forked from OERV-BSP/u-boot
12ea40d29d
Add support for the Libre Computer aml-s905d3-cc "Solitude" board: https://libre.computer/products/aml-s905d3-cc/ The Solitude board has a Credit Card form factor, similar to the the previous "Le Potato" card, but with the Amlogic A311D SoC, MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C connector replacing the microUSB one for power and USB 2.0. The board has an embedded SPI NOR flash, and EFI Capsule support is added. The GUID is dynamically generated for the board, to get it: => efidebug capsule esrt ======================================== ESRT: fw_resource_count=1 ESRT: fw_resource_count_max=1 ESRT: fw_resource_version=1 [entry 0]============================== ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success ======================================== On the host (with the aml_encrypt_g12a result binary): $ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap On the board (from USB disk containing u-boot.cap at root): => load usb 0:1 $kernel_addr_r u-boot.cap => efidebug capsule update $kernel_addr_r The binary will then be flashed on the SPI. Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
109 lines
2.6 KiB
Plaintext
109 lines
2.6 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SYS_VENDOR="libre-computer"
|
|
CONFIG_SYS_BOARD="aml-s905d3-cc"
|
|
CONFIG_ARCH_MESON=y
|
|
CONFIG_TEXT_BASE=0x01000000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_OFFSET=0xFFFF0000
|
|
CONFIG_ENV_SECT_SIZE=0x10000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-s905d3-libretech-cc"
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_MESON_G12A=y
|
|
CONFIG_DEBUG_UART_BASE=0xff803000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_IDENT_STRING="aml-s905d3-cc"
|
|
CONFIG_SYS_LOAD_ADDR=0x1000000
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_REMAKE_ELF=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_SIGNATURE=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_LEGACY_IMAGE_FORMAT=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_SYS_MAXARGS=32
|
|
# CONFIG_CMD_BDI is not set
|
|
# CONFIG_CMD_IMI is not set
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_NVEDIT_EFI=y
|
|
CONFIG_CMD_GPIO=y
|
|
# CONFIG_CMD_LOADS is not set
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF_TEST=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_EFIDEBUG=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ADC=y
|
|
CONFIG_SARADC_MESON=y
|
|
CONFIG_BUTTON=y
|
|
CONFIG_BUTTON_ADC=y
|
|
CONFIG_DFU_RAM=y
|
|
CONFIG_DFU_SF=y
|
|
CONFIG_SET_DFU_ALT_INFO=y
|
|
CONFIG_MMC_MESON_GX=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_PHY_REALTEK=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_DM_MDIO_MUX=y
|
|
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
|
CONFIG_MDIO_MUX_MESON_G12A=y
|
|
CONFIG_MESON_G12A_USB_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_MESON_G12A=y
|
|
CONFIG_POWER_DOMAIN=y
|
|
CONFIG_MESON_EE_POWER_DOMAIN=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
CONFIG_DEBUG_UART_SKIP_INIT=y
|
|
CONFIG_MESON_SERIAL=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_MESON_SPIFC=y
|
|
CONFIG_SYSINFO=y
|
|
CONFIG_SYSINFO_SMBIOS=y
|
|
CONFIG_USB=y
|
|
CONFIG_DM_USB_GADGET=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_DWC3=y
|
|
# CONFIG_USB_DWC3_GADGET is not set
|
|
CONFIG_USB_DWC3_MESON_G12A=y
|
|
CONFIG_USB_KEYBOARD=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_VIDEO=y
|
|
# CONFIG_VIDEO_BPP8 is not set
|
|
# CONFIG_VIDEO_BPP16 is not set
|
|
CONFIG_SYS_WHITE_ON_BLACK=y
|
|
CONFIG_VIDEO_MESON=y
|
|
CONFIG_VIDEO_DT_SIMPLEFB=y
|
|
CONFIG_SPLASH_SCREEN=y
|
|
CONFIG_SPLASH_SCREEN_ALIGN=y
|
|
CONFIG_VIDEO_BMP_RLE8=y
|
|
CONFIG_BMP_16BPP=y
|
|
CONFIG_BMP_24BPP=y
|
|
CONFIG_BMP_32BPP=y
|
|
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
|
|
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|