Pass DBSC5 udevice and MODEMR0 register values to board specific
function dbsc5_get_board_data(). The board specific implementation
of dbsc5_get_board_data() can return struct renesas_dbsc5_board_config
which matches the board based on the content of MODEMR0 or content
of DT accessible via the udevice.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Extract wait for completion code from dbsc5_send_dbcmd2() into
new separate function dbsc5_wait_dbwait(). This extracted code
can be used to implement MR register read in the future.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Update dbsc5_send_dbcmd2() such that it takes multiple parameters
instead of one magic register content value. These parameters are
used to form the same resulting register value internally in the
dbsc5_send_dbcmd2() function, but from well defined input constants.
The new input constants are the operation code, channel, rank, and
operation argument. The argument is operation code specific, therefore
it is still a 16-bit magic number, but the rest of the arguments are
now split up. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rename dbsc5_ddr_register_read() to dbsc5_ddr_register_mr27_mr57_read()
and dbsc5_ddr_register_set() to dbsc5_ddr_register_mr28_set() to make
it clear what those functions really do. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make struct renesas_dbsc5_board_config {} definition public via
include/dbsc5.h, so this structure can be defined in board files
and passed into the DBSC5 DRAM driver by overriding weak function
dbsc5_get_board_data() on board level.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add auto-detection and handling of Renesas R-Car V4H-3 and V4H-5
in addition to V4H-7 SoC variants based on OTP fuse programming.
The V4H-3 and V4H-5 variants have reduced DRAM frequency options.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Update the DRAM initialization code to match DBSC5 initialization code
rev.1.10 , which is currently the latest version available. This makes
DRAM initialization operational on Renesas R-Car V4H R8A779G0 rev.3.0.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reinstate missing increment by two in DBTR11 calculation based
on the original DBSC5 initialization code rev.0.80. The original
code did ... ODTLon - (js2[JS2_tODTon_min] - 1) + 1 , which was
incorrectly converted into ODTLon - js2[JS2_tODTon_min], but
should have been converted to ODTLon - js2[JS2_tODTon_min] + 2.
Add the missing +2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The JS1 index is calculated correctly, but the limiter cannot
be the max() function because the index should be lower than
JS1_USABLEC_SPEC_HI and the max() function would unconditionally
override the JS1 index to JS1_USABLEC_SPEC_HI. Use clamp() to
limit the JS1 index instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Fix copy paste error in MD pin handling for 5500 Mbps and 4800 Mbps case,
each should be handled by MD[19,17] == 2 and MD[19,17] == 3 respectively.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add Renesas R-Car Gen4 DBSC5 DRAM controller driver. This driver is currently
capable of bringing LPDDR5 DRAM on Renesas R-Car V4H Whitehawk board. Further
boards can be supported by supplying board specific DRAM configuration data
via dbsc5_get_board_data(). Support for R-Car V4M is not implemented, however
the driver is already mostly prepared to support this SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.
The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
