Hans de Goede
1262a85fe3
sunxi: axp221: Make dcdc1 voltage configurable
...
The dcdc1 voltage is typically used as generic 3.3V IO voltage for things like
GPIO-s, sdcard interfaces, etc. On most boards this is undervolted to 3.0V to
safe battery, but not on all, make it configurable so that we can use the
same settings as the original firmware on all boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
Acked-by: Ian Campbell <ijc@hellion.org.uk >
2015-01-14 14:56:36 +01:00
Hans de Goede
f70444980b
sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage
...
Some of the ldo-s of the axp221 are used in the same way on most boards, add
comments to the Kconfig help text to reflect this, and give them defaults
matching their typical usage.
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
Acked-by: Ian Campbell <ijc@hellion.org.uk >
2015-01-14 14:56:36 +01:00
Chen-Yu Tsai
a805b7e5da
sun6i: Add new board Merrii Hummingbird A31
...
The Merrii Hummingbird A31 is a A31 based development board with 1G
RAM, 8G NAND, AP6210 WiFi+BT, gigabit ethernet, USB OTG, 2 USB 2.0
ports connected to a USB hub chip, HDMI, VGA, TV and stereo in/out.
Signed-off-by: Chen-Yu Tsai <wens@csie.org >
Acked-by: Hans de Goede <hdegoede@redhat.com >
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
2015-01-14 14:56:36 +01:00
Hans de Goede
0454493aa3
sun6i: Update Colombus defconfig settings
...
The Colombus defconfig settings are missing a number of settings for recently
added features, because we did not know exactly how things were hooked up.
Maxime Ripard has run various tests to get us the necessary details, this
commit updates the defconfig with this info.
This commit also updates the dram clk and zq values with values verified
by Maxime to be the ones used by the original firmware for this board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
Acked-by: Ian Campbell <ijc@hellion.org.uk >
2015-01-14 14:56:36 +01:00
Hans de Goede
b0f25b6f51
sun6i: Add new CSQ_CS908 board
...
The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND,
rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG
controller), ethernet, 3.5 mm jack with a/v out and hdmi out:
http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html
Note it has no sdcard slot and therefore can only be fel booted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
Acked-by: Ian Campbell <ijc@hellion.org.uk >
2015-01-14 14:56:36 +01:00
Hans de Goede
37781a1a7e
sun6i: Make dram clk and zq value Kconfig options
...
It turns out that there is a too large spread between boards to handle this
with a default value, turn this into Kconfig options, and set the values
the factory images are using for the Colombus and Mele_M9 boards.
Note this changes the ZQ default when not overriden through defconfig from
120 to 123, as that is what most boards seem to actually use.
Signed-off-by: Hans de Goede <hdegoede@redhat.com >
Acked-by: Ian Campbell <ijc@hellion.org.uk >
2015-01-14 14:56:36 +01:00
Tom Rini
5f88ed5cde
Merge git://git.denx.de/u-boot-x86
2015-01-13 13:39:25 -05:00
Bin Meng
ade8127a79
x86: Make chromebook_link the default board for coreboot
...
Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link
which is currently the only real board officially supported to run
U-Boot loaded by coreboot.
Note the symbolic link file chromebook_link.dts is deleted and
link.dts is renamed to chromebook_link.dts.
To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86
define needs to be moved to arch/x86/cpu/ivybridge/Kconfig.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com >
Acked-by: Simon Glass <sjg@chromium.org >
2015-01-13 07:25:04 -08:00
Matthias Fuchs
5f1459dc0d
ppc4xx: remove some CPCI405 variants
...
only keep CPCI4052
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:25 -05:00
Matthias Fuchs
5f8f6294a7
ppc4xx: remove G2000 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:25 -05:00
Matthias Fuchs
fc88a5bf79
ppc4xx: remove WUH405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:25 -05:00
Matthias Fuchs
807db88b62
ppc4xx: remove VOH405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:25 -05:00
Matthias Fuchs
d526330479
ppc4xx: remove PMC405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:24 -05:00
Matthias Fuchs
dbe7bb0d21
ppc4xx: remove PCI405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:24 -05:00
Matthias Fuchs
cc6e715f1b
ppc4xx: remove OCRTC board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:24 -05:00
Matthias Fuchs
e434d5d729
ppc4xx: remove HUB405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:24 -05:00
Matthias Fuchs
843125daeb
ppc4xx: remove HH405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:23 -05:00
Matthias Fuchs
7ac9d47a22
ppc4xx: remove DU440 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:23 -05:00
Matthias Fuchs
bc114076dc
ppc4xx: remove DU405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:23 -05:00
Matthias Fuchs
9a4018e09a
ppc4xx: remove DP405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:23 -05:00
Matthias Fuchs
3705726010
ppc4xx: remove CPCIISER4 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:22 -05:00
Matthias Fuchs
2404124c47
ppc4xx: remove CMS700 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:22 -05:00
Matthias Fuchs
b5e7c84f72
ppc4xx: remove ASH405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:22 -05:00
Matthias Fuchs
61b57c4ab9
ppc4xx: remove AR405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:22 -05:00
Matthias Fuchs
2b8a04e551
ppx4xx: remove APC405 board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
2015-01-13 09:37:21 -05:00
Matthias Fuchs
cbdc662a2c
m68k: remove TASREG board
...
