Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Unless function names are requested, the logging system should not
compile these into the code. Adjust the macros to handle this.
This means that turning on function names at runtime won't work unless
CONFIG_LOGF_FUNC is enabled. We could perhaps split this into a
separate option if that is a problem.
Enable CONFIG_LOGF_FUNC logging for sandbox since the tests expect the
function names to be included. Fix up the pinmux test which checks a
logging statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Enable 'cat' command to print file from filesystem to stdout.
Enable 'xxd' command to hexdump file from filesystem to stdout.
Signed-off-by: Marek Vasut <marex@denx.de>
Enable MMC subsystem and DW MMC driver support to make eMMC functional.
Also enable a couple of related commands so the user can make use of
eMMC from U-Boot shell.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Enable OF_UPSTREAM for Keystone boards. Remove DT files that
are now available in dts/upstream.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of SPI booting.
Signed-off-by: Andrew Davis <afd@ti.com>
Currently, the devicetree model as well as the board variant name
are shown:
...
Model: TQ TQMa6S/DL on MBa6x
Board: TQMa6DL on a MBa6x
...
Unselect the CONFIG_DISPLAY_BOARDINFO option so that the
board name is printed only once in board_late_init() instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Instead of using the local imx6-tqma6 devicetree copies from U-Boot,
convert the imx6-tqma6 target to OF_UPSTREAM so that the upstream
kernel devicetrees can be used instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Commit 68dcbdd594 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam <festevam@denx.de>
These use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These boards use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These boards use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Please pull the updates for rockchip platform:
- Add board support:
RK3566: Radxa ROCK 3 Model C
Radxa ZERO 3W/3E
Xunlong Orange Pi 3B
RK3568J: Radxa ROCK 3B
RK3308B: Radxa ROCK S0
RK3588: Radxa ROCK 5 ITX
FriendlyElec CM3588 NAS board
- dw-mmc: allow 4-bit mode;
- dts and config updates;
CI:
https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/21997
USB Type-C port is configured as "peripheral" port. so enable "ums"
command to use as USB Mass Storage device.
("rockusb" command is already enabled and working)
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
With the commit 6afdb15851 ("dm: core: migrate debug() messages to use
dm_warn") use of DM_WARN/SPL_DM_WARN print a lot of debug messages.
Disable the SPL_DM_WARN Kconfig option to remove verbose logging and
restore normal serial console output during boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
The naming scheme with the dashes follows Dragan's comment on the mainline
devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is
fine, but it should be "rock-5-itx", simply because there's a space
between "5" and "ITX" in "ROCK 5 ITX"
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
EFI HTTP is a useful option to have by default and is working reliably on
QEMU. Let's enable it by default, since we have no size limitations.
While at it enable 'efidebug' as well, which is currently needed to
configure the EFI HTTP boot options.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
Universal Payload (UPL) is an Industry Standard for firmware
components[1]. UPL is designed to improve interoperability within the
firmware industry, allowing mixing and matching of projects with less
friction and fewer project-specific implementations. UPL is
cross-platform, supporting ARM, x86 and RISC-V initially.
This series provides some initial support for this, targeting 0.9.1 and
sandbox only.
Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests
Use the sandbox_vpl build to test UPL since it supports a real devicetree
in SPL. The sandbox_spl build uses OF_PLATDATA.
Enable writing the UPL handoff in SPL and reading it in U-Boot proper.
Provide a test to check that this handoff works.
Note that the test uses the standard devicetree rather than the test one,
since it is a lot smaller and fits in the existing bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Universal Payload provides a standard way of handing off control between
two firmware phases. Add support for reading the handoff information into
a structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based
on the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
Features tested on a CM3588 NAS Kit with 8GB RAM 64GB eMMC module:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.
The two hw revisions use different io-voltage for Ethernet PHY and can
be identified using GPIO4_C4:
- v1.1.1: x (internal pull-down)
- v2.1: PHY_RESET (external pull-up)
Implement rk_board_late_init() to set correct fdtfile env var and
board_fit_config_name_match() to load correct FIT config based on what
board is detected at runtime so a single board target can be used for
both hw revisions.
Minimal DTs that includ DT from dts/upstream is added to support booting
from both hw revision and only set Ethernet PHY io-voltage when the hw
revision is detected at runtime. A side-affect of this is that defconfig
show OF_UPSTREAM=n, however dts/upstream DTs is used for this board.
Features tested on Orange Pi 3B 4GB (v1.1.1 and v2.1):
- SD-card boot
- eMMC boot
- SPI Flash boot
- Ethernet
- PCIe/NVMe
- USB host
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
Co-developed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
computer based on the Rockchip RK3566, with a compact form factor and
rich interfaces.
Implement rk_board_late_init() to set correct fdtfile env var and
board_fit_config_name_match() to load correct FIT config based on what
board is detected at runtime so a single board target can be used for
both board models.
Features tested on a ZERO 3W 8GB v1.11:
- SD-card boot
- eMMC boot
- USB gadget
- USB host
Features tested on a ZERO 3E 4GB v1.2:
- SD-card boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Features tested on ROCK 3B 8GB v1.51 (both variants):
- SD-card boot
- eMMC boot
- SPI Flash boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Radxa ROCK S0 is a single-board computer based on the Rockchip RK3308B
SoC in an ultra-compact form factor. Add a board target for the board.
Features tested on a ROCK S0 v1.2 with 512 MiB RAM and 8 GiB eMMC:
- SD-card boot
- eMMC boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add LED=y and LED_GPIO=y to support the onboard leds.
Add ROCKCHIP_IODOMAIN=y to configure correct io voltage domains.
Add DM_MDIO=y now that the DT contain a Ethernet phy node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
RK3399 Puma has support for driving multiple displays at the same time,
the most notable scenario being HDMI+DSI since there exists a devkit
with both DSI display and HDMI output.
While HDMI seems to work fine in U-Boot, as the U-Boot logo is shown
whenever the EFI bootmeth is used, it messes up DSI in HDMI+DSI setup in
the Linux kernel. There are some ways to work around this bug but no
known appropriate fix for now, so let's rather not trigger this bug.
Since there isn't any client of ours that seems to be using this
feature, let's disable it for now. Users can re-enable this feature in
the event they have HDMI-only products.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for Rockchip Toybrick TB-RK3588X has been merged into
dts/upstream with devicetree-rebasing v6.10-dts, migrate board to
OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for Pine64 PineTab2 has been merged into dts/upstream
with devicetree-rebasing v6.10-dts, migrate board to OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Conversion to DM_I2C is mandatory, enable DM_I2C
to disable board removal warning. Convert EEPROM
and IT6251 access to use DM_I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
This converts the sniper board (LG P970) to device-tree control
and DM I2C, both for SPL and U-Boot.
Note that we lose the call to board_mmc_power_init to enable power
for MMC2. This is now expected to take place through proper
regulators, which are not yet available with the twl4030 driver.
The call to twl4030_power_mmc_init is moved to spl_board_init for now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
