Introduce Voyager board specific code, including
- dram info
- shared cache enabling
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
SPL checks for a magic word in the system manager's scratch
register to determine if an L2 reset has occurred. If detected,
SPL places all slave CPUs (CPU1–3) into WFI mode. The master
CPU (CPU0) then initiates a warm reset by writing to the RMR_EL3
system register and also enters WFI mode.
This warm reset flow is handled entirely within the HPS. The
function `socfpga_sysreset_request()` triggers the warm
reset, and upon SPL re-entry, the updated `lowlevel_init_soc64.S`
handles the necessary initialization.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Put all slave CPUs (CPU1-3) into WFI mode. Master CPU (CPU0) writes
the magic word into system manager's scratch register to indicate
the system has performed L2 reset and request reset manager to
perform hardware handshake and then trigger L2 reset. CPU0 put
itself into WFI mode. L2 reset will reboot all HPS CPU cores after
which all HPS cores are in WFI mode. L2 reset is followed by warm
reset request by SPL via RMR_EL3 system register.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/27236
- Add support for STM32 TIMERS and STM32 PWM on STM32MP25
- Add STM32MP13xx SPL and OpTee-OS start support
- Fix header misuse in stm32 reset drivers
- Fix STMicroelectronics spelling
- Fix clk-stm32h7 wrong macros used in register read
- Fix PRE_CON_BUF_ADDR on STM32MP13
- Fix clock identifier passed to struct scmi_clk_parent_set_in
- Fix stm32 reset for STM32F4/F7 and H7
- Enable OF_UPSTREAM_BUILD_VENDOR for stm32mp13_defconfig
- Add STM32MP23 SoC and stm32mp235f-dk board support
Add the required configuration in the U-Boot env to enable Linux NAND
boot with UBI / UBIFS.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Second set of u-boot-at91 features for the 2025.10 cycle:
This feature set includes the addition of new sama7d65 SoC and a new
board named sama7d65-curiosity.
Enable bootstd.
Update defconfigs to the latest u-boot requirements.
Enable SYS_THUMB_BUILD and LTO and to reduce binary size.
Enable NET_RANDOM_ETHADDR.
Disable JFFS2 support.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Add the basic Kconfig options, addresses and other values for the
existing Kconfig settings for the new Allwinner A523/T527/H728 SoC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Make it possible to update E850-96 firmware binaries using EFI Capsule
Update mechanism. For example, to update the U-Boot binary, the capsule
file can be generated like this:
$ ./tools/mkeficapsule --index 4 \
--guid 629578c3-ffb3-4a89-ac0c-611840727779 \
u-boot.bin capsule4.bin
The resulting 'capsule4.bin' should be copied to ESP partition (in
/boot/efi/EFI/UpdateCapsule/ directory). Then after reboot U-Boot will
update the 'bootloader' area in eMMC Boot Partition A (boot0) and remove
the capsule file, by EFI boot manager executed as a part of Standard
Boot:
Applying capsule capsule4.bin succeeded.
Reboot after firmware update.
The kernel will also expose the ESRT table information via SysFS in
/sys/firmware/efi/esrt/entries.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
There is nothing in this file that makes use of the definitions from
sizes.h and stringify.h.
Remove them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Add r7s72100 Genmai board support. Serial console, NOR Flash and
Ethernet are known to work however on-board SDRAM is not yet enabled.
Signed-off-by: Magnus Damm <damm@opensource.se>
Drop CFG_SH_ETHER_PHY_MODE from configuration files, this value
is never used. No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Drop CFG_SH_ETHER_PHY_ADDR from README and configuration files, this
value is never used, PHY address is extracted from control DT instead.
No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Drop CFG_SH_ETHER_CACHE_WRITEBACK and CFG_SH_ETHER_CACHE_INVALIDATE,
which are now always enabled in the sh_eth driver, because those cache
operations are always available. On architectures which do not implement
cache operations yet, cache operations have to be implemented first.
CFG_SH_ETHER_ALIGNE_SIZE now set as SH_ETHER_ALIGN_SIZE in sh_eth.h
based on architecture and no longer configured on board level.
Remove CFG_SH_ETHER_CACHE_WRITEBACK configuration option from README.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CFG_SH_ETHER_USE_PORT configuration option is a remnant from
before U-Boot DM existed and SH Ethernet made full use of it, and
is no longer used, remove it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
To implement the EFI_SYSTEM_TABLE_POINTER we need 4 MiB aligned
memory.
