Shaohui Xie
e994dddbbe
armv8/ls1043ardb: Add support for >2GB memory
...
This patch also expose the complete DDR region(s) to Linux.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com >
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-12-13 18:27:29 -08:00
Thomas Chou
9e39003e7f
ns16550: move CONFIG_SYS_NS16550 to Kconfig
...
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw >
2015-11-21 21:50:18 -05:00
Hou Zhiqiang
831c068fcf
armv8/ls1043a: Enable secondary cores
...
After the secondary cores enter U-Boot, use CONFIG_ARMV8_MULTIENTRY to
make secondary cores excute in spin loop.
Signed-off-by: Hou Zhiqiang <B48286@freescale.com >
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com >
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-10-29 10:34:02 -07:00
Gong Qianyu
c7ca8b07fc
armv8/ls1043ardb: Add sd boot support
...
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-10-29 10:34:02 -07:00
Yangbo Lu
8ef0d5c438
armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb
...
This patch adds esdhc support for ls1043ardb.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com >
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-10-29 10:34:01 -07:00
Shaohui Xie
e82973414d
armv8/ls1043a: Add Fman support
...
Signed-off-by: Hou Zhiqiang <B48286@freescale.com >
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com >
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com >
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-10-29 10:34:01 -07:00
Gong Qianyu
3ad4472923
armv8/ls1043ardb: Add nand boot support
...
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
Signed-off-by: Hou Zhiqiang <B48286@freescale.com >
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com >
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com >
Reviewed-by: York Sun <yorksun@freescale.com >
2015-10-29 10:34:01 -07:00
Mingkai Hu
f3a8e2b7d4
armv8/ls1043ardb: Add LS1043ARDB board support
...
LS1043ARDB Specification:
-------------------------
Memory subsystem:
* 2GByte DDR4 SDRAM (32bit bus)
* 128 Mbyte NOR flash single-chip memory
* 512 Mbyte NAND flash
* 16 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
Ethernet:
* XFI 10G port
* QSGMII with 4x 1G ports
* Two RGMII ports
PCIe:
* PCIe2 (Lanes C) to mini-PCIe slot
* PCIe3 (Lanes D) to PCIe slot
USB 3.0: two super speed USB 3.0 type A ports
UART: supports two UARTs up to 115200 bps for console
Signed-off-by: Hou Zhiqiang <B48286@freescale.com >
Signed-off-by: Li Yang <leoli@freescale.com >
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com >
Signed-off-by: York Sun <yorksun@freescale.com >
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com >
2015-10-29 10:34:01 -07:00
