ChuanN-sudo/u-boot
1
0
Fork 0
forked from OERV-BSP/u-boot
Code Pull Requests Activity
16,364 Commits 2 Branches 0 Tags
74e738e8cc3d48cfc6c330c8a2b083c105cfd13d
Commit Graph

11 Commits

Author SHA1 Message Date
Vikram Narayanan
a9407f2bc5 imx: Remove unneeded/repititive definitions from imx headers 
Remove gpio related unused/repititive definitions from imx headers.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
 2012-04-16 14:53:59 +02:00
Eric Nelson
08c61a589b mxc_spi: move machine specifics into CPU headers 
Move (E)CSPI register declarations into the imx-regs.h files for each supported CPU

Introduce two new macros to control conditional setup
     MXC_CSPI - Used for processors with the Configurable Serial Peripheral Interface (MX3x)
     MXC_ECSPI - For processors with Enhanced Configurable... (MX5x, MX6x)

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <jason.hui@linaro.org>
Tested-by: Jason Liu <jason.hui@linaro.org>
 2012-02-27 21:19:23 +01:00
Stefano Babic
40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef 
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
 2011-12-06 23:59:40 +01:00
Stefano Babic
f6dc192e14 MX35: Drop unnecessary prototypes from imx-regs.h 
Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-11-03 22:56:18 +01:00
Stefano Babic
324a131e7c MX35: factorize common assembly code 
Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-11-03 22:56:18 +01:00
Stefano Babic
e0a83cc1f5 MX35: add pins definition for UART3 
Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-11-03 22:56:17 +01:00
Stefano Babic
9d940442d3 MX35: added ESDC structure to imx-regs 
The structure and PLL defines are added to
the imx-regs.h file and dropped from board
header files.

Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-11-03 22:56:17 +01:00
Marek Vasut
8edcc6f221 FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h 
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
 2011-09-30 22:01:03 +02:00
Stefano Babic
729b74add9 MX35: make use of GPIO framework for MX35 processor 
Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-09-04 11:36:11 +02:00
Stefano Babic
ac87c17d34 SPI: mxc_spi: replace fixed offsets with structures 
This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.

Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-02-02 00:54:43 +01:00
Stefano Babic
b9bb053159 Add support for MX35 processor 
The patch adds basic support for the Freescale's i.MX35
(arm1136 based) processor.

The patch adds also a prototype for the initialization
of the FEC(ethernet controller) to netdev.h to avoid
warnings.

Signed-off-by: Stefano Babic <sbabic@denx.de>
 2011-02-02 00:54:42 +01:00