fix the following typos
- from "categorys" to "categories"
- from "indivdually" to "individually"
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Add a spawn command which runs another command in the background, as
well as a wait command to suspend the shell until one or more background
jobs have completed. The job_id environment variable is set by spawn and
wait accepts optional job ids, so that one can selectively wait on any
job.
Example:
=> date; spawn sleep 5; spawn sleep 3; date; echo "waiting..."; wait; date
Date: 2025-02-21 (Friday) Time: 17:04:52
Date: 2025-02-21 (Friday) Time: 17:04:52
waiting...
Date: 2025-02-21 (Friday) Time: 17:04:57
=>
Another example showing how background jobs can make initlizations
faster. The board is i.MX93 EVK, with one spinning HDD connected to
USB1 via a hub, and a network cable plugged into ENET1.
# From power up / reset
u-boot=> setenv autoload 0
u-boot=> setenv ud "usb start; dhcp"
u-boot=> time run ud
[...]
time: 8.058 seconds
# From power up / reset
u-boot=> setenv autoload 0
u-boot=> setenv ud "spawn usb start; spawn dhcp; wait"
u-boot=> time run ud
[...]
time: 4.475 seconds
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The commit cb9ae40a16 ("tools: mkfwumdata: add logic to append vendor
data to the FWU metadata") added support for adding vendor data to mdata
structure but it is not visible anywhere that's why extend fwu command to
dump it.
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Harsha Vardhan V M <h-vm@ti.com> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/20250319084714.335777-1-h-vm@ti.com
Add CMD_FUSE_WRITEBUFF config option to add and enable fuse writebuff
sub-system command. Add fuse_writebuff function to be invoked on
writebuff command.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Given how LIB_RAND is handled now, we should be depending on one of the
implementations and not selecting one of them.
Signed-off-by: Tom Rini <trini@konsulko.com>
The Kconfig parser seems to get confused by the current if conditions
following CMD_NET and displays all network command options directly in
the "Command line interface" menu instead of in a "Network commands"
submenu.
To help out Kconfig we can simplify the if conditions, so that the
definition of CMD_NET is followed immediately by an if/endif block that
contains all network command options. We can also remove nested checks
for CMD_NET or (NET || NET_LWIP).
Fixes: 98ad145db6 ("net: lwip: add DHCP support and dhcp commmand")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Judith Mendez <jm@ti.com> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com
Enable CMD_REMOTEPROC by default if building for K3 ARCH so
that it does not have to be defined in each board defconfig
file.
Signed-off-by: Judith Mendez <jm@ti.com>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add the basic 'hello world ta' command which increment
of the value passed. This provides easy test for
establishing a session with OP-TEE TA and verify.
It includes following "hello world ta" subcommands:
optee hello; default value '0' is passed and gets incremented.
optee hello <value>; value to increment via OP-TEE HELLO
WORLD TA.
To enable the OP-TEE side HELLO WORLD example please refer
https://optee.readthedocs.io/en/latest/building/gits/optee_examples/optee_examples.html
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
This is a debug command to monitor the retention state of the data on
the array. The command needs a duplication of the mtd_read_oob()
function to actually return the maximum number of bitflips encountered
while reading the page. We could write a specific implementation for the
Sunxi driver but this is probably enough.