On the sandbox LMB uses addresses relative to the start of a page aligned
RAM buffer allocated with mmap(). This leads to a mismatch of alignment
between EFI which uses pointers and LMB which uses phys_addr_t.
Ensure that the RAM buffer used for LMB is 4 MiB aligned.
Provide a unit test for efi_alloc_aligned_pages() verifying this alignment.
Do not overwrite RAM size in dram_init().
Link: https://lore.kernel.org/r/20250608075428.32631-1-heinrich.schuchardt@canonical.com
To implement the EFI_SYSTEM_TABLE_POINTER we need 4 MiB aligned
memory.
On the sandbox LMB uses addresses relative to the start of a page aligned
RAM buffer allocated with mmap(). This leads to a mismatch of alignment
between EFI which uses pointers and LMB which uses phys_addr_t.
Ensure that the RAM buffer used for LMB is 4 MiB aligned.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Instead of using defines for the RAM size and base address, retrieve these
information from the devicetree.
This aligns with the sama5d27_som1_ek board in commit 73c1589f02
("board: sama5d27_som1_ek: Get dram size and base from device tree").
While at it, remove a spurious '/* SPL */' comment.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini <trini@konsulko.com> says:
In a private thread, Simon asked about what's needed to get PowerPC
migrated to DM_SERIAL. I went and took a look, and to complete the
entire DM_SERIAL migration (excluding SPL/TPL) we're actually nearly
there. This series first migrates PowerPC (and some NXP Layerscape
boards that share history more clearly with PowerPC parts), with the
biggest change being to make sure we still use the correct legacy
drivers in SPL/TPL (where SPL is extremely constrained). With that out
of the way, I looked at what was left. With two exceptions, it's
platforms which can be trivially enabled for conversion, and so we do
that.
Link: https://lore.kernel.org/r/20250502201226.1369013-1-trini@konsulko.com
Migrate the few ARM Layerscape platforms that had not been switched
along with all remaining PowerPC platforms to DM_SERIAL. For PowerPC,
this means that platforms which use SPL/TPL, keeping the non-DM serial
driver enabled there as they do not use DM. We also rework the guards
on how to define CFG_SYS_NS16550_CLK so that this is mostly in one place
now.
Signed-off-by: Tom Rini <trini@konsulko.com>
The BROM of TH1520 always initializes UART0's parent clock and
configures the baudrate to 115200. Describe the clock frequency to make
UART function correctly in SPL without introducing CCF.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Move unnecessary clock frequency assignment out of device-tree and into the
board config header so that the ns16550 serial driver can successfully init
during SPL after failing to resolve the parent clock from upstream dts. The
serial driver will then resolve clock frequency from device-tree node parent
clock at init during Main app as it is expected by upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Loading a FIT image for kernel, initrd and rootfs on px30 can result in an
memory overlap, resulting in the not 100% helpful message of
"This will not be a case any time" from lmb_fix_over_lap_regions().
Adding a bit of debug info to lmb_fix_over_lap_regions() brings:
lmb_fix_over_lap_regions: base1 0x280000-0x6005ac > base2 0x600000-0x6000d1
So this is because the FIT image gets loaded to the kernel_addr_r at
0x280000 while the pxe-file is already living at 0x600000, only 3.5MB
behind.
In commit 4acc8bb044 ("configs: rockchip: sync ENV_MEM_LAYOUT_SETTINGS
for rk3308, rk3328, and rk3399") FUKAUMI Naoki already brought the memory
layouts for the mentioned socs in sync.
Adjusting the env-layout on px30 to this scheme, magically solves the
overlap issue and also brings px30 more in line with the other mentioned
SoCs.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For the STM32MP15 DHSOM, change the default environment so an AB schema
on a device can be detected.
For this the define "SCAN_DEV_FOR_BOOT_PARTS" is overwritten and
appended.
The detection works by looking for the partitions with specific lables.
The name of those partitions are in the variables and its defaults:
* dh_ab_partname_primary=rootfs-a
* dh_ab_partname_secondary=rootfs-b
To prevent being hanging at bootcmd, enable "CONFIG_BOOT_RETRY" and
"CONFIG_RESET_TO_RETRY", but the timer will only be activated, if the AB
partitions are detected.
Signed-off-by: Pascal Zimmermann <pzimmermann@dh-electronics.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