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu >
Acked-by: Stefan Roese <sr@denx.de >
2015-01-13 09:37:21 -05:00
Masahiro Yamada
d622ac3927
powerpc: mpc824x: remove MPC824X cpu support
...
All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
Cc: Josef Wagner <Wagner@Microsys.de >
Cc: Torsten Demke <torsten.demke@fci.com >
Cc: Jim Thompson <jim@musenki.com >
Cc: Greg Allen <gallen@arlut.utexas.edu >
2015-01-05 12:08:55 -05:00
Masahiro Yamada
9067b30008
mpc8260: remove atc board support
...
These boards are still non-generic boards.
drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:55 -05:00
Masahiro Yamada
f7e1af8690
mpc8260: remove CPU86, CPU87 board support
...
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:55 -05:00
Masahiro Yamada
e2b1962977
mpc8260: remove ep82xxm board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
2015-01-05 12:08:55 -05:00
Masahiro Yamada
8eecbaf303
mpc8260: remove gw8260 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Oliver Brown <obrown@adventnetworks.com >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
87882f5727
mpc8260: remove IPHASE4539 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Grandegger <wg@denx.de >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
d2fd1d6623
mpc8260: remove muas3001 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Heiko Schocher <hs@denx.de >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
dc0b2fb4a7
mpc8260: remove PM825, PM826, PM828 board support
...
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
b3a2bbe1a4
mpc8260: remove MPC8266ADS board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Rune Torgersen <runet@innovsys.com >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
cc90905f78
mpc8260: remove VoVPN-GW board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
2015-01-05 12:08:54 -05:00
Masahiro Yamada
4ad015bab0
mpc8260: remove ep8260 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Frank Panno <fpanno@delphintech.com >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
793116d2c5
mpc8260: remove ppmc8260 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Brad Kemp <Brad.Kemp@seranoa.com >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
b35c0ad6e6
mpc8260: remove sacsng board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
d19f6a60ec
powerpc: remove cogent_8xx, cogent_mpc8260 board support
...
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Murray Jensen <Murray.Jensen@csiro.au >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
af0e35149b
mpc8xx: remove ESTEEM192E board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Conn Clark <clark@esteem.com >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
5ec71100dc
mpc8xx: remove IP860 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:53 -05:00
Masahiro Yamada
ca620cd149
mpc8xx: remove IVMS8, IVML24 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:52 -05:00
Masahiro Yamada
acc2372db0
mpc8xx: remove lwmon board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:52 -05:00
Masahiro Yamada
f017cd7f71
mpc8xx: remove NETVIA board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Pantelis Antoniou <panto@intracom.gr >
2015-01-05 12:08:52 -05:00
Masahiro Yamada
79cbecb81b
mpc8xx: remove R360MPI board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:52 -05:00
Masahiro Yamada
8737fc7529
mpc8xx: remove RRvision board support
...
This board is still a non-generic board.
Unused code in arch/powerpc/cpu/mpc8xx/video.c should be also deleted
because CONFIG_VIDEO_ENCODER_AD7176, CONFIG_VIDEO_ENCODER_AD7177,
CONFIG_VIDEO_ENCODER_AD7179 are not defined any more.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:52 -05:00
Masahiro Yamada
72ba368f45
mpc8xx: remove SPD823TS board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Wolfgang Denk <wd@denx.de >
2015-01-05 12:08:51 -05:00
Masahiro Yamada
4317d070db
mpc8xx: remove KUP4X, KUP4K board support
...
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: Klaus Heydeck <heydeck@kieback-peter.de >
2015-01-05 12:08:51 -05:00
Masahiro Yamada
3c5b20f1b7
mpc8xx: remove ELPT860 board support
...
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com >
Cc: The LEOX team <team@leox.org >
2015-01-05 12:08:51 -05:00