nand watch <off> <size> - check an area for bitflips
nand watch.part <part> - check a partition for bitflips
nand watch.chip - check the whole device for bitflips
The output may be a bit verbose and could look like:
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Page 0 (0x00000000) -> error -74
Page 1 (0x00000800) -> error -74
Page 2 (0x00001000) -> error -74
Page 3 (0x00001800) -> error -74
Page 4 (0x00002000) -> error -74
Page 5 (0x00002800) -> error -74
Page 6 (0x00003000) -> error -74
Page 7 (0x00003800) -> error -74
Page 8 (0x00004000) -> error -74
Page 9 (0x00004800) -> error -74
Page 10 (0x00005000) -> error -74
Page 11 (0x00005800) -> error -74
Page 12 (0x00006000) -> error -74
Page 13 (0x00006800) -> error -74
Page 14 (0x00007000) -> error -74
Page 15 (0x00007800) -> error -74
Page 16 (0x00008000) -> error -74
Page 17 (0x00008800) -> error -74
Page 18 (0x00009000) -> error -74
Page 19 (0x00009800) -> error -74
Page 20 (0x0000a000) -> error -74
Page 21 (0x0000a800) -> error -74
Page 22 (0x0000b000) -> error -74
Page 23 (0x0000b800) -> error -74
Page 1110 (0x0022b000) -> up to 1 bf/chunk
Page 1122 (0x00231000) -> up to 1 bf/chunk
Page 1132 (0x00236000) -> up to 1 bf/chunk
Page 1362 (0x002a9000) -> up to 1 bf/chunk
Page 4990 (0x009bf000) -> up to 1 bf/chunk
Page 5728 (0x00b30000) -> up to 1 bf/chunk
Page 7116 (0x00de6000) -> up to 1 bf/chunk
Page 7160 (0x00dfc000) -> up to 1 bf/chunk
Page 7494 (0x00ea3000) -> up to 1 bf/chunk
Page 10842 (0x0152d000) -> up to 1 bf/chunk
Page 11614 (0x016af000) -> up to 1 bf/chunk
Page 11970 (0x01761000) -> up to 1 bf/chunk
Page 12536 (0x0187c000) -> up to 1 bf/chunk
Page 12687 (0x018c7800) -> up to 1 bf/chunk
Page 14298 (0x01bed000) -> up to 1 bf/chunk
Page 18268 (0x023ae000) -> up to 1 bf/chunk
Page 18760 (0x024a4000) -> up to 1 bf/chunk
Page 21440 (0x029e0000) -> up to 1 bf/chunk
Page 22336 (0x02ba0000) -> up to 1 bf/chunk
Page 22592 (0x02c20000) -> up to 1 bf/chunk
Page 23872 (0x02ea0000) -> up to 1 bf/chunk
Page 27584 (0x035e0000) -> up to 1 bf/chunk
Page 35008 (0x04460000) -> up to 1 bf/chunk
Page 37184 (0x048a0000) -> up to 1 bf/chunk
Page 41728 (0x05180000) -> up to 1 bf/chunk
Page 42176 (0x05260000) -> up to 1 bf/chunk
Page 43200 (0x05460000) -> up to 1 bf/chunk
Page 43328 (0x054a0000) -> up to 1 bf/chunk
Page 45376 (0x058a0000) -> up to 1 bf/chunk
Page 47040 (0x05be0000) -> up to 1 bf/chunk
Page 47552 (0x05ce0000) -> up to 1 bf/chunk
Page 49344 (0x06060000) -> up to 1 bf/chunk
Page 49856 (0x06160000) -> up to 1 bf/chunk
Page 62784 (0x07aa0000) -> up to 1 bf/chunk
Page 65153 (0x07f40800) -> up to 1 bf/chunk
Page 65228 (0x07f66000) -> up to 1 bf/chunk
Page 65382 (0x07fb3000) -> up to 1 bf/chunk
Page 98624 (0x0c0a0000) -> up to 1 bf/chunk
Page 101952 (0x0c720000) -> up to 1 bf/chunk
Page 107584 (0x0d220000) -> up to 1 bf/chunk
Page 118208 (0x0e6e0000) -> up to 1 bf/chunk
Page 126656 (0x0f760000) -> up to 1 bf/chunk
Page 127680 (0x0f960000) -> up to 1 bf/chunk
Page 129920 (0x0fdc0000) -> up to 1 bf/chunk
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
It is also possible to reduce the output with the .quiet suffix in order
to just show the summary.
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Add a small utility for displaying some information about U-Boot and the
hardware it's running on in a similar fashion to the popular neofetch
tool for Linux [1].
While the output is meant to be useful, it should also be pleasing to
look at and perhaps entertaining. The ufetch command aims to bring this
to U-Boot, featuring a colorful ASCII art version of the U-Boot logo.
