stv0991: Add basic stv0991 architecture support

stv0991 architecture support added. It contains the support for following blocks - Timer - uart Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Add arch/arm/cpu/armv7/Makefile hunk] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-18 10:42:22 -08:00
parent 32fdf0e4d8
commit 9fa32b1237
22 changed files with 764 additions and 0 deletions
--- a/arch/arm/cpu/armv7/stv0991/timer.c
+++ b/arch/arm/cpu/armv7/stv0991/timer.c
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-stv0991/hardware.h>
+#include <asm/arch-stv0991/stv0991_cgu.h>
+#include <asm/arch-stv0991/stv0991_gpt.h>
+
+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
+				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
+
+#define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
+#define GPT_RESOLUTION	(CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+int timer_init(void)
+{
+	/* Timer1 clock configuration */
+	writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
+	writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
+			TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
+
+	/* Stop the timer */
+	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+	writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
+	/* Configure timer for auto-reload */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
+			&gpt1_regs_ptr->cr1);
+
+	/* load value for free running */
+	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
+
+	/* start timer */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
+			&gpt1_regs_ptr->cr1);
+
+	/* Reset the timer */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer_masked();
+	ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
+	ulong rndoff;
+
+	rndoff = (usec % 10) ? 1 : 0;
+
+	/* tenudelcnt timer tick gives 10 microsecconds delay */
+	tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+	while ((ulong) (get_timer_masked() - start) < tmo)
+		;
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER();
+
+	if (now >= lastdec) {
+		/* normal mode */
+		timestamp += now - lastdec;
+	} else {
+		/* we have an overflow ... */
+		timestamp += now + GPT_FREE_RUNNING - lastdec;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked(unsigned long usec)
+{
+	return udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_STV0991_HZ;
+}