The option should be 'net_lwip' and not 'net lwip' (see all usage of it
in the test code base).
Fixes: 2bac578c5a ("test: allow multiple config options in buildconfigspec")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The alt name for tispl binary is "tispl.bin" and not "tispl", this patch
fixes the documentation to the correct alt name.
Fixes: def64b4937 ("doc: board: Add document for DFU boot on am62x SoCs")
Fixes: 3633fdbb6b ("ti: add support for AM6254atl SiP")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Include the FDT for Radxa ROCK 5T in the FIT, in addition to those for
5B and 5B+, and add board selection code to load the 5T FDT when the
DRAM type is LPDDR5 and ADC channel 5 value is close to 1016.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Include FDTs for both ROCK 5B and 5B+ in the FIT and add board selection
code to load the 5B+ FDT when the DRAM type is LPDDR5 and ADC channel 5
value is close to 4095.
U-Boot 2025.07 (Jul 14 2025 - 21:28:20 +0000)
Model: Radxa ROCK 5B+
SoC: RK3588
DRAM: 8 GiB
Features tested on a ROCK 5B+ v1.2:
- SD-card boot
- eMMC boot
- SPI flash boot
- PCIe/NVMe
- Ethernet
- USB/TCPM
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
When one attempts to build Tiger and Jaguar from the same directory,
because Tiger will set the IOMUX to 2 but Jaguar doesn't reset it,
Jaguar will have IOMUX set to 2 if built after Tiger.
This isn't an issue if in separate directories or building Tiger after
Jaguar because the default if missing from the configuration file is 0.
Let's make it explicit that the iomux is 0 for Jaguar.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Upstream TF-A has support for RK3588 since v2.12 so let's document how
to use upstream TF-A instead of the prebuilt binary blob from Rockchip
if one wants to do that.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The instructions are regularly out of date because the generated or
prebuilt binaries are updated and the filename doesn't match our
instructions anymore.
Additionally, since commit 55a95caaef15 ("tools: ddrbin_tool: add
ddrbin_tool.py and update to v1.21 20241211") end of October 2024,
ddrbin_tool doesn't exist anymore and has been replaced by
ddrbin_tool.py python script (which currently isn't an executable) so
let's update these instructions as well.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
J742S2 SOC is derivative of J784S4, most of build infra of j784s4 is used
to build u-boot for J742S2 EVM board.
Add guide users on how to build for that board.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The GitHub dependabot tool has reported two "high" priority bugs,
CVE-2025-66418 and CVE-2025-66471, with this package. Update to the
patched version.
Reported-by: GitHub dependabot
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix boot log output not being rendered correctly, fix
it doing the same as done in verdin-am62.rst.
Fixes: b8c43968b8 ("board: toradex: add verdin am62p support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Add the _EXTRA variants of U_BOOT_BUILD_DIR and U_BOOT_RESULT_DIR to the
list of environment variables set for hook scripts.
These were added in commit 8f2a9fa7d6 ("test: Support testing with two
board-builds") but were not documented.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the names of environment variables set for hook scripts. These
have a U_BOOT_ prefix, not UBOOT_.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Document the image preparation and flashing techniques for
Exynos7870-based boards. This is done in a separate file in a
sub-directory, which is linked back to the main documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add support for a generic platform which intends to support multiple
boards powered by ARMv8 Samsung Exynos SoCs. Some important features
include:
* Fastboot: This is present to provide an open alternative to Samsung's
proprietary Odin protocol. The board file configures certain features
for fastboot, such as a dynamically allocated fastboot buffer, and
standardized (lowercase) partition aliases.
* EFI: Kernel image can be loaded from an EFI partition. This
adopts a standard booting process, which multiple OS distributions
can rely on.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Fix typo: `s/u-boot-test-flash1/u-boot-test-flash/`. The correct name of
the script doesn't have a "1" in it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
As stated in PXELINUX doc [1], the PXE configuration file has to be in
the format of "01-MAC-address" for Ethernet connections:
The hardware type (using its ARP "htype" code) and address, all in
lowercase hexadecimal with dash separators. For example, for an
Ethernet (i.e. ARP hardware type "1") with address
"88:99:AA:BB:CC:DD", it would search for the filename
"01-88-99-aa-bb-cc-dd".
