u-boot-dfu-next-20240820
- Migrate Atmel usb gadget to DM_USB_GADGET
- More small cleanups/improvements on the atmel UDC driver
- Change udc uclass name from "usb" -> "usb_gadget"
Currently both USB host uclass and USB gadget uclass are using the same
name "usb" which break uclass functions like uclass_get_by_name().
Rename the uclass to "usb_gadget" to fix, also makes bind/unbind by class
index (or sequence) working.
This breaks the capacity of using "usb" as DT alias sequence numbering
which needs a fix afterwards.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/all/20240802092820.917450-1-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This is only used by devkit3250 which is being removed. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
The revision is different for these, add the additional check as in
xhci-dwc3 core_init code.
Equivalent upstream Linux patch:
690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
The existing API for these functions is different from the rest of
U-Boot, in that any error code must be obtained from the errno variable
on failure. This variable is part of the C library, so accessing it
outside of the special 'sandbox' shim-functions is not ideal.
Adjust the API to return an error code, to avoid this. Update existing
uses to check for any negative value, rather than just -1.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add driver model support by using the uclass UCLASS_USB_GADGET_GENERIC.
Disable local usb_gadget_register_driver()/usb_gadget_unregister_driver()
implementation which is implemented in udc-core.c when DM_USB_GADGET
is enabled.
Replace dm_usb_gadget_handle_interrupts() with handle_interrupts ops
when DM_USB_GADGET is enabled.
Disable legacy struct usba_udc controller as controller point is extracted
from udevice private data with DM.
Disable legacy usba_udc_probe() to avoid conflict with DM when it's
enabled.
Compared to Linux driver only supported devices' DT bindings are included
(sorted as Linux driver)
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240725153204.358925-8-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In some cases (consistently in my case with an embedded board) the
ethernet controller will time out on the first init but always succeed
after reset.
Let's reset the controller during probe so we always start with it in a
known state, and don't have wait for the first asix_wait_link() to
time out.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
u-boot-dfu-20240711
Usb gadget:
- A welcome cleanup: epautoconf workaround is dropped to use
.match_ep() instead
- Introduce handle_interrupts() op for USB_GADGET_GENERIC, which
allows a per-driver interrupt handling
Fastboot:
- Fix mssing include when building with TCP only
Replace one type of terrible code formatting with a different
type of terrible code formatting. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Implement .handle_interrupts callback as a replacement for deprecated
dm_usb_gadget_handle_interrupts() function. The new callback allows
for each DM capable USB gadget controller driver to define its own
IRQ handling implementation without colliding with other controller
drivers.
Keep the dm_usb_gadget_handle_interrupts() in this driver for non-DM
case for now, until this driver gets fully converted to DM USB gadget.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240614005309.34433-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce .ops for USB_GADGET_GENERIC uclass. The first new ops is
.handle_interrupts which must be implemented by DM capable USB gadget
controller drivers and must implement interrupt handling similar to
dm_usb_gadget_handle_interrupts(). This patch currently provides weak
dm_usb_gadget_handle_interrupts() implementation which is overridden by
the drivers, but this will be removed once conversion to handle_interrupts
callback is complete.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240614005309.34433-2-marek.vasut+renesas@mailbox.org
[mkorpershoek: fixed trivial typo in commit message]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The only actually used gadget_is_*() functions are the one for DWC3
used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c.
The DWC3 one should be fixed in some separate patch.
Inline the gadget_is_dwc3() and stop using ifdefs in favor of
IS_ENABLED() macro.
The rest of gadget_is_*() calls in usb_ep_autoconfig() can never
be anything but 0, since those gadgets are not supported in U-Boot,
so remove all that unused code. Remove gadget_chips.h as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Link: https://lore.kernel.org/r/20240609213449.194762-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch removes the newly unused function. Linux stopped using this
functionality in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240609213449.194762-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch converts this gadget to use the U-Boot version instead of a
random 2 or 3 plus the UDC number. Linux stopped using this functionality
in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Link: https://lore.kernel.org/r/20240609213449.194762-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch converts this gadget to use the U-Boot version instead of a
random 2 or 3 plus the UDC number. Linux stopped using this functionality
in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240609213449.194762-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This seems to be necessary on my samsung-a5. Without this patch, the
first access of EHCI registers causes a bus stall and subsequent reset.
I am unsure why this wasn't already necessary for db410c, perhaps those
clocks are already enabled on boot.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sam Day <me@samcday.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
For some reason none of these debug prints have newlines, resulting in a
"fun" surprise when attempting to debug this driver.
The other parts of the dwc3 driver have newlines, add them here too (and
fix some minor nearby indent issues to make checkpatch happy).
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Upstream Linux commit 87dd96111b0b.
When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an endpoint
command.
Current implementation only save and restore GUSB2PHYCFG.SUSPHY
configuration. We must save and clear both GUSB2PHYCFG.ENBLSLPM and
GUSB2PHYCFG.SUSPHY settings. Restore them after the command is
completed.
DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240412202611.3565052-5-alexander.sverdlin@siemens.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
