ChuanN-sudo/u-boot
1
0
Fork 0
forked from OERV-BSP/u-boot
Code Pull Requests Activity
97,962 Commits 2 Branches 0 Tags
8d2d615f14435c8d2d4e80509310691443b3a3d5
Commit Graph

15956 Commits

Author SHA1 Message Date
Wolfgang Denk
8ff0208d31 Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:55:43 +01:00
Wolfgang Denk
f47b661141 RPXlite configuration fixes 
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:48:55 +01:00
Wolfgang Denk
aba9f1af60 Memory configuration changes for ZPC.1900 board 
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:45:44 +01:00
Wolfgang Denk
5797b821dc Add support for Adder boards with 16MB SDRAM; 
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:43:03 +01:00
Markus Klotzbücher
8371a2c0d4 Enable simple (non-redundant) NAND environment on delta board. 2006-03-08 00:13:40 +01:00
Wolfgang Denk
951a954b77 Merge with /home/wd/git/u-boot/master 
Code cleanup.
 2006-03-06 23:18:48 +01:00
Markus Klotzbücher
ac7d97dcbb Turned on SDRAM scrubbing. 2006-03-06 18:47:44 +01:00
Markus Klotzbücher
43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash 
Controller.
 2006-03-06 15:04:25 +01:00
Markus Klotzbücher
f9e029184b NAND finally working. Two bugs fixed: 
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
 2006-03-06 13:45:42 +01:00
Wolfgang Denk
bfc81252c0 Minor code cleanup 2006-03-06 13:03:37 +01:00
Wolfgang Denk
4e3ccd2692 Merge the new NAND code (testing-NAND brach); see doc/README.nand 
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005

[Merge with /home/tur/nand/u-boot]
 2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific 
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
 2006-03-05 18:57:33 +01:00
Markus Klotzbücher
bf7cac033b Lots of new stuff: 
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
 2006-03-04 18:35:51 +01:00
Markus Klotzbücher
00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Wolfgang Denk
82f2e33a8d Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, 
use hush shell.
 2006-02-28 18:39:20 +01:00
Markus Klotzbücher
6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Wolfgang Denk
f6c0068fc1 Merge with Stefan Roese's branch with CFI driver fixes 2006-02-28 16:42:50 +01:00
Wolfgang Denk
36d2c5387d Merge with /home/wd/git/u-boot/master 2006-02-28 16:39:47 +01:00
Stefan Roese
58ad497833 Convert mcc200 to use common CFI flash driver 
Patch by Stefan Roese, 28 Feb 2006
 2006-02-28 15:33:28 +01:00
Markus Klotzbücher
0377dca227 Merge /home/tur/nand/u-boot/ 
This is a first version of the testing-NAND branch merged back to main.
 2006-02-24 14:16:31 +01:00
Markus Klotzbücher
7d4d1ce48c Merge branch 'master' of http://www.denx.de/git/u-boot 2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Markus Klotzbücher
599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbücher
ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems, 
we only see 64MB.
 2006-02-22 14:05:44 +01:00
Wolfgang Denk
6624b687bc Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
Wolfgang Denk
5f0be01356 Disable CMD_BSP for SMMACO4 board. 2006-02-22 02:39:31 +01:00
Wolfgang Denk
9cdc838613 Merge with /home/hs/PanDacom/u-boot-dev 2006-02-22 01:59:13 +01:00
Wolfgang Denk
86ea5f93d7 Initial port to MCC200 board (work in progress) 
Minimally modified patch by Bluetechnix, Vienna
 2006-02-22 00:43:16 +01:00
Wolfgang Denk
654c2d2836 Merge with /home/sr/git/u-boot 2006-02-21 16:41:43 +01:00
Heiko Schocher
075866d840 [Patch] Add basic support for the SMMACO4 Board from PanDaCom. 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2006-02-20 17:34:12 +01:00
Markus Klotzbücher
4f7a0e3671 New board directory and config for the benq delta board (copied from 
zylonite). Minor pxa-regs.h update.
 2006-02-20 16:37:37 +01:00
Markus Klotzbücher
8fb1857b40 Merged and added more pxa-regs.h stuff, especially the GPIO Control 
Register Definitions.
 2006-02-20 15:59:07 +01:00
Markus Klotzbücher
57dc57f14d Merged sufficient changes to pxa-regs.h in order to make u-boot compile. 
It doesn't run yet.
 2006-02-19 16:03:49 +01:00
Kumar Gala
2688e2f972 Enable address translation on MPC83xx 
Patch by Kumar Gala, 10 Feb 2006
 2006-02-10 15:40:06 -06:00
Markus Klotzbücher
6ece03f267 Config updated for compiling the SMC911111 network driver 2006-02-10 17:08:26 +01:00
Markus Klotzbücher
b3c36e6b94 basic u-boot is working, boots into the command shell. 2006-02-09 13:19:25 +01:00
Stefan Roese
79830d591a Convert CPCI750 to use common CFI flash driver 
Patch by Reinhard Arlt, 8 Feb 2006
 2006-02-08 15:54:15 +01:00
Markus Klotzbücher
af646e865f Forgot to add files to zylonite branch. 2006-02-07 20:48:45 +01:00
Stefan Roese
48a05a5188 Various changes to esd HH405 board specific files 
Patch by Matthias Fuchs, 07 Feb 2006
 2006-02-07 16:51:04 +01:00
Wolfgang Denk
84e106c09d Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
Zachary P. Landau
3a108ed868 Add support for r5200 board 2006-01-26 17:37:59 -05:00
Stefan Roese
a7b9fb9110 Add VGA support (CT69000) to CPCI750 board. 
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005
 2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file. 
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
 2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e Fix 28F256J3A support on PM520 board 
(without bank-switching only 32 MB can be accessed)
 2006-01-13 17:00:56 +01:00
Kumar Gala
86902b8e36 Added PCI support for MPC8349ADS board 
Patch by Kumar Gala 11 Jan 2006
 2006-01-12 19:51:38 -06:00
Kumar Gala
e4f880eddd Added CONFIG_ options for bd_t and env in flat dev tree 
CONFIG_OF_HAS_BD_T will put a copy of the bd_t
      into the resulting flat device tree.

      CONFIG_OF_HAS_UBOOT_ENV will copy the environment
      variables from u-boot into the flat device tree

Patch by Kumar Gala 11 Jan 2006
 2006-01-11 13:49:31 -06:00
Kumar Gala
9260a56151 Make System IO Config Registers board configurable on MPC83xx 
Patch by Kumar Gala, 11 Jan 2006
 2006-01-11 11:12:57 -06:00
Wolfgang Denk
c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Marian Balakowicz
3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00