Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert boards to use text based env. This is the first stage of
conversion, common inclusions should be converted next.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis TK1
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Device tree for this board can be deleted. Device tree location
now points to the freescale/ directory.
Use absolute path to PMIC node entry and its regulators as
device tree in kernel does not provide corresponding labels
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This board clearly develops first in Linux which had more
hardware listed, so let's start to use OF_UPSTREAM.
This makes the NAND driver work.
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds reasonable NAND options to the BCM96846 reference design:
- CMD_NAND, MTD_RAW_NAND
- Disable SYS_NAND_ONFI_DETECTION as this just give error messages
- MTD, MTDPARTS with DM and related config options
- CMD_UBI and CMD_UBIFS as this is likely used with ubi/ubifs
What I didn't add was something like the following:
CONFIG_MTDPARTS_DEFAULT="nand0:256k(cfi),257024k(image)"
Because I don't actually have a BCM96846 reference design. These
are only available to Broadcom and their customers I think,
but perhaps the people at Broadcom can provide the detail of
the flash layout for BCM96846 so we can add this too so the
bcm96846_config is usable out of the box.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The Anbernic RG35XX series of devices are based around an Allwinner
H700 SoC with 1GB of RAM, 2 SD cards, and multiple input buttons.
This bootloader has been tested on the Anbernic RG35XX-2024 and
RG35XX-H, but should be suitable for the entire lineup of H700 based
devices.
A future series of updates will add board selection logic to identify
and load the correct device tree automatically.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> says:
This series adds support for Xilinx qspi parallel and
stacked memeories.
In parallel mode, the current implementation assumes that a maximum
of two flashes are connected. The QSPI controller splits the data
evenly between both the flashes so, both the flashes that are connected
in parallel mode should be identical.
During each operation SPI-NOR sets 0th bit for CS0 & 1st bit for CS1 in
nor->flags.
In stacked mode the current implementation assumes that a maximum of two
flashes are connected and both the flashes are of same make but can differ
in sizes. So, except the sizes all other flash parameters of both the flashes
are identical.
Spi-nor will pass on the appropriate flash select flag to low level driver,
and it will select pass all the data to that particular flash.
Write operation in parallel mode are performed in page size * 2 chunks as
each write operation results in writing both the flashes. For doubling the
address space each operation is performed at addr/2 flash offset, where addr
is the address specified by the user.
Similarly for read and erase operations it will read from both flashes, so
size and offset are divided by 2 and send to flash.
Enable the SPI_ADVANCE config option for all xilinx platforms, as
this is required for parallel-memories.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
By default flash lock option is enabled, enable this option only
when it is required. By disabling the lock config will save some
amount of memory.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
There is no need to define a default for bootcmd in R5 u-boot because
the R5 is directly booting into the next stage A53 bootloader.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22526
- Add DA9063 watchdog support for the imx6q-lxr2 board.
- Add support for DH electronics i.MX8M Plus DHCOM PicoITX
- Add DH i.MX8MP DHCOM SoM on DRC02 carrier board
- Several fsl_esdhc_imx improvements.
- Pas no-mmc-hs400 to mmc2 on imx8mm-cl-iot-gate.
The LXR2 board has a DA9063 that can provide watchdog functionality.
The DA9063 watchdog can cause a full POR reset, which is preferred
over the built-in i.MX6 watchdog.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Add support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.
This system is populated with two ethernet ports, two CANs, RS485 and RS232,
USB, capacitive buttons and an OLED display.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240925160343.84388-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board.
