forked from OERV-BSP/u-boot
ColdFire: Update Freescale MCF52x2 platforms
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
This commit is contained in:
TsiChungLiew
@@ -33,18 +33,20 @@
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
#define CONFIG_MCF52x2 /* define processor family */
|
||||
#define CONFIG_M5272 /* define processor type */
|
||||
#define CONFIG_MCF52x2 /* define processor family */
|
||||
#define CONFIG_M5272 /* define processor type */
|
||||
|
||||
#define FEC_ENET
|
||||
#define CONFIG_MCFTMR
|
||||
|
||||
#define CONFIG_MCFUART
|
||||
#define CFG_UART_PORT (0)
|
||||
#define CONFIG_BAUDRATE 19200
|
||||
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
|
||||
|
||||
#define CONFIG_WATCHDOG
|
||||
#undef CONFIG_WATCHDOG
|
||||
#define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */
|
||||
|
||||
#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
|
||||
#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
|
||||
|
||||
/* Configuration for environment
|
||||
* Environment is embedded in u-boot in the second sector of the flash
|
||||
@@ -60,7 +62,6 @@
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
@@ -69,37 +70,82 @@
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_MISC
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_FLASH
|
||||
#define CONFIG_CMD_MEMORY
|
||||
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#undef CONFIG_CMD_LOADB
|
||||
|
||||
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
#define CONFIG_MCFFEC
|
||||
#ifdef CONFIG_MCFFEC
|
||||
# define CONFIG_NET_MULTI 1
|
||||
# define CONFIG_MII 1
|
||||
# define CFG_DISCOVER_PHY
|
||||
# define CFG_RX_ETH_BUFFER 8
|
||||
# define CFG_FAULT_ECHO_LINK_DOWN
|
||||
|
||||
# define CFG_FEC0_PINMUX 0
|
||||
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
|
||||
# define MCFFEC_TOUT_LOOP 50000
|
||||
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
|
||||
# ifndef CFG_DISCOVER_PHY
|
||||
# define FECDUPLEX FULL
|
||||
# define FECSPEED _100BASET
|
||||
# else
|
||||
# ifndef CFG_FAULT_ECHO_LINK_DOWN
|
||||
# define CFG_FAULT_ECHO_LINK_DOWN
|
||||
# endif
|
||||
# endif /* CFG_DISCOVER_PHY */
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MCFFEC
|
||||
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
|
||||
# define CONFIG_IPADDR 192.162.1.2
|
||||
# define CONFIG_NETMASK 255.255.255.0
|
||||
# define CONFIG_SERVERIP 192.162.1.1
|
||||
# define CONFIG_GATEWAYIP 192.162.1.1
|
||||
# define CONFIG_OVERWRITE_ETHADDR_ONCE
|
||||
#endif /* CONFIG_MCFFEC */
|
||||
|
||||
#define CONFIG_HOSTNAME M5272C3
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"loadaddr=10000\0" \
|
||||
"u-boot=u-boot.bin\0" \
|
||||
"load=tftp ${loadaddr) ${u-boot}\0" \
|
||||
"upd=run load; run prog\0" \
|
||||
"prog=prot off ffe00000 ffe3ffff;" \
|
||||
"era ffe00000 ffe3ffff;" \
|
||||
"cp.b ${loadaddr} ffe00000 ${filesize};"\
|
||||
"save\0" \
|
||||
""
|
||||
|
||||
#define CFG_PROMPT "-> "
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_LOAD_ADDR 0x20000
|
||||
|
||||
#define CFG_MEMTEST_START 0x400
|
||||
#define CFG_MEMTEST_END 0x380000
|
||||
|
||||
#define CFG_HZ 1000
|
||||
#define CFG_CLK 66000000
|
||||
|
||||
@@ -108,20 +154,15 @@
|
||||
* (address mappings, register initial values, etc.)
|
||||
* You should know what you are doing if you make changes here.
|
||||
*/
|
||||
|
||||
#define CFG_MBAR 0x10000000 /* Register Base Addrs */
|
||||
|
||||
#define CFG_SCR 0x0003;
|
||||
#define CFG_SPR 0xffff;
|
||||
|
||||
#define CFG_DISCOVER_PHY
|
||||
#define CFG_ENET_BD_BASE 0x380000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CFG_INIT_RAM_ADDR 0x20000000
|
||||
#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
|
||||
#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
|
||||
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
@@ -132,7 +173,7 @@
|
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */
|
||||
#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */
|
||||
#define CFG_FLASH_BASE 0xffe00000
|
||||
|
||||
#ifdef CONFIG_MONITOR_IS_IN_RAM
|
||||
@@ -150,13 +191,13 @@
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization ??
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
|
||||
#define CFG_FLASH_ERASE_TOUT 1000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
@@ -169,25 +210,18 @@
|
||||
*/
|
||||
#define CFG_BR0_PRELIM 0xFFE00201
|
||||
#define CFG_OR0_PRELIM 0xFFE00014
|
||||
|
||||
#define CFG_BR1_PRELIM 0
|
||||
#define CFG_OR1_PRELIM 0
|
||||
|
||||
#define CFG_BR2_PRELIM 0x30000001
|
||||
#define CFG_OR2_PRELIM 0xFFF80000
|
||||
|
||||
#define CFG_BR3_PRELIM 0
|
||||
#define CFG_OR3_PRELIM 0
|
||||
|
||||
#define CFG_BR4_PRELIM 0
|
||||
#define CFG_OR4_PRELIM 0
|
||||
|
||||
#define CFG_BR5_PRELIM 0
|
||||
#define CFG_OR5_PRELIM 0
|
||||
|
||||
#define CFG_BR6_PRELIM 0
|
||||
#define CFG_OR6_PRELIM 0
|
||||
|
||||
#define CFG_BR7_PRELIM 0x00000701
|
||||
#define CFG_OR7_PRELIM 0xFFC0007C
|
||||
|
||||
@@ -197,9 +231,8 @@
|
||||
#define CFG_PACNT 0x00000000
|
||||
#define CFG_PADDR 0x0000
|
||||
#define CFG_PADAT 0x0000
|
||||
#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */
|
||||
#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */
|
||||
#define CFG_PBDDR 0x0000
|
||||
#define CFG_PBDAT 0x0000
|
||||
#define CFG_PDCNT 0x00000000
|
||||
|
||||
#endif /* _M5272C3_H */
|
||||
#endif /* _M5272C3_H */
|
||||
|
||||
Reference in New Issue
Block a user