Indeed, PXE implementation in U-Boot looks for files like that, as can
be seen from this call chain:
format_mac_pxe()
pxe_mac_path()
pxe_get()
extlinux_pxe_read_bootflow()
Mention the fact that PXE expects the configuration file to be prepended
with "01" in the PXE section of E850-96 documentation. While at it, fix
some other minor issues in PXE section.
[1] https://wiki.syslinux.org/wiki/index.php?title=PXELINUX
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
The SPL_TEXT_BASE for AM62x SiP is set as 0x82000000 whereas the
documentation states 0x81880000 as the PRELOADED_BL33_BASE value.
Both should match to allow TFA to jump to the address where A53 SPL has
been loaded.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Update the TI firmware repository URL from git.ti.com to the
GitHub mirror at github.com/TexasInstruments/ti-linux-firmware
which is much more reliable.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The LVDS Display Interface Transmitter handles the LVDS protocol:
it maps the pixels received from the upstream Pixel-DMA (LTDC)
onto the LVDS PHY.
The LVDS controller driver supports the following high-level features:
• FDP-Link-I and OpenLDI (v0.95) protocols
• Single-Link or Dual-Link operation
• Single-Display or Double-Display (with the same content
duplicated on both)
• Flexible Bit-Mapping, including JEIDA and VESA
• RGB888 or RGB666 output
• Synchronous design, with one input pixel per clock cycle
• No resolution limitation.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add missing dependencies to the pytest usage documentation and correct
the device tree compiler package name from 'dtc' to 'device-tree-compiler'.
This ensures users have the complete list of dependencies needed to run
the pytest test suite without errors.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Anshul Dalal <anshuld@ti.com> says:
This patch series adds support for AM6254atl SiP (or AM62x SiP for
short) to U-Boot.
The OPN (Orderable Part Number) 'AM6254atl' expands as follows[1]:
AM6254atl
||||
|||+-- Feature Lookup (L indicates 512MiB of integrated LPDDR4)
||+--- Device Speed Grade (T indicates 1.25GHz on A53 cores)
|+---- Silicon PG Revision (A indicates SR 1.0)
+----- Core configuration (4 indicates A53's in Quad core config)
AM62x SiP provides the existing AM62x SoC with 512MiB of DDR
integrated in a single packages. The first 4 patches in the series
are cherry-picked from the devicetree-rebasing repository at
'v6.18-rc2-dts'.
Link: https://lore.kernel.org/r/20251025-62sip_support-v3-0-b4c8314d0055@ti.com
TI's AM6254atl (or AM62x SiP for short) provides the existing AM62x SoC
with 512MiB of DDR integrated in a single package.
This patch adds the necessary U-Boot devie tree files, the required
defconfigs along with the documentation for the AM62x SiP EVM.
AM62x SiP differs from the already supported AM62x in following ways:
- OP-TEE for the AM62x resides from 0x9e800000 to 0xa0000000 which needs
to be moved to 0x80080000 to free up space at end of DDR in AM62x SiP
with 512MiB of memory. This is required to allow U-Boot to relocate to
end of DDR before booting to the kernel.
- Changes to the env:
1. splashimage address updated from 0x80200000 to 0x81a00000
2. DFU addresses updated to match updated TEXT_BASE for SPL and U-Boot
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Pull request efi-2026-01-rc2
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/28208
Documentation:
* bootstd: Describe environment variable extension_overlay_addr
environment and remove extension support from TODO list
EFI:
* Correct the detection of the video mode in the EFI payload app:
- Use struct efi_gop_mode_info in the definition of struct
efi_entry_gopmode.
- In function get_mode_from_entry() use the correct type for the video
mode structure.
* Use a valid error code as return value in efi_store_memory_map().
* Avoid a memory leak for the variable name in efi_bl_create_block_device().
* Correct the code indentation in efi_uc_stop().
* Correct the description of struct efi_priv.
* Fix typos in code comments.
