
|
serial@13810000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ehci@12580000 {
|
|
compatible = "samsung,exynos-ehci";
|
|
reg = <0x12580000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
phy {
|
|
compatible = "samsung,exynos-usb-phy";
|
|
reg = <0x125B0000 0x100>;
|
|
};
|
|
};
|
|
|
|
emmc-reset {
|
|
compatible = "samsung,emmc-reset";
|
|
reset-gpio = <&gpk1 2 0>;
|
|
};
|
|
};
|
|
|
|
&i2c_0 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
status = "okay";
|
|
|
|
max77686: max77686_pmic@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <7 0>;
|
|
reg = <0x09 0 0>;
|
|
#clock-cells = <1>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_VM1M2_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VCC_1.8V_AP";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_MMC2_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDDQ_MMC0/1/3_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VMPLL_1.0V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VPLL_1.1V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD_MIPI/HDMI_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDD_MIPI/HDMI_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD_ABB1_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD_UOTG_3.0V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDD_C2C_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD_ABB02_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD_HSIC/OTG_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD_HSIC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "VDDQ_CAM_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VDDQ_EMMC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "TFLASH_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "VDDQ_EMMC_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-compatible = "LDO25";
|
|
regulator-name = "VDDQ_LCD_3.0V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VDD_MIF_1.0V";
|
|
regulator-min-microvolt = <8500000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VDD_ARM_1.0V";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VDD_INT_1.1V";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "VDD_G3D_1.0V";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDDQ_AP_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "VCC_INL1/7_1.35V";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "VCC_INL2/3/5_2.0V";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "VCC_P3V3_2.85V";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhci2 {
|
|
bus-width = <4>;
|
|
cd-inverted;
|
|
cd-gpios = <&gpk2 2 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mshc_0 {
|
|
bus-width = <8>;
|
|
samsung,dw-mshc-ciu-div = <0>;
|
|
samsung,dw-mshc-sdr-timing = <2 1>;
|
|
non-removable;
|
|
fifo-depth = <0x80>;
|
|
clock-frequency = <400000000>;
|
|
index = <4>;
|
|
status = "okay";
|
|
};
|