Initially, only one STM32MP25 based board was available, the
stm32mp257f-ev1 board which was set by default in stm32mp25_defconfig.
Since commit 79f3e77133 ("Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstream")
we inherited of a second MP25 based board which is the stm32mp257f-dk board.
Enable OF_UPSTREAM_BUILD_VENDOR and set OF_UPSTREAM_VENDOR to allow all
STMicroelectronics DT compilation.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Enable the following configs:
- CONFIG_MFD_STM32_TIMERS: enables support for the STM32 multifunction
timer
- CONFIG_DM_PWM: enables support for pulse-width modulation devices
- CONFIG_CMD_PWM: enables 'pwm' command to control PWM channels
- CONFIG_PWM_STM32: enables support for the STM32 PWM devices
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Due activation of SCMI, we need to increase SYS_MALLOC_F_LEN value
to avoid following message:
U-Boot 2025.04-01224-g75b77a2a6d31-dirty (Apr 25 2025 - 11:23:30 +0200)
alloc space exhausted ptr 400040 limit 400000
alloc space exhausted ptr 400020 limit 400000
alloc space exhausted ptr 400060 limit 400000
alloc space exhausted ptr 400060 limit 400000
Set SYS_MALLOC_F_LEN to 0x60000 to fix this issue.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Enable DISTRO_DEFAULT and BOOTCOMMAND flags for stm32mp25
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cover-letter:
arm: stm32mp: STM32MP25 machine update
This series is updating STM32MP25 machine/board support:
_ update cmd_stm32key.
_ update cmd_stm32prog.
_ update STM32MP25 configs.
_ add leds and buttons support.
_ add boot_mode support (USB/PXE/MMC/NOR/NAND).
_ add bootcmd support.
_ enable MMC support.
Currently, it misses clock,reset and regulator support for STM32MP25
which will be added in a next step due to dependencies with OP-TEE.
For example, due to OP-TEE dependencies, all MMC support is ready
but not functional.
END
Series-version: 2
Series-changes: 2
- Enable DISTRO_DEFAULT and BOOTCOMMAND flags
Add support of UBI boot and activate the needed
configuration for U-Boot environment in UBI volume for
NAND or in a MTD partition for NOR device, SPI Flash:
ENV_OFFSET, ENV_OFFSET_REDUND, ENV_SECT_SIZE is
aligned with the default MTD partition on NOR device
of the STMicroelectronics boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add led support, force default state on U-Boot initialization and put on
the Linux heartbeat led = "blue-led" during U-Boot execution.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Use the boot instance to select the correct mmc device identifier,
this patch only to save the environment on eMMC = MMC(1) on
STMicroelectronics boards.
Set the CONFIG_SYS_MMC_ENV_DEV to -1 to select the mmc boot instance
by default.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add support of all the boot mode supported by STM32MP25x family
with information provided by TF-A in backup register
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Enable OF_UPSTREAM flag for STM32MP2 platforms.
Add fixed-clock ck_flexgen_08 and ck_icn_ls_mcu until STM32MP25
clock driver will be available.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
In arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c, in init_device(),
in case of RAW_IMAGE, part->size = block_dev->lba * block_dev->blksz.
_ part->size is declared as u64.
_ block_dev->lba is declared as lbaint_t which is uint64_t
if CONFIG_SYS_64BIT_LBA is enable, otherwise ulong.
_ block_dev->blksz is declared as unsigned long.
For example, in case block_dev->lba = 0x1dacc00, block_dev->blksz = 0x200
then part->size 0x5980000 which is incorrect as both are declared as ulong.
To fix this overflow issue, enable CONFIG_SYS_64BIT_LBA, block_dev->lba is
then declared as uint64_t and part->size get the correct value 0x3b5980000.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The LMB memory maps are now being maintained through a couple of
alloced lists, one for the available(added) memory, and one for the
used memory. These lists are not static arrays but can be extended at
runtime. Remove the config symbols which were being used to define the
size of these lists with the earlier implementation of static arrays.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The BLK symbol is used both for "we have a block device subsystem
enabled" and "we need to utilize the block device library functions". In
the case of efi_loader, it is the case of "we need to utilize the block
device library", so select rather than depends on it. In turn, also
disable EFI_LOADER on platforms which did not have it on previously due
to a lack of block devices. They can enable it themselves if desired.
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
None of these platforms enabled a networking devices, and disabled
CMD_NET. Given that we used to gate network support on CMD_NET rather
than NET, we disable CONFIG_NET on these platforms now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add initial support for STM32MP2 SoCs family.
SoCs information are available here :
https://www.st.com/content/st_com/en/campaigns/microprocessor-stm32mp2.html
Migrate all MP1 related code into stm32mp1/ directory
Create stm32mp2 directory dedicated for STM32MP2 SoCs.
Common code to MP1, MP13 and MP25 is kept into
arch/arm/mach-stm32/mach-stm32mp directory :
- boot_params.c
- bsec
- cmd_stm32key
- cmd_stm32prog
- dram_init.c
- syscon.c
- ecdsa_romapi.c
For STM32MP2, it also :
- adds memory region description needed for ARMv8 MMU.
- enables early data cache before relocation.
During the transition before/after relocation, the MMU, initially setup
at the beginning of DDR, must be setup again at a correct address after
relocation. This is done in enables_caches() by disabling cache, force
arch.tlb_fillptr to NULL which will force the MMU to be setup again but
with a new value for gd->arch.tlb_addr. gd->arch.tlb_addr has been
updated after relocation in arm_reserve_mmu().
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