[1]: https://en.wikipedia.org/wiki/Neofetch
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8560-QRD
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Let net/wget.c and net/lwip/wget.c depend on CONFIG_WGET, and
cmd/wget.c depend on CONFIG_CMD_WGET. This way, the wget code
can be used regardless of whether the wget command is available.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
With the recent changes of lwip & mbedTLS we can now download from
https:// urls instead of just http://.
Adjust our wget lwip version parsing to support both URLs.
While at it adjust the default TCP window for QEMU since https seems to
require at least 16384
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <sjg@chromium.org>
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <sjg@chromium.org>
In preparation for expanding this command, move it into a separate file.
Rename the function to remove the extra underscore. Update the number of
arguments to 1, since 3 is incorrect.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The real-time clock is needed for most X86 systems and it is useful to
be able to read from it. Enable the rtc command by default.
Signed-off-by: Simon Glass <sjg@chromium.org>
This adds TCPM framework in preparation for fusb302 support, which can
handle USB power delivery messages. This is needed to solve issues with
devices, that are running from a USB-C port supporting USB-PD, but not
having a battery.
Such a device currently boots to the kernel without interacting with
the power-supply at all. If there are no USB-PD message replies within
5 seconds, the power-supply assumes the peripheral is not capable of
USB-PD. It usually takes more than 5 seconds for the system to reach
the kernel and probe the I2C based fusb302 chip driver. Thus the
system always runs into this state. The power-supply's solution to
fix this error state is a hard reset, which involves removing the
power from VBUS. Boards without a battery (or huge capacitors) will
reset at this point resulting in a boot loop.
This imports the TCPM framework from the kernel. The porting has
originally been done by Rockchip using hardware timers and the Linux
kernel's TCPM code from some years ago.
I had a look at upgrading to the latest TCPM kernel code, but that
beast became a lot more complex due to adding more USB-C features.
I believe these features are not needed in U-Boot and with multiple
kthreads and hrtimers being involved it is non-trivial to port them.
Instead I worked on stripping down features from the Rockchip port
to an even more basic level. Also the TCPM code has been reworked
to avoid complete use of any timers (Rockchip used SoC specific
hardware timers + IRQ to implement delayed work mechanism). Instead
the delayed state changes are handled directly from the poll loop.
Note, that (in contrast to the original Rockchip port) the state
machine has the same hard reset quirk, that the kernel has - i.e.
it avoids disabling the CC pin resistors for devices that are not
self-powered. Without that quirk, the Radxa Rock 5B will not just
end up doing a machine reset when a hard reset is triggered, but will
not even recover, because the CPU will loose power and the FUSB302
will keep this state because of leak voltage arriving through the RX
serial pin (assuming a serial adapter is connected).
This also includes a 'tcpm' command, which can be used to get
information about the current state and the negotiated voltage
and current.
Co-developed-by: Wang Jie <dave.wang@rock-chips.com>
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the wget command with NET_LWIP. The command normally
expects a URL: wget [loadaddr] url, but it also accepts the legacy
syntax: wget [loadaddr] [server:]file.
The server IP may alternatively be supplied via ${httpserverip} which
has higher priority than ${serverip}.
Based on code initially developed by Maxim U.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Co-developed-by: Maxim Uvarov <muvarov@gmail.com>
Cc: Maxim Uvarov <muvarov@gmail.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add support for the the ping command with NET_LWIP. The implementation
is derived from lwIP's contrib/apps/ping/ping.c.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Implement do_tftpb(). This implementation of the tftp command
supports an optional port number. For example:
tftp 192.168.0.30:9069:file.bin
It also supports taking the server IP from ${tftpserverip} if
defined, before falling back to ${serverip}.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The clk command cannot provide useful output without a clock driver.
So let it depend on CONFIG_CLK.
Since commit 258c100238 ("cmd: clk: Use dump function from clk_ops")
the remark about deprecation is obsolete. Remove it.
Since commit 7ab418fbe6 ("clk: add support for setting clk rate from
cmdline") the clk command can be used to set clock frequencies. Mention
it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
