Making the setup_mac_from_eeprom optional for boards without
CONFIG_PHYTEC_SOM_DETECTION_BLOCKS.
Signed-off-by: John Ma <jma@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
For phyCORE-i.MX93 SoMs with i.MX93 parts running in VOLT_LOW_DRIVE mode
(SoCs with speed grade fuse set to 900 MHz) reduce usdhc clocks from 400
MHz to 266 MHz. Do this in board code since global imx9 board_fix_fdt()
is not used in case of phycore-imx93 board since commit d3b9b79968
("board: phytec: imx93: Add eeprom-based hardware introspection").
While at it, add a note to ft_board_setup() function to inform that
fixup for Linux device-tree is taken care by ft_system_setup() in imx9
global arch/arm/mach-imx/imx9/soc.c implementation.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27149
- Add support for the NXP imx93 frdm board.
- imx93_evk and phycore-imx93 cleanups.
- Convert imx6dl-sielaff to OF_UPSTREAM and fix serial download mode boot.
- Fix crash in imx power-domain.
- Migrate Phytec imx8mm boards to standard boot.
- Fix smatch warnings.
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
remove boot logic from shared env file for phyboard-polis and
phygate-tauri.
Adjust configs for both boards as well.
Space at the beginning of addressable RAM is reserved for space used via
standard boot env variables. CONFIG_SYS_LOAD_ADDR is set to the lowest
address behind the standard boot variables reserved space.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Drop unused define for PCA9450 PMIC register which is already part of
the header file <power/pca9450.h> since commit 1d0d257043 ("imx93_evk:
spl: update pmic settings").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Enable standard boot for the phycore-imx8mp and use it as default. Add
all variables required for standard boot to the environment.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
With the latest TIFS firmware, an additional virtual interrupt and
event is reserved for TIFS usage on am62x and am62ax devices.
Update the rm-cfg to reflect this new reservation.
Based on commit 87720385ab ("board: ti: rm-cfg: Update rm-cfg to
reflect new resource reservation").
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini <trini@konsulko.com> says:
Hey all,
This is a v3 of Simon's series[1] and depends on the series[2] I posted
the other day that removes <env.h> from <command.h>. With this series
done, I believe we've tackled all of the current cases of headers which
include <env.h> without directly needing it. Much of this series is in
fact Simon's v2 with the main differneces being:
- Removing <env.h> from <net.h> at the end
- Removing env_to_ip() given how little it's used rather than shuffling
around where it's declared and un-inline'ing it. For a rarely used
helper, this ends up being cleaner I think. Especially looking at some
of the users (which called env_get repeatedly). If there's strong
opinion here about using the other method[3] we can do that instead.
- Setting aside for now how to handle CMD_ELF=y and NO_NET=y because
today it's actually fine as we unconditionally build lib/net_utils.c
where string_to_ip() is defined. I'm unsure if a further series is
warranted here or not. We rely on link-time optimization to keep code
readable too.
[1]: https://lore.kernel.org/all/20250501010456.3930701-1-sjg@chromium.org
[2]: https://lore.kernel.org/all/20250514225002.15361-1-trini@konsulko.com
[3]: https://lore.kernel.org/all/20250501010456.3930701-23-sjg@chromium.org
Link: https://lore.kernel.org/r/20250515234154.1859366-1-trini@konsulko.com
Factor out boot device detection from board_late_init() into a new
boot_targets_setup() helper.
Adjust the boot_targets environment variable to favor the device we
just booted from. If boot_targets is still at its default value,
prepend the current boot device to the list; otherwise leave any
user-customized order untouched.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
As part of our migration to the standard boot process, configure the
default values for the bootmeths and boot_targets environment variables.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add fit_addr_r to the environment to allow us to boot from a FIT image.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add fit_addr_r to the environment to allow us to boot from a FIT image.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Migrate to OF_UPSTREAM for phyCORE-i.MX93 since board can use upstream
Linux kernel device-tree for phyBOARD-Segin-i.MX93.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The write_host_id is the last element here and order does matter. This
may have gone unnoticed before as by default all elements are 0, but
if this is updated to a different host, it will not work. Update
the order so write_host_id is the last element in all current secure
board configs.
Reported-by: Prashant Shivhare <p-shivhare@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Add fit_addr_r to the environment to allow us to boot from a FIT image.
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currently, phytec_get_product_name() function only takes care of PCM
SoM type, however in case of PCL, KSM or KSP SoM type it will return
error:
phytec_get_product_name: Invalid SOM type
Add support for other SoM types as defined in phytec_som_type_str enum
(see phytec_som_detection.h) to get rid of the error.
While at it, also simplify switch case statements by grouping them
together. This makes it more concise and readable.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
Add a common RAUC boot logic environment and make use of it in the
i.MX93 environment. The RAUC boot logic is deactivated by default and
can be activated by setting "doraucboot" to "1".
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Leonard Anderweit <l.anderweit@phytec.de>
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Move the default bootcmd from the defconfig to the board environment in
preparation for RAUC support. No change in functionality.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add support for disabling external environment import (bootenv.txt) by
setting the ${no_bootenv} environment variable.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add prepare_mcore script to environment to be able to notify Linux about
the state of M33 core via the kernel cmdline by appending to ${optargs}.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Move the load addresses for FDTs and bootenv.txt to create space for
loading OS image. Otherwise, parts of the image might get corrupted.
and the following boot error will be present:
ERROR: FDT image overlaps OS image (OS=80400000..832a0000)
Moreover, this commit also syncs addresses with downstream PHYTEC
u-boot for i.MX93 in preparation for FIT image support in the future.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Now that capsule update sets the dfu_alt_info environment variable
explicitly, there is no need to support it in the set_dfu_alt_info()
function. Decouple SET_DFU_ALT_INFO from EFI_CAPSULE_FIRMWARE_FIT and
EFI_CAPSULE_FIRMWARE_RAW. For many boards, this was the only use of
set_dfu_alt_info() so remove the function entirely.
Fixes: a9e6f01a94 ("efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for board/libre-computer/*
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de> # for
Provide a defconfig for booting the phycore-am62x via Ethernet.
We need a separate defconfig because the AM62x has not enough internal
SRAM to support all boot sources.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. In this case we can easily fix this
by dropping the select line as the following choice statement handles
things correctly. We also drop the "default false" line as false / n is
the default.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Add the phyCORE-AM62Ax to our common board directory to
enable our SOM detection for this product.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
TI's k3_dfu.env includes redundant dfu_alt_info_* data, some of which
is incompatible with our board configuration. Replace it with a custom
variant that better aligns with our setup, ensuring correct offsets and
eliminating unnecessary entries.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
This config includes the phycore_am62ax_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62Ax has not enough internal SRAM to support all boot
sources. The normal phycore_am62ax_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Provide a common part for our K3 based boards including general details
about environment handling and EFI capsule updates.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Detect RAM size via EEPROM and adjust DDR size and banks accordingly.
Include necessary fixups to handle ECC-enabled configurations.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