Other:
* qfw: Add more fields and a heading to qfw list
* Fix the support for ACPI pass-through on ARM and RISC-V:
Avoid zeroing out the XSDT address
* test: provide unit test for 'acpi list' command
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmkNj/kACgkQxIHbvCwF
# GsS8NQ/6Aj+Z54HJTIEfoXssvElLr5ATactrCxszq42i/yy6dLqa2Ym1afG6w1XS
# 1ZbCeU/bCXFke5Tsz+x89gEfckUm83oTwngwcID0WR1qn8mWjwR7tM5MuORq8NxU
# 7NwLuFs9O/QZihagKdz6hv1/Y+cBwiAYLY16EYVSuUlbLaKQo3QvxwWkqG3jdKWV
# Rm58/PolU+2h04MBwP0SxSduX4OyRF/tMOGjf5RGLyqCyj8kIgdu7PvUAPMM+Gps
# KemL59V0Bdv8hlF4JknmPz+idtZg2nHIDdNrBZvoxwzwGQeRZ1YXAMruRxZXqDYL
# tiuDp6HMv/GfIIGkz14tJtJMdboaAybAnluPWGalx8JQJqJzEPww0R+9s4KKQeWL
# mHgRyl6PxVV9p19f79Qq6q6ETwrFDX0YH3pdrGUk3DBa3lDt0UsEAnuW4FvaJ8tx
# 3PMrjKAxpxocT0hglsMVnptnfvDEigMsjwH/TWrau83mY+juxFQLjm+U4vye+qCa
# 4zXjjLas18+eRcrv2KxU7teakyi1Jp+WbqHq37L26YcQMaLq/RkBc0bTrsreKKLu
# jprYFpvc7EJpH2Fd1XWaZ2EnxXcVSJSvrY/iwRQqb6wbwQ6XGtMvSh3IFY8IzAoh
# N2Pj78oaYqyL1q/TftuZWhEHo3a0M/HfM4D+oMSHzJtWCb0wZHE=
# =OGcS
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Nov 2025 12:21:45 AM CST
# gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4
# gpg: Good signature from "Heinrich Schuchardt <xypron.glpk@gmx.de>" [unknown]
# gpg: aka "[jpeg image of size 1389]" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
This patch adds user documentation for R5 falcon mode for AM62
platforms. The main section is added to am62x_sk.rst and other documents
just include the relevant sections. Steps to build falcon support, usage
and the modified R5 memory map have been documented.
Two svg images have also been added for reference, one for the modified
tifalcon.bin and other for the fitImage format specific to R5 falcon
mode.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Add extension_overlay_addr description to the list of environment
variables that can be useful during the standard boot.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Now that extension support has been added to extlinux and efi bootmeths
we can remove this line from the TODO list.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Update the command to show the size and selected file, since this is
useful information at times. Add a heading so it is clear what each
field refers to.
Add a simple test as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add support for jumping to Linux kernel through OPTEE-OS on ARMv7a.
This is only supported if U-Boot runs in PL1 secure. This change adds
two components, one is fitImage OPTEE-OS loadable handler, which makes
a note of OPTEE-OS being loaded and stores the load address for later
jump to it. The second part is the actual jump to Linux through OPTEE-OS.
The jump through OPTEE-OS requires set up of multiple CPU registers, r1
and r2 are passed through, r0 and r3 have to be set to 0, lr is set to
Linux kernel entry point. This setup is done by new assembler function
boot_jump_linux_via_optee().
The boot_jump_linux_via_optee() also includes STM32MP13xx late TZC
configuration write, this cannot be moved easily, hence the ifdef.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Add test cases to validate FDT and TPM eventlog handoff from TF-A
and OP-TEE via bloblist.
For FDT, the nodes 'reserved-memory' and 'firmware' appended by
OP-TEE indicates a successful handoff.
For TPM eventlog, the events 'SECURE_RT_EL3', 'SECURE_RT_EL1_OPTEE'
and 'SECURE_RT_EL1_OPTEE_EXTRA1' created by TF-A indicates a
successful handoff.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add boot support and peripherals like eMMC/SD, UART, I2C, GPIO, ENETC0/1
and PCIE0/1 for iMX95 15x15 LPDDR4X EVK.
Updated doc for build instructions.
Signed-off-by: Ye Li <ye.li@nxp.com>
Add guide on how to use the Remote Processors on i.MX8M and i.MX93.
Update MAINTAINERS to include doc/board/nxp.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tom Rini