Remove CONFIG_SYS_BOOTM_LEN from all riscv defconfigs where the new
default value is used.
Signed-off-by: Martin Herren <sputnik@on-the-web.ch>
Acked-by: Michal Simek <michal.simek@amd.com> # xilinx_mbv
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable the network stack, the designware ethernet driver and
corresponding glue driver. The Lichee Pi 4A board ships two RTL8211F
phys, both attached to GMAC 0, thus support for Realtek phys and DM
support for MDIO devices are enabled as well.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Select PINCTRL_TH1520 in CPU Kconfig entry and update defconfig for
existing TH1520-based boards to ensure PINCTRL is enabled.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
RISC-V software usually expects S mode when leaving the firmware, e.g.
UEFI applications could only run in S mode. Let's convert proper U-Boot
of Lichee Pi 4A port to run in S mode.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
On several RISC-V boards we have seen that 1 MiB is a insufficient value
for CONFIG_SPL_SYS_MALLOC_SIZE.
For instance qemu-riscv32_spl_defconfig fails booting because u-boot.itb
exceeds 1 MiB.
8 MiB is a reasonable value that allows adding FPGA blobs or splash images
to main U-boot.
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Adjust Kconfig and defconfig and add SPL initialization code for
Lichee Pi 4A. Then enable SPL support which we've added for TH1520 SoC
earlier. The board devicetree is changed to use TH1520 binman
configuration to generate bootable images.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable driver for DesignWare MSHC. TH1520 supports all
speed modes up to HS400ES and UHS SDR105.
Also enable ADMA and mmc command.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Enable GPIO command and DWAPB_GPIO driver for LicheePi4A board.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The LMB memory maps are now being maintained through a couple of
alloced lists, one for the available(added) memory, and one for the
used memory. These lists are not static arrays but can be extended at
runtime. Remove the config symbols which were being used to define the
size of these lists with the earlier implementation of static arrays.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add basic config for Sipeed Lichee PI 4A board which make it capable of
booting into serial console.
Reviewed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