This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR,
LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240928234949.357893-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
When SPL_FS_LOADER is set to y and FS_LOADER is not enabled, the SPL build
fails with the following errors:
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`fw_get_filesystem_firmware':
/u-boot/drivers/misc/fs_loader.c:162: undefined reference to
`fs_set_blk_dev'
arm-none-linux-gnueabihf-ld.bfd: /home/frh/tdx/src/u-boot/drivers/misc/
fs_loader.c:185: undefined reference to `fs_read'
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`select_fs_dev':
/u-boot/drivers/misc/fs_loader.c:89: undefined reference to
`fs_set_blk_dev_with_part'
make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
make: *** [Makefile:2055: spl/u-boot-spl] Error 2
Fix it by replacing the FS_LOADER with SPL_FS_LOADER in the Makefile, so
the fs.c with the necessary function definitions are compiled.
Fixes: b071a07743 ("drivers: misc: Makefile: Enable fs_loader compilation at SPL Level")
Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Add Android bootflow support for AM62X SK EVM board with
new android boot method.
To build for AM62x for Android, we use the
am62x_a53_android.config fragment when building A53 bootloaders:
$ make am62x_evm_a53_defconfig
$ make am62x_a53_android.config
$ make
Co-developed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Add support for the Comvetia i.MX6Q LXR2 board, which is
uses the Phytec PFLA02 SoM.
Based on the original work from Stefano Babic <sbabic@denx.de>.
The Phytec PFLA02 devicetrees are taken from kernel 6.11-rc7.
The imx6q-lxr.dts has been submitted upstream:
https://lore.kernel.org/linux-devicetree/20240913200906.1753458-3-festevam@gmail.com/
After it gets accepted in mainline (most likely in kernel 6.13),
the lxr2 board can then be switched to OF_UPSTREAM and these device trees
can be removed from U-Boot.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Remove unused CONFIG_IMX9_LOW_DRIVE_MODE kconfig and
imx93_11x11_evk_ld_defconfig.
Remove the ld timing file.
The LD mode support will be added back with runtime detection later.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
CI result shows no issue:
https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/22315
----------------------------------------------------------------
- Aspeed: Add AST2700 board (Ibex RISC-V core) support
- Add timer, dram controller, network support
- Sophgo: Add clock controller support for Milk-V Duo
Enable DM_RNG so that the kaslr-seed property is set in the dt allowing
Linux KASLR.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Daniel Schultz <d.schultz@phytec.de> says:
This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:
- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network
Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
Commit 371b379edb ("configs: Make USB_GADGET_MANUFACTURER
consistent over all PHYTEC boards") made the USB_GADGET_MANUFACTURER
value consistent over all PHYTEC boards.
Update the phyCORE-AM62x defconfigs to make this config consistent
as well.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The environment should have a size of 0x20000 instead 0x2000.
Update to have the same environment size for all PHYTEC K3 products.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
This config includes the phycore_am62x_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62x has not enough internal SRAM to support all boot
sources. The normal phycore_am62x_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Merge the am62x_a53_usbdfu.config into the phyCORE-AM62x A53 defconfig to
properly support USB DFU boot.
This config was made with the following command:
make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- \
phycore_am62x_a53_defconfig am62x_a53_usbdfu.config
However, CONFIG_USB_GADGET_MANUFACTURER was not merged to keep Phytec
as manufacturer.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The phyCORE-AM64x board code sets an environment variable 'boot'
with the device U-Boot booted from. Use this variable in
CONFIG_BOOTCOMMAND to boot Linux from the same boot device by
default.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The phyCORE-AM62x board code sets an environment variable 'boot'
with the device U-Boot booted from. Use this variable in
CONFIG_BOOTCOMMAND to boot Linux from the same boot device by
default.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Enable CONFIG_OF_BOARD_SETUP to fixup kernel device tree with mtd
partitions.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Some newer boards end up with a bunch of holes in the memory map due to
how Qualcomm's hypervisor and ABL work. The end result is 14+ memory
regions.
Bump CONFIG_NR_DRAM_BANKS to 24 so we can handle these and any future
expansion easily.
Yes, this is ridiculous, but there is no other way.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
Enable the LMB config in SPL. This helps in testing the LMB code in
SPL on sandbox.